This MIPI-DSI LCD panel must be connected to something. According to scarce web data it supports two channels and it is already used like this in DTS. Reported by dtbs_check:
rockchip/rk3399-gru-scarlet-inx.dtb: panel@0 (innolux,p097pfg): 'ports' does not match any of the regexes: '^pinctrl-[0-9]+$' Signed-off-by: Krzysztof Kozlowski <[email protected]> --- .../bindings/display/panel/innolux,p097pfg.yaml | 26 +++++++++++++++++++++- 1 file changed, 25 insertions(+), 1 deletion(-) diff --git a/Documentation/devicetree/bindings/display/panel/innolux,p097pfg.yaml b/Documentation/devicetree/bindings/display/panel/innolux,p097pfg.yaml index 4164e3f7061d..7c75e01797f6 100644 --- a/Documentation/devicetree/bindings/display/panel/innolux,p097pfg.yaml +++ b/Documentation/devicetree/bindings/display/panel/innolux,p097pfg.yaml @@ -10,7 +10,7 @@ maintainers: - Lin Huang <[email protected]> allOf: - - $ref: panel-common.yaml# + - $ref: panel-common-dual.yaml# properties: compatible: @@ -28,6 +28,9 @@ properties: avee-supply: description: The regulator that provides negative voltage + port: true + ports: true + required: - compatible - reg @@ -52,6 +55,27 @@ examples: avee-supply = <&avee>; backlight = <&backlight>; enable-gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + mipi_in_panel: endpoint { + remote-endpoint = <&mipi_out_panel>; + }; + }; + + port@1 { + reg = <1>; + + mipi1_in_panel: endpoint { + remote-endpoint = <&mipi1_out_panel>; + }; + }; + }; }; }; -- 2.51.0
