Hi Am 09.02.22 um 10:03 schrieb Javier Martinez Canillas:
Add support to convert XR24 and 8-bit grayscale to reversed monochrome for drivers that control monochromatic panels, that only have 1 bit per pixel.The drm_fb_gray8_to_mono_reversed() helper was based on the function that does the same in the drivers/gpu/drm/tiny/repaper.c driver. Signed-off-by: Javier Martinez Canillas <javi...@redhat.com> --- Changes in v3: - Also add a drm_fb_xrgb8888_to_mono_reversed() helper (Thomas Zimmermann) - Split lines copy to drm_fb_gray8_to_mono_reversed_line() (Thomas Zimmermann) - Handle case where the source buffer is not aligned to 8 (Thomas Zimmermann) drivers/gpu/drm/drm_format_helper.c | 157 ++++++++++++++++++++++++++++ include/drm/drm_format_helper.h | 8 ++ 2 files changed, 165 insertions(+) diff --git a/drivers/gpu/drm/drm_format_helper.c b/drivers/gpu/drm/drm_format_helper.c index b981712623d3..19710342c0de 100644 --- a/drivers/gpu/drm/drm_format_helper.c +++ b/drivers/gpu/drm/drm_format_helper.c @@ -591,3 +591,160 @@ int drm_fb_blit_toio(void __iomem *dst, unsigned int dst_pitch, uint32_t dst_for return -EINVAL; } EXPORT_SYMBOL(drm_fb_blit_toio); + +static void drm_fb_gray8_to_mono_reversed_line(u8 *dst, const u8 *src, unsigned int pixels, + unsigned int start_offset, unsigned int end_offset) +{ + unsigned int xb, i; + + for (xb = 0; xb < pixels; xb++) { + unsigned int start = 0, end = 8; + u8 byte = 0x00; + + if (xb == 0 && start_offset) + start = start_offset; + + if (xb == pixels - 1 && end_offset) + end = end_offset;
end_offset should be called end_len, because it is the number of bits in the final byte; but not the offset of the final bit.
+ + for (i = start; i < end; i++) { + unsigned int x = xb * 8 + i; + + byte >>= 1; + if (src[x] >> 7) + byte |= BIT(7); + } + *dst++ = byte; + } +} + +/** + * drm_fb_gray8_to_mono_reversed - Convert grayscale to reversed monochrome + * @dst: reversed monochrome destination buffer + * @dst_pitch: Number of bytes between two consecutive scanlines within dst + * @src: 8-bit grayscale source buffer + * @fb: DRM framebuffer + * @clip: Clip rectangle area to copy + * + * DRM doesn't have native monochrome or grayscale support. + * Such drivers can announce the commonly supported XR24 format to userspace + * and use drm_fb_xrgb8888_to_gray8() to convert to grayscale and then this + * helper function to convert to the native format. + */ +void drm_fb_gray8_to_mono_reversed(void *dst, unsigned int dst_pitch, const void *vaddr, + const struct drm_framebuffer *fb, + const struct drm_rect *clip) +{ + + unsigned int linepixels = drm_rect_width(clip); + unsigned int lines = drm_rect_height(clip); + unsigned int start_offset, end_offset; + unsigned int y; + const u8 *gray8 = vaddr; + u8 *mono = dst; + + /* + * The reversed mono destination buffer contains 1 bit per pixel + * and destination scanlines have to be in multiple of 8 pixels. + */ + if (!dst_pitch) + dst_pitch = DIV_ROUND_UP(linepixels, 8); + + /* + * For damage handling, it is possible that only parts of the source + * buffer is copied and this could lead to start and end pixels that + * are not aligned to multiple of 8. + * + * Calculate if the start and end pixels are not aligned and set the + * offsets for the reversed mono line conversion function to adjust. + */ + start_offset = clip->x1 % 8; + end_offset = clip->x2 % 8; + + for (y = 0; y < lines; y++) { + drm_fb_gray8_to_mono_reversed_line(mono, gray8, dst_pitch, + start_offset, end_offset); + gray8 += fb->pitches[0]; + mono += dst_pitch; + } +}
Do you really need that function. It's not exported and if it's not otherwise used, I'd just remove it. We don't keep unused interfaces around.
+ +/** + * drm_fb_xrgb8888_to_mono_reversed - Convert XRGB8888 to reversed monochrome + * @dst: reversed monochrome destination buffer + * @dst_pitch: Number of bytes between two consecutive scanlines within dst + * @src: XRGB8888 source buffer + * @fb: DRM framebuffer + * @clip: Clip rectangle area to copy + * + * DRM doesn't have native monochrome support. + * Such drivers can announce the commonly supported XR24 format to userspace + * and use this function to convert to the native format. + * + * This function uses drm_fb_xrgb8888_to_gray8() to convert to grayscale and + * then the result is converted from grayscale to reversed monohrome. + */ +void drm_fb_xrgb8888_to_mono_reversed(void *dst, unsigned int dst_pitch, const void *vaddr, + const struct drm_framebuffer *fb, const struct drm_rect *clip) +{ + unsigned int linepixels = drm_rect_width(clip); + unsigned int lines = clip->y2 - clip->y1; + unsigned int cpp = fb->format->cpp[0]; + unsigned int len_src32 = linepixels * cpp; + unsigned int start_offset, end_offset; + unsigned int y; + u8 *mono = dst, *gray8; + u32 *src32; + + if (WARN_ON(fb->format->format != DRM_FORMAT_XRGB8888)) + return; + + /* + * The reversed mono destination buffer contains 1 bit per pixel + * and destination scanlines have to be in multiple of 8 pixels. + */ + if (!dst_pitch) + dst_pitch = DIV_ROUND_UP(linepixels, 8);
I'd do a warn_once if (dst_pitch % 8 != 0).
+ + /* + * The cma memory is write-combined so reads are uncached. + * Speed up by fetching one line at a time.
I once had a patchset that adds caching information to struct dma_buf_map (soon to be named struct iosys_map). Blitting helpers would be able to enable/disable this optimization as needed.
However, your driver doesn't use CMA. It's backed by SHMEM. Do you really want to keep that code in?
+ */ + src32 = kmalloc(len_src32, GFP_KERNEL); + if (!src32) + return; + + /* + * Copies are done line-by-line, allocate an intermediate + * buffer to copy the gray8 lines and then convert to mono. + */ + gray8 = kmalloc(linepixels, GFP_KERNEL); + if (!gray8) + goto free_src32;
If might be faster to allocate both buffers in one step and set the pointers into the allocated buffer.
+ + /* + * For damage handling, it is possible that only parts of the source + * buffer is copied and this could lead to start and end pixels that + * are not aligned to multiple of 8. + * + * Calculate if the start and end pixels are not aligned and set the + * offsets for the reversed mono line conversion function to adjust. + */ + start_offset = clip->x1 % 8; + end_offset = clip->x2 % 8;
end_len, again. If you have 1 single bit set in the final byte, the offset is 0, but the length is 1. Best regards Thomas
+ + vaddr += clip_offset(clip, fb->pitches[0], cpp); + for (y = 0; y < lines; y++) { + src32 = memcpy(src32, vaddr, len_src32); + drm_fb_xrgb8888_to_gray8_line(gray8, src32, linepixels); + drm_fb_gray8_to_mono_reversed_line(mono, gray8, dst_pitch, + start_offset, end_offset); + vaddr += fb->pitches[0]; + mono += dst_pitch; + } + + kfree(gray8); +free_src32: + kfree(src32); +} +EXPORT_SYMBOL(drm_fb_xrgb8888_to_mono_reversed); diff --git a/include/drm/drm_format_helper.h b/include/drm/drm_format_helper.h index b30ed5de0a33..6638da9e9774 100644 --- a/include/drm/drm_format_helper.h +++ b/include/drm/drm_format_helper.h @@ -43,4 +43,12 @@ int drm_fb_blit_toio(void __iomem *dst, unsigned int dst_pitch, uint32_t dst_for const void *vmap, const struct drm_framebuffer *fb, const struct drm_rect *rect);+void drm_fb_gray8_to_mono_reversed(void *dst, unsigned int dst_pitch, const void *src,+ const struct drm_framebuffer *fb, + const struct drm_rect *clip); + +void drm_fb_xrgb8888_to_mono_reversed(void *dst, unsigned int dst_pitch, const void *src, + const struct drm_framebuffer *fb, + const struct drm_rect *clip); + #endif /* __LINUX_DRM_FORMAT_HELPER_H */
-- Thomas Zimmermann Graphics Driver Developer SUSE Software Solutions Germany GmbH Maxfeldstr. 5, 90409 Nürnberg, Germany (HRB 36809, AG Nürnberg) Geschäftsführer: Ivo Totev
OpenPGP_signature
Description: OpenPGP digital signature