This MIPI-DSI LCD panel must be connected to something, thus add missing port property, already used in DTS. Reported by dtbs_check:
qcom/msm8916-samsung-gt58.dtb: panel@0 (samsung,lsl080al03): 'port' does not match any of the regexes: '^pinctrl-[0-9]+$' Signed-off-by: Krzysztof Kozlowski <[email protected]> --- .../devicetree/bindings/display/panel/samsung,s6d7aa0.yaml | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/Documentation/devicetree/bindings/display/panel/samsung,s6d7aa0.yaml b/Documentation/devicetree/bindings/display/panel/samsung,s6d7aa0.yaml index 939da65114bf..1f753b706911 100644 --- a/Documentation/devicetree/bindings/display/panel/samsung,s6d7aa0.yaml +++ b/Documentation/devicetree/bindings/display/panel/samsung,s6d7aa0.yaml @@ -44,6 +44,8 @@ properties: vmipi-supply: description: VMIPI supply, usually 1.8v. + port: true + required: - compatible - reg @@ -65,6 +67,12 @@ examples: power-supply = <&display_3v3_supply>; reset-gpios = <&gpf0 4 GPIO_ACTIVE_LOW>; backlight = <&backlight>; + + port { + panel_in: endpoint { + remote-endpoint = <&mdss_dsi0_out>; + }; + }; }; }; -- 2.51.0
