There is no need to specify #address-cells and #size-cells in a
node that has only one non-addressable subnode, and this is the
case of the flash@0 node in this devicetree, as it has only one
"partitions" subnode.
Remove those to suppress an avoid_unnecessary_addr_size warning.
Signed-off-by: AngeloGioacchino Del Regno
<angelogioacchino.delre...@collabora.com>
---
arch/arm64/boot/dts/mediatek/mt7986a-acelink-ew-7886cax.dts | 2 --
1 file changed, 2 deletions(-)
diff --git a/arch/arm64/boot/dts/mediatek/mt7986a-acelink-ew-7886cax.dts
b/arch/arm64/boot/dts/mediatek/mt7986a-acelink-ew-7886cax.dts
index 08b3b0827436..30805a610262 100644
--- a/arch/arm64/boot/dts/mediatek/mt7986a-acelink-ew-7886cax.dts
+++ b/arch/arm64/boot/dts/mediatek/mt7986a-acelink-ew-7886cax.dts
@@ -98,8 +98,6 @@ &spi0 {
flash@0 {
compatible = "spi-nand";
reg = <0>;
- #address-cells = <1>;
- #size-cells = <1>;
spi-max-frequency = <52000000>;
spi-rx-bus-width = <4>;
spi-tx-bus-width = <4>;
--
2.50.1
