Signed-off-by: mark yao <yzq at rock-chips.com>
---
 .../devicetree/bindings/video/rockchip-panel.txt   |   34 ++++++++++++++++++++
 1 file changed, 34 insertions(+)

diff --git a/Documentation/devicetree/bindings/video/rockchip-panel.txt 
b/Documentation/devicetree/bindings/video/rockchip-panel.txt
index f599806..f6d80f6 100644
--- a/Documentation/devicetree/bindings/video/rockchip-panel.txt
+++ b/Documentation/devicetree/bindings/video/rockchip-panel.txt
@@ -80,3 +80,37 @@ Example:
                rockchip,data-width = <24>;
                rockchip,panel = <&panel>;
        };
+
+Rockchip RK3288 EDP interface
+================================
+Required properties:
+-compatible: "rockchip,rk3288-edp";
+
+- reg: physical base address of the controller and length
+- clocks: from common clock binding: handle to dp clock.
+       of memory mapped region.
+- clock-names: from common clock binding:
+       Required elements: "clk_edp"
+                       "clk_edp_24m"
+                       "clk_edp_24m_parent"
+                       "pclk_edp"
+- rockchip,grf: this soc should set GRF regs, so need get grf here.
+- resets: Must contain an entry for each entry in reset-names.
+       See ../reset/reset.txt for details.
+- reset-names: Must include the following entries:
+  - edp
+- rockchip,panel: required a panel node
+
+Example:
+       edp: edp at ff970000 {
+               compatible = "rockchip,rk3288-edp";
+                reg = <0xff970000 0x4000>;
+                interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+                clocks = <&cru SCLK_EDP>, <&cru SCLK_EDP_24M>, <&cru 
PCLK_EDP_CTRL>, <&xin24m>;
+                clock-names = "clk_edp", "clk_edp_24m", "pclk_edp", 
"clk_edp_24m_parent";
+
+                rockchip,grf = <&grf>;
+                resets = <&cru 111>;
+                reset-names = "edp";
+               rockchip,panel = <&panel>;
+       };
-- 
1.7.9.5


Reply via email to