On 12/05/2023 15:11, Neil Armstrong wrote: > The Amlogic G12A, G12B & SM1 SoCs embeds a Synopsys DW-MIPI-DSI transceiver > (ver 1.21a), > with a custom glue managing the IP resets, clock and data input similar to > the DW-HDMI Glue > on the same Amlogic SoCs.
Please wrap commit message according to Linux coding style / submission process (neither too early nor over the limit): https://elixir.bootlin.com/linux/v5.18-rc4/source/Documentation/process/submitting-patches.rst#L586 Subject: drop second/last, redundant "bindings". The "dt-bindings" prefix is already stating that these are bindings. > > Signed-off-by: Neil Armstrong <narmstr...@baylibre.com> > Signed-off-by: Neil Armstrong <neil.armstr...@linaro.org> > --- > .../display/amlogic,meson-g12a-dw-mipi-dsi.yaml | 117 > +++++++++++++++++++++ > 1 file changed, 117 insertions(+) > > diff --git > a/Documentation/devicetree/bindings/display/amlogic,meson-g12a-dw-mipi-dsi.yaml > > b/Documentation/devicetree/bindings/display/amlogic,meson-g12a-dw-mipi-dsi.yaml > new file mode 100644 > index 000000000000..8169c7e93ff5 > --- /dev/null > +++ > b/Documentation/devicetree/bindings/display/amlogic,meson-g12a-dw-mipi-dsi.yaml > @@ -0,0 +1,117 @@ > +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) > +# Copyright 2020 BayLibre, SAS > +%YAML 1.2 > +--- > +$id: > http://devicetree.org/schemas/display/amlogic,meson-g12a-dw-mipi-dsi.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Amlogic specific extensions to the Synopsys Designware MIPI DSI Host > Controller > + > +maintainers: > + - Neil Armstrong <neil.armstr...@linaro.org> > + > +description: | > + The Amlogic Meson Synopsys Designware Integration is composed of > + - A Synopsys DesignWare MIPI DSI Host Controller IP > + - A TOP control block controlling the Clocks & Resets of the IP > + > +allOf: > + - $ref: dsi-controller.yaml# > + > +properties: > + compatible: > + enum: > + - amlogic,meson-g12a-dw-mipi-dsi > + > + reg: > + maxItems: 1 > + > + clocks: > + minItems: 3 Missing maxItems > + > + clock-names: > + minItems: 3 > + items: > + - const: pclk > + - const: bit_clk > + - const: px_clk > + - const: meas_clk Drop _clk suffixes. pclk can stay, it's a bit odd but recently Rob clarified that suffix with underscore should not be there. > + > + resets: > + minItems: 1 maxItems instead > + > + reset-names: > + items: > + - const: top > + > + phys: > + minItems: 1 Ditto > + > + phy-names: > + items: > + - const: dphy > + > + ports: > + $ref: /schemas/graph.yaml#/properties/ports > + > + properties: > + port@0: > + $ref: /schemas/graph.yaml#/properties/port > + description: Input node to receive pixel data. > + > + port@1: > + $ref: /schemas/graph.yaml#/properties/port > + description: DSI output node to panel. > + > + required: > + - port@0 > + - port@1 > + > +required: > + - compatible > + - reg > + - clocks > + - clock-names > + - resets > + - reset-names > + - phys > + - phy-names > + - ports > + > +unevaluatedProperties: false > + > +examples: > + - | > + dsi@7000 { > + compatible = "amlogic,meson-g12a-dw-mipi-dsi"; > + reg = <0x6000 0x400>; Your reg does not match unit address. The dt_binding_check should actually complain about it. Best regards, Krzysztof