On Thu, Nov 24, 2022 at 06:20:54PM +0800, Pin-yen Lin wrote:
> Register USB Type-C mode switches when the "mode-switch" property and
> relevant port are available in Device Tree. Configure the crosspoint
> switch based on the entered alternate mode for a specific Type-C
> connector.

...

> +static void anx7625_typec_two_ports_update(struct anx7625_data *ctx)
> +{
> +     if (ctx->typec_ports[0].dp_connected && 
> ctx->typec_ports[1].dp_connected)
> +             /* Both ports available, do nothing to retain the current one. 
> */
> +             return;

> +     else if (ctx->typec_ports[0].dp_connected)

This 'else' is redundant. I would rewrite above as

        /* Check if both ports available and do nothing to retain the current 
one */
        if (ctx->typec_ports[0].dp_connected && 
ctx->typec_ports[1].dp_connected)
                return;

        if (ctx->typec_ports[0].dp_connected)

> +             anx7625_set_crosspoint_switch(ctx, TYPEC_ORIENTATION_NORMAL);
> +     else if (ctx->typec_ports[1].dp_connected)
> +             anx7625_set_crosspoint_switch(ctx, TYPEC_ORIENTATION_REVERSE);
> +}

...

> +     data->dp_connected = (state->alt && state->alt->svid == 
> USB_TYPEC_DP_SID &&
> +                           state->alt->mode == USB_TYPEC_DP_MODE);

Parentheses are not needed.

...

> +     /*
> +      * <0 1> refers to SSRX1/SSTX1, and <2 3> refers to SSRX2/SSTX2.
> +      */
> +     for (i = 0; i < num_lanes; i++) {

> +             if (port_num != -1 && port_num != dp_lanes[i] / 2) {
> +                     dev_err(dev, "Invalid data lane numbers\n");
> +                     return -EINVAL;
> +             }

According to Rob Linux must not validate device tree. If you need it, use
proper YAML schema.

> +             port_num = dp_lanes[i] / 2;
> +     }

...

> +     if (!ctx->num_typec_switches) {
> +             dev_warn(dev, "No Type-C switches node found\n");

> +             return ret;

Why not to return 0 explicitly?

> +     }

...

> +     ctx->typec_ports = devm_kcalloc(

Broken indentation.

> +             dev, ctx->num_typec_switches, sizeof(struct anx7625_port_data),
> +             GFP_KERNEL);
> +     if (!ctx->typec_ports)
> +             return -ENOMEM;

...

> +struct anx7625_port_data {

> +     bool dp_connected;

You can save some bytes on some architectures if move this to be last field.

> +     struct typec_mux_dev *typec_mux;
> +     struct anx7625_data *ctx;
> +};

-- 
With Best Regards,
Andy Shevchenko


Reply via email to