On Tue, Mar 22, 2022 at 05:37:40PM -0400, Lyude Paul wrote: > OK so - this has become a bit of a larger rabbit hole. I've been putting quite > a bit of work into this and I think I'm starting to make some progress - > although on a different aspect of this issue. After talking with danvet they > realized that we're also potentially not handling encoder stealing with MST > correctly - which we need to do in order to know that we're correctly pulling > in every related crtc/connector into the state - along with avoiding encoder > conflicts if something tries to use a GPU's DP encoder in SST mode while it's > driving other displays in MST mode. > > So - it seems this will likely need to be solved first before we can deal with > ensuring that we perform the correct CRTC waits in atomic commits with the MST > helpers. This has been pretty painful to figure out, but I think I'm starting > to make some progress - but I'd really appreciate getting some feedback on > this approach I've came up with so I maybe can skip having to rewrite it > later. > > So: to clarify the problem, it boils down to something like this: > > State 1: > * DP-1 (hosts MST topology, so is disconnected + no encoder) > * MST topology > * DP-2 (has display) > * DP-3 (has display) > (In hardware) > * drm_encoder A drives: > * DP-2 > * DP-3 > (In software) > * drm_encoder A unused > * Fake MST drm_encoder B -> DP-2 > * Fake MST drm_encoder C -> DP-3 > > Problems: > * DP-1 gets disconnected, MST topology disappears > * We disable maybe 1 display > * DP-1 is disconnected, suddenly replaced with SST display > * Driver tries to assign drm_encoder A to new DP-1 display > *** Error! drm_encoder A is still driving fake encoders B and C *** > > > I'm not sure if the exact above example would actually happen - you > might need to do some tricks to get it into such a state. But you get > the general idea - there's missing coverage with how we handle encoder > conflicts when it comes to encoders that aren't directly handling CRTCs. > If we can fix this, I think we should be able to reliably figure out > every CRTC involved in modesets like this - and ensure that nonblocking > modesets come up with the right CRTC dependencies. > > My current idea for handling this is as follows: > * Add the following fields to drm_connector_state: > * reserved_encoder → an encoder that is "reserved" by the connector, > but is not directly attached to a monitor. Note reserved > connectors cannot have CRTCs attached to them. When a connector > has no more CRTCs reserved, it should lose it's reserved encoder. > * dependent_crtcs → a bitmask of CRTCs that depend on this > connector's state, but are not directly attached to it. > * Add the following fields to drm_crtc_state: > * connector_dependency → a connector whose state this CRTC relies > on, but is not directly attached to. This connector must be pulled > into the atomic state whenever this CRTC requires a modeset. > > The reason for adding all of these fields to drm_connector_state and > drm_crtc_state is because I don't think it's possible for us to rely on > a particular private object being in all atomic states - so we need a > way for the DRM core to be able to understand these object relationships > on it's own and reference them from any type of atomic state change so > that we can pull in dependent CRTCs as needed.
Why would tracking the mst private state object not be good enough? In any of the modesets which touch mst state you'd need to grab the mst state to change anything anyway (or there's a quite serious driver bug somewhere), so the private object should always be part of actual modeset changes. Maybe there's some creative ways for drivers to get this wrong, but then I think it'd be better to think about how to prevent those than work around it. Since doing an mst modeset without having the mst state handy sounds rather broken irrespective of nonblocking atomic commit issues. > From there, we'd just: > * Add some functions to handle these new fields, something like: > * drm_atomic_reserve_crtc_for_connector(crtc, encoder, conn_state) > * drm_atomic_release_crtc_from_connector(crtc, conn_state) > * Teach the various DRM core functions how to handle these new fields > > Does this seem like I'm on the right track so far? JFYI - I've been busy > trying to write up some patches for this, but there's definitely a lot > of code to go through and change. tbh your entire scheme feels like adding commit tracking for private state objects, except we somehow don't track it on the private state itself, but instead spread it all around to semi-related existing modeset objects. And note that wrt the atomic commit machinery, drm_encoder isn't even a modeset object (it has no state of its own and is fully tracked by the (crtc, connector) combo). So this all feels very backwards. Plus vc4 shows that there's other cases where tracking on the private state object is needed, mst wouldn't be the only thing. Your scheme would not be useful for vc4 at all, only for mst dependency tracking. Also the encoder has the additional fun that there's multiple fake encoders for a single real mst port, whereas the mst state is an actual single struct per mst port. Note that drm_crtc_commit is intentionally a stand-alone refcounted thing, so that it can attached to random other pieces for tracking dependencies, and we do attache them to various pieces all over already (for connector and plane switching). Your proposal is inventing a new way to track cross-crtc dependencies, and I'm confused why that's needed. I guess in all this I don't get in what way your proposal here is better than just adding dependency tracking to private state structs? Cheers, Daniel > > On Wed, 2022-03-16 at 16:28 -0400, Lyude Paul wrote: > > On Wed, 2022-03-16 at 13:01 +0200, Ville Syrjälä wrote: > > > On Mon, Mar 14, 2022 at 06:16:36PM -0400, Lyude Paul wrote: > > > > Hi! First a little bit of background: I've recently been trying to get > > > > rid > > > > of > > > > all of the non-atomic payload bandwidth management code in the MST > > > > helpers > > > > in > > > > order to make it easier to implement DSC and fallback link rate > > > > retraining > > > > support down the line. Currently bandwidth information is stored in two > > > > places, partially in the MST atomic state and partially in the mst > > > > manager's > > > > payload table (which exists outside of the atomic state and has its own > > > > locking). The portions in the atomic state are used to try to determine > > > > if > > > > a > > > > given display configuration can fit within the given bandwidth > > > > limitations > > > > during the atomic check phase, and are implemented through the use of > > > > private > > > > state objects. > > > > > > > > My current goal has been to move as much of this as possible over to the > > > > atomic state and entirely get rid of the payload table along with it's > > > > locks. > > > > My main reason for doing this is that it both decomplicates things quite > > > > a > > > > bit, and I'm really also hoping that getting rid of that payload code > > > > will > > > > make it clearer to others how it works - and stop the influx of bandaid > > > > patches (e.g. adding more and more special cases to MST to fix poorly > > > > understood issues being hit in one specific driver and nowhere else) > > > > that > > > > I've > > > > had to spend way more time then I'd like trying to investigate and > > > > review. > > > > > > > > So, the actual problem: following a conversation with Daniel Vetter > > > > today > > > > I've > > > > gotten the impression that private modesetting objects are basically > > > > just > > > > broken with parallel modesets? I'm still wrapping my head around all of > > > > this > > > > honestly, but from what I've gathered: CRTC atomic infra knows how to do > > > > waits > > > > in the proper places for when other CRTCs need to be waited on to > > > > continue > > > > a > > > > modeset, but there's no such tracking with private objects. If I > > > > understand > > > > this correctly, that means that even if two CRTC modesets require > > > > pulling > > > > in > > > > the same private object state for the MST mgr: we're only provided a > > > > guarantee > > > > that the atomic checks pulling in that private object state won't > > > > concurrently. But when it comes to commits, it doesn't sound like > > > > there's > > > > any > > > > actual tracking for this and as such - two CRTC modesets which have both > > > > pulled in the MST private state object are not prevented from running > > > > concurrently. > > > > > > > > This unfortunately throws an enormous wrench into the MST atomic > > > > conversion > > > > I've been working on - as I was under the understanding while writing > > > > the > > > > code > > > > for this that all objects in an atomic state are blocked from being used > > > > in > > > > any new atomic commits (not checks, as parallel checks should be fine in > > > > my > > > > case) until there's no commits active with said object pulled into the > > > > atomic > > > > state. I certainly am not aware of any way parallel modesetting could > > > > actually > > > > be supported on MST, so it's not really a feature we want to deal with > > > > at > > > > all > > > > besides stopping it from happening. This also unfortunately means that > > > > the > > > > current atomic modesetting code we have for MST is potentially broken, > > > > although I assume we've never hit any real world issues with it because > > > > of > > > > the > > > > non-atomic locking we currently have for the payload table. > > > > > > > > So, Daniel had mentioned that supposedly you've been dealing with > > > > similar > > > > issues with VC4 and might have already made progress on coming up with > > > > ways to > > > > deal with it. If this is all correct, I'd definitely appreciate being > > > > able > > > > to > > > > take a look at your work on this to see how I can help move things > > > > forward. > > > > I've got a WIP of my atomic only MST branch as well: > > > > > > > > https://gitlab.freedesktop.org/lyudess/linux/-/commits/wip/mst-atomic-only-v1 > > > > > > > > However it's very certainly broken right now (it compiles and I had > > > > thought it > > > > worked already, but I realized I totally forgot to come up with a way of > > > > doing > > > > bookkeeping for VC start slots atomically - which is what led me down > > > > this > > > > current rabbit hole), but it should at least give a general idea of what > > > > I'm > > > > trying to do. > > > > > > > > Anyway, let me know what you think. > > > > > > For MST in particular parallel modeset on the same physical link sounds > > > pretty crazy to me. Trying to make sure everything happens in the right > > > order would not be pleasant. I think a simple solution would be just to > > > add all the crtcs on the affected link to the state and call it a day. > > > > JFYI I definitely don't have any kind of plan to try parallel modesetting > > with > > MST, I think it'd be near impossible to actually get working correctly for > > pretty little benefit :). I was just not entirely sure of the work that > > would > > be required to get private objects to do the right thing here in parallel > > modesets (e.g. make sure we wait on all CRTC commits like you mentioned). > > > > Anyway - I looked at the code for this the other day and a solution that > > seems > > pretty reasonable for this to me would be to add a hook for DRM private > > objects which provides drivers a spot to inform the DRM core what > > drm_crtc_commits need to be waited on before starting a modeset. I should > > have > > some patches on the list soon so folks can tell me if what I'm doing looks > > sensible or not :). > > > > > > > > i915 already does that on modern platforms actually because the > > > hardware architecture kinda needs it. Although we could perhaps > > > optimize it a bit to skip it in some cases, but not sure the > > > extra complexity would really be justified. > > > > > > In i915 we also serialize *all* modesets by running them on a > > > ordered wq (+ explicit flush_workqueue() to serialize non-blocking > > > vs. blocking modesets). We did semi-accidentally enable parallel > > > modesets once but I undid that because there was just way too much > > > pre-existing code that wasn't even considering the possibility of > > > a parallel modeset, and I didn't really feel like reviewing the > > > entire codebase to find all of it. > > > > > > > -- > Cheers, > Lyude Paul (she/her) > Software Engineer at Red Hat > -- Daniel Vetter Software Engineer, Intel Corporation http://blog.ffwll.ch