This series moves the Amlogic Meson HDMI TX PHY handling (covering GXBB,
GXL, GXM, and G12A SoCs) out of the meson_dw_hdmi DRM driver and into a
dedicated generic PHY driver.

Until now, meson_dw_hdmi directly manipulated the HHI system controller
registers (HHI_HDMI_PHY_CNTL0..5) to configure analog parameters, toggle
resets, and manage power states, as well as manually ungating HDMI
clocks and power domains already described in the DT.

By extracting this logic into a standalone PHY driver under
drivers/phy/amlogic/:
- Hardware representation in the DT is cleaner, modeling the HDMI TX PHY
  as a child node of the HHI syscon referenced via standard "phys" and
  "phy-names" properties.
- The DRM bridge driver relies on the standard generic PHY API
  (phy_init, phy_configure, phy_power_on/off, phy_exit) rather than
  touching syscon registers directly.
- Legacy DTs lacking the "phys" property remain supported via a
  temporary fallback helper (meson_hdmi_phy_create_legacy) to preserve
  backward compatibility to be removed on next phase of component
  removal.

Overview of the series:
- Patches 1-3: Fix compatible matching in meson-gx-hhi-sysctrl bindings,
  add the new amlogic,meson-hdmi-tx-phy DT schema, and allow the
  "hdmi-phy" child node under the HHI syscon.
- Patch 4: Add the new Meson HDMI TX PHY driver implementing the HDMI
  PHY configuration ops, along with the temporary legacy creation
  helper.
- Patch 5: Document the optional "phys" and "phy-names" properties in
  the amlogic,meson-dw-hdmi binding.
- Patches 6-7: Clean up manual HHI clock/power-domain writes in
  meson_dw_hdmi (relying on runtime PM instead) and convert the driver
  to use the generic PHY framework.
- Patches 8-10: Add the "hdmi-phy" child node and wire up the "phys"
  phandle for G12, GXBB, and GXL Device Trees.

Tested on:
- Khadas VIM1 (GXL)
- dtbs_check and dt_binding_check run cleanly with no new warnings.

Signed-off-by: Ronald Claveau <[email protected]>
---
Ronald Claveau (10):
      dt-bindings: soc: amlogic: meson-gx-hhi-sysctrl: Fix compatible matching 
in conditionals
      dt-bindings: phy: amlogic: Add Meson HDMI TX PHY binding
      dt-bindings: soc: amlogic: meson-gx-hhi-sysctrl: Add hdmi-phy child node
      phy: amlogic: Add Meson HDMI TX PHY driver
      dt-bindings: display: amlogic,meson-dw-hdmi: Add phys and phy-names
      drm/meson: dw-hdmi: Drop manual HHI clock and memory PD setup
      drm/meson: dw-hdmi: Use the generic PHY framework for the HDMI TX PHY
      arm64: dts: amlogic: Add HDMI TX PHY node for G12
      arm64: dts: amlogic: Add HDMI TX PHY node for GXBB
      arm64: dts: amlogic: Add HDMI TX PHY node for GXL

 .../bindings/display/amlogic,meson-dw-hdmi.yaml    |   8 +
 .../bindings/phy/amlogic,meson-hdmi-tx-phy.yaml    |  33 +++
 .../soc/amlogic/amlogic,meson-gx-hhi-sysctrl.yaml  |  43 ++-
 arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi  |   7 +
 arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi        |   7 +
 arch/arm64/boot/dts/amlogic/meson-gxl.dtsi         |   7 +
 drivers/gpu/drm/meson/Kconfig                      |   1 +
 drivers/gpu/drm/meson/meson_dw_hdmi.c              | 203 ++++++--------
 drivers/phy/amlogic/Kconfig                        |  11 +
 drivers/phy/amlogic/Makefile                       |   1 +
 drivers/phy/amlogic/phy-meson-hdmi-tx.c            | 309 +++++++++++++++++++++
 include/linux/phy/phy-meson-hdmi-tx.h              |  19 ++
 12 files changed, 513 insertions(+), 136 deletions(-)
---
base-commit: 6d582d78fad9d828e575ca0cdcff8ea47a77220b
change-id: 20261115-meson-drm-create-hdmitx-phy-4ac40a654d09

Best regards,
--  
Ronald Claveau <[email protected]>


Reply via email to