Hi Andreas,
On Thu, 19 Nov 2026 at 22:50, Andreas Kemnade <[email protected]> wrote:
> On Thu, 19 Nov 2026 14:40:38 +0100
> Geert Uytterhoeven <[email protected]> wrote:
>
> > OMAP2+ clock handling uses of_clk_get_from_provider() to obtain clocks
> > used for power management, so the latter show up as "deviceless" in the
> > consumer column of the clk_summary file in debugfs.
> >
> > Fix this by using dev_clk_get_from_provider() instead, letting us pass
> > the consumer device, too.
> >
> > Signed-off-by: Geert Uytterhoeven <[email protected]>
> > ---
> > Compile-tested only.
> >
> > The first change is probably OK. The second change may fail if anything
> > in the oh->od->pdev->dev chain is not available yet at this point.
>
> Test on OMAP3:
Thanks for testing!
> --- clk-old 2026-11-19 22:44:59.810807920 +0100
> +++ clk-new 2026-11-19 22:26:52.862531880 +0100
> @@ -1,17 +1,17 @@
> enable prepare protect
> duty hardware connection
> clock count count count rate
> accuracy phase cycle enable consumer id
>
> ---------------------------------------------------------------------------------------------------------------------------------------------
> - oscillator 0 0 0 26000000 0
> 0 50000 Y deviceless
> of_clk_get_from_provider
> + oscillator 0 0 0 26000000 0
> 0 50000 Y deviceless
> dev_clk_get_from_provider
>
> deviceless no_connection_id
> - secure_32k_fck 0 1 0 32768 0
> 0 50000 Y deviceless
> of_clk_get_from_provider
> + secure_32k_fck 0 1 0 32768 0
> 0 50000 Y deviceless
> dev_clk_get_from_provider
>
> deviceless no_connection_id
> - wdt1_fck 0 0 0 32768 0
> 0 50000 Y deviceless
> of_clk_get_from_provider
> + wdt1_fck 0 0 0 32768 0
> 0 50000 Y deviceless
> dev_clk_get_from_provider
>
> deviceless
> no_connection_id
> gpt12_fck 0 1 0 32768 0
> 0 50000 Y 48304000.timer fck
>
> 48304000.target-module fck
> -
> deviceless
> of_clk_get_from_provider
> +
> deviceless
> dev_clk_get_from_provider
>
> deviceless
> no_connection_id
> - dummy_ck 0 0 0 0 0
> 0 50000 Y deviceless
> of_clk_get_from_provider
> + dummy_ck 0 0 0 0 0
> 0 50000 Y deviceless
> dev_clk_get_from_provider
>
> deviceless no_connection_id
> mcbsp_clks 0 5 0 0 0
> 0 50000 Y deviceless mcbsp_clks
>
> deviceless mcbsp_clks
Hmm, so the passed device is always NULL, and thus there is no point
in making the change.
Do you know if these come from the first or second change in my patch
(I guess the second)?
Thanks again!
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- [email protected]
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds