On SM6125 the dispcc block is gated behind VDDCX: allow this domain to be configured.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlow...@linaro.org> Signed-off-by: Marijn Suijten <marijn.suij...@somainline.org> --- .../devicetree/bindings/clock/qcom,dispcc-sm6125.yaml | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) diff --git a/Documentation/devicetree/bindings/clock/qcom,dispcc-sm6125.yaml b/Documentation/devicetree/bindings/clock/qcom,dispcc-sm6125.yaml index 8fd29915bf2c..0a3ef7fd03fa 100644 --- a/Documentation/devicetree/bindings/clock/qcom,dispcc-sm6125.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,dispcc-sm6125.yaml @@ -48,6 +48,16 @@ properties: '#power-domain-cells': const: 1 + power-domains: + description: + A phandle and PM domain specifier for the CX power domain. + maxItems: 1 + + required-opps: + description: + A phandle to an OPP node describing the power domain's performance point. + maxItems: 1 + reg: maxItems: 1 @@ -65,9 +75,11 @@ examples: - | #include <dt-bindings/clock/qcom,rpmcc.h> #include <dt-bindings/clock/qcom,gcc-sm6125.h> + #include <dt-bindings/power/qcom-rpmpd.h> clock-controller@5f00000 { compatible = "qcom,sm6125-dispcc"; reg = <0x5f00000 0x20000>; + clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, <&dsi0_phy 0>, <&dsi0_phy 1>, @@ -84,6 +96,10 @@ examples: "dp_phy_pll_vco_div_clk", "cfg_ahb_clk", "gcc_disp_gpll0_div_clk_src"; + + required-opps = <&rpmhpd_opp_ret>; + power-domains = <&rpmpd SM6125_VDDCX>; + #clock-cells = <1>; #power-domain-cells = <1>; }; -- 2.41.0