Thank you for your contribution! Sashiko AI review found 2 potential
issues to consider:
- [High] drm/msm/dpu: KMS init failure on SC8180X in
  _dpu_kms_initialize_displayport()
- [Medium] drm/msm/dp: devres leak of msm_dp_panel in
  msm_dp_mst_attach_encoder()
--

commit b76c85c1a18e10745adde0bb5001dc9b1e93e31a
Author: Yongxing Mou <[email protected]>

drm/msm/dpu: add per-stream MST encoders

This commit creates a DRM encoder for each DP MST stream, associates it
with a stream ID and panel, and sets up MST-specific encoder helper
callbacks.

> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c 
> b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
> index 3c3203ca32c76..92691d39dcb24 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
> @@ -688,6 +688,21 @@ static int _dpu_kms_initialize_displayport(struct 
> drm_device *dev,
>                               return rc;
>                       }
>               }
> +
> +             for (int stream_id = 0; stream_cnt > 1 && stream_id < 
> stream_cnt; stream_id++) {
> +                     info.stream_id = stream_id;
> +                     encoder = dpu_encoder_init(dev, DRM_MODE_ENCODER_DPMST, 
> &info);
> +                     if (IS_ERR(encoder)) {
> +                             DPU_ERROR("encoder init failed for dp mst 
> display\n");
> +                             return PTR_ERR(encoder);
> +                     }

[Severity: High]
Does this break KMS initialization on SC8180X?

In arch/arm64/boot/dts/qcom/sc8180x.dtsi, mdss_dp0 and mdss_dp1 both
specify stream_pixel and stream_1_pixel in clock-names, so
msm_dp_get_mst_max_stream() returns stream_cnt == 2.  However, the SC8180X
DPU catalog only has one INTF_DP entry per controller because the shared
MST interface uses a dummy controller_id:

drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_5_1_sc8180x.h:sc8180x_intf[] {
    ...
        /* INTF_3 is for MST, wired to INTF_DP 0 and 1, use dummy index until 
this is supported */
        {
                .name = "intf_3", .id = INTF_3,
                .base = 0x6b800, .len = 0x280,
                .type = INTF_DP,
                .controller_id = 999,
    ...
}

When stream_id == 1, dpu_encoder_init() -> dpu_encoder_setup_display() ->
dpu_encoder_get_intf() finds no second matching INTF_DP entry and returns
NULL, causing _dpu_kms_initialize_displayport() to fail with -ENOMEM and
aborting display initialization on SC8180X.

> diff --git a/drivers/gpu/drm/msm/dp/dp_mst_drm.c 
> b/drivers/gpu/drm/msm/dp/dp_mst_drm.c
> index a2900ff3b0ab3..ef5fb70863b81 100644
> --- a/drivers/gpu/drm/msm/dp/dp_mst_drm.c
> +++ b/drivers/gpu/drm/msm/dp/dp_mst_drm.c
> @@ -147,6 +147,26 @@ static int msm_dp_mst_encoder_stream_id(struct 
> msm_dp_mst *mst,
>       return -1;
>  }
>  
> +int msm_dp_mst_attach_encoder(struct msm_dp *dp_display, unsigned int 
> stream_id,
> +                           struct drm_encoder *encoder)
> +{
> +     struct msm_dp_mst *mst = dp_display->msm_dp_mst;
> +     struct msm_dp_panel *dp_panel;
> +
> +     dp_panel = msm_dp_display_get_panel(dp_display, stream_id);
> +     if (!dp_panel) {
> +             drm_err(dp_display->drm_dev,
> +                     "[MST] failed to allocate panel for stream %d\n", 
> stream_id);
> +             return -ENOMEM;
> +     }

[Severity: Medium]
Does calling msm_dp_display_get_panel() during KMS initialization leak
struct msm_dp_panel_private across DRM component master bind/unbind
cycles?

msm_dp_display_get_panel() calls msm_dp_panel_get(), which allocates the
panel with devm_kzalloc() on the subordinate DP platform device
(&dp->msm_dp_display.pdev->dev).  When the DRM master unbinds (or if a
later step in msm_drm_init() fails), msm_dp_mst_unregister() frees struct
msm_dp_mst, but the devres allocations on the persistent DP platform
device remain and are reallocated on each subsequent bind.

-- 
Sashiko AI review ยท 
https://sashiko.dev/#/patchset/[email protected]?part=16

Reply via email to