From: Arun Iyengar <[email protected]>

In GRF_VO1_CON0 the HDMI vsync polarity bit comes before the hsync one
(bits 5 and 6 for HDMI0, 7 and 8 for HDMI1), but rk3588_get_hdmi_pol()
puts hsync first. Modes with mixed sync polarities go out with both
syncs inverted: the HDMI controller sees 1920x1080@144 +HSync -VSync
as -HSync +VSync in VIDEO_INTERFACE_STATUS0.

Fixes: 5a028e8f062f ("drm/rockchip: vop2: Add support for rk3588")
Signed-off-by: Arun Iyengar <[email protected]>
---
 drivers/gpu/drm/rockchip/rockchip_vop2_reg.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/rockchip/rockchip_vop2_reg.c 
b/drivers/gpu/drm/rockchip/rockchip_vop2_reg.c
index 3e654cb99ddf..6d08988d7007 100644
--- a/drivers/gpu/drm/rockchip/rockchip_vop2_reg.c
+++ b/drivers/gpu/drm/rockchip/rockchip_vop2_reg.c
@@ -1683,13 +1683,13 @@ static u32 rk3588_get_mipi_port_mux(int vp_id)
                return 0;
 }
 
-/* The sync polarity bits in GRF_VO1_CON0 are set for a negative sync */
+/* GRF_VO1_CON0: vsync bit below the hsync bit, each set for a negative sync */
 static u32 rk3588_get_hdmi_pol(u32 polflags)
 {
        u32 val;
 
-       val = (polflags & BIT(HSYNC_POSITIVE)) ? 0 : BIT(HSYNC_POSITIVE);
-       val |= (polflags & BIT(VSYNC_POSITIVE)) ? 0 : BIT(VSYNC_POSITIVE);
+       val = (polflags & BIT(VSYNC_POSITIVE)) ? 0 : BIT(0);
+       val |= (polflags & BIT(HSYNC_POSITIVE)) ? 0 : BIT(1);
 
        return val;
 }

-- 
2.55.0


Reply via email to