Signed-off-by: mark yao <yzq at rock-chips.com> --- drivers/gpu/drm/rockchip/connector/Kconfig | 9 + drivers/gpu/drm/rockchip/connector/Makefile | 1 + .../gpu/drm/rockchip/connector/rk3288_dp_core.c | 586 ++++++++++ .../gpu/drm/rockchip/connector/rk3288_dp_core.h | 355 ++++++ drivers/gpu/drm/rockchip/connector/rk3288_dp_reg.c | 1192 ++++++++++++++++++++ drivers/gpu/drm/rockchip/connector/rk3288_dp_reg.h | 378 +++++++ drivers/gpu/drm/rockchip/rockchip_drm_drv.c | 13 + drivers/gpu/drm/rockchip/rockchip_drm_drv.h | 3 + 8 files changed, 2537 insertions(+) create mode 100644 drivers/gpu/drm/rockchip/connector/rk3288_dp_core.c create mode 100644 drivers/gpu/drm/rockchip/connector/rk3288_dp_core.h create mode 100644 drivers/gpu/drm/rockchip/connector/rk3288_dp_reg.c create mode 100644 drivers/gpu/drm/rockchip/connector/rk3288_dp_reg.h
diff --git a/drivers/gpu/drm/rockchip/connector/Kconfig b/drivers/gpu/drm/rockchip/connector/Kconfig index 248942f..caffc5b 100644 --- a/drivers/gpu/drm/rockchip/connector/Kconfig +++ b/drivers/gpu/drm/rockchip/connector/Kconfig @@ -6,3 +6,12 @@ config RK3288_LVDS rk3288 lvds transmitter support ttl rgb, lvds and dual lvds mode, dual lvds mode is support for the plane which need dual lvds channels. + +config RK3288_DP + bool "RK3288 edp connector support" + depends on DRM_ROCKCHIP_CONNECTOR + help + Choose this option if you have a rk32xx eDP connector. + Rockchip rk3288 SoC has eDP TX Controller can be used. + If you have an Embedded DisplayPort Panel, say Y to enable its + driver. diff --git a/drivers/gpu/drm/rockchip/connector/Makefile b/drivers/gpu/drm/rockchip/connector/Makefile index dcfbdef..4be77ea 100644 --- a/drivers/gpu/drm/rockchip/connector/Makefile +++ b/drivers/gpu/drm/rockchip/connector/Makefile @@ -2,3 +2,4 @@ # Makefile for display connector like lvds edp mipi # obj-$(CONFIG_RK3288_LVDS) += rk3288_lvds.o +obj-$(CONFIG_RK3288_DP) += rk3288_dp_core.o rk3288_dp_reg.o diff --git a/drivers/gpu/drm/rockchip/connector/rk3288_dp_core.c b/drivers/gpu/drm/rockchip/connector/rk3288_dp_core.c new file mode 100644 index 0000000..3756383 --- /dev/null +++ b/drivers/gpu/drm/rockchip/connector/rk3288_dp_core.c @@ -0,0 +1,586 @@ +/* +* Copyright (C) Fuzhou Rockchip Electronics Co.Ltd +* Author: +* yxj <yxj at rock-chips.com> +* cym <cym at rock-chips.com> +* +* based on exynos_dp_core.c +* +* This program is free software; you can redistribute it and/or modify it +* under the terms of the GNU General Public License as published by the +* Free Software Foundation; either version 2 of the License, or (at your +* option) any later version. +*/ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/errno.h> +#include <linux/string.h> +#include <linux/slab.h> +#include <linux/delay.h> +#include <linux/interrupt.h> +#include <linux/clk.h> +#include <linux/platform_device.h> +#include <linux/uaccess.h> +#include <linux/mfd/syscon.h> +#include <linux/regmap.h> +#include <linux/reset.h> +#include <linux/of.h> + +#include "rk3288_dp_core.h" + +static int rk3288_edp_clk_enable(struct rk3288_edp *edp) +{ + int ret = 0; + + if (!edp->clk_on) { + ret = clk_prepare_enable(edp->pclk); + if (ret < 0) { + dev_err(edp->dev, "cannot enable edp pclk %d\n", ret); + goto err_pclk; + } + + ret = clk_prepare_enable(edp->clk_edp); + if (ret < 0) { + dev_err(edp->dev, "cannot enable clk_edp %d\n", ret); + goto err_clk_edp; + } + + ret = clk_set_parent(edp->clk_24m, edp->clk_24m_parent); + if (ret < 0) { + dev_err(edp->dev, "cannot set edp clk_24m parent %d\n", + ret); + goto err_clk_24m; + } + + ret = clk_prepare_enable(edp->clk_24m); + if (ret < 0) { + dev_err(edp->dev, "cannot enable edp clk_24m %d\n", + ret); + goto err_clk_24m; + } + + edp->clk_on = true; + } + + return 0; + +err_clk_24m: + clk_disable_unprepare(edp->clk_edp); +err_clk_edp: + clk_disable_unprepare(edp->pclk); +err_pclk: + edp->clk_on = false; + + return ret; +} + +static int rk3288_edp_clk_disable(struct rk3288_edp *edp) +{ + if (edp->clk_on) { + clk_disable_unprepare(edp->pclk); + clk_disable_unprepare(edp->clk_edp); + clk_disable_unprepare(edp->clk_24m); + edp->clk_on = false; + } + + return 0; +} + +static int rk3288_edp_pre_init(struct rk3288_edp *edp) +{ + u32 val; + int ret = 0; + + val = GRF_EDP_REF_CLK_SEL_INTER | (GRF_EDP_REF_CLK_SEL_INTER << 16); + ret = regmap_write(edp->grf, edp->soc_data->grf_soc_con12, val); + if (ret != 0) { + dev_err(edp->dev, "Could not write to GRF: %d\n", ret); + return ret; + } + + reset_control_assert(edp->rst); + usleep_range(10, 20); + reset_control_deassert(edp->rst); + + return 0; +} + +static int rk3288_edp_init_edp(struct rk3288_edp *edp) +{ + int lcdc_id = 1; + u32 val = 0; + int ret = 0; + + /* select lcdc */ + if (lcdc_id == 1) + val = EDP_SEL_VOP_LIT | (EDP_SEL_VOP_LIT << 16); + else + val = EDP_SEL_VOP_LIT << 16; + ret = regmap_write(edp->grf, edp->soc_data->grf_soc_con6, val); + if (ret != 0) { + dev_err(edp->dev, "Could not write to GRF: %d\n", ret); + return ret; + } + + rk3288_edp_reset(edp); + rk3288_edp_init_refclk(edp); + rk3288_edp_init_interrupt(edp); + rk3288_edp_enable_sw_function(edp); + rk3288_edp_init_analog_func(edp); + rk3288_edp_init_hpd(edp); + rk3288_edp_init_aux(edp); + + return 0; +} + +static int rk3288_edp_get_max_rx_bandwidth( + struct rk3288_edp *edp, + u8 *bandwidth) +{ + u8 data; + int retval = 0; + + /* + * For DP rev.1.1, Maximum link rate of Main Link lanes + * 0x06 = 1.62 Gbps, 0x0a = 2.7 Gbps + */ + retval = rk3288_edp_read_byte_from_dpcd( + edp, DPCD_ADDR_MAX_LINK_RATE, &data); + if (retval < 0) + *bandwidth = 0; + else + *bandwidth = data; + + return retval; +} + +static int rk3288_edp_get_max_rx_lane_count(struct rk3288_edp *edp, + u8 *lane_count) +{ + u8 data; + int retval; + + /* + * For DP rev.1.1, Maximum number of Main Link lanes + * 0x01 = 1 lane, 0x02 = 2 lanes, 0x04 = 4 lanes + */ + retval = rk3288_edp_read_byte_from_dpcd( + edp, DPCD_ADDR_MAX_LANE_COUNT, &data); + if (retval < 0) + *lane_count = 0; + else + *lane_count = DPCD_MAX_LANE_COUNT(data); + + return retval; +} + +static int rk3288_edp_init_training(struct rk3288_edp *edp) +{ + int retval; + + /* + * MACRO_RST must be applied after the PLL_LOCK to avoid + * the DP inter pair skew issue for at least 10 us + */ + rk3288_edp_reset_macro(edp); + + retval = rk3288_edp_get_max_rx_bandwidth( + edp, &edp->link_train.link_rate); + retval = rk3288_edp_get_max_rx_lane_count( + edp, &edp->link_train.lane_count); + dev_dbg(edp->dev, "max link rate:%d.%dGps max number of lanes:%d\n", + edp->link_train.link_rate * 27/100, + edp->link_train.link_rate*27%100, + edp->link_train.lane_count); + + if ((edp->link_train.link_rate != LINK_RATE_1_62GBPS) && + (edp->link_train.link_rate != LINK_RATE_2_70GBPS)) { + dev_warn(edp->dev, "Rx Max Link Rate is abnormal :%x !\n" + "use default link rate:%d.%dGps\n", + edp->link_train.link_rate, + edp->video_info.link_rate*27/100, + edp->video_info.link_rate*27%100); + edp->link_train.link_rate = edp->video_info.link_rate; + } + + if (edp->link_train.lane_count == 0) { + dev_err(edp->dev, "Rx Max Lane count is abnormal :%x !\n" + "use default lanes:%d\n", + edp->link_train.lane_count, + edp->video_info.lane_count); + edp->link_train.lane_count = edp->video_info.lane_count; + } + + rk3288_edp_analog_power_ctr(edp, 1); + + return 0; +} + +static int rk3288_edp_hw_link_training(struct rk3288_edp *edp) +{ + u32 cnt = 50; + u32 val; + + /* Set link rate and count as you want to establish*/ + rk3288_edp_set_link_bandwidth(edp, edp->link_train.link_rate); + rk3288_edp_set_lane_count(edp, edp->link_train.lane_count); + rk3288_edp_hw_link_training_en(edp); + val = rk3288_edp_wait_hw_lt_done(edp); + while (val) { + if (cnt-- <= 0) { + dev_err(edp->dev, "hw lt timeout"); + return -ETIMEDOUT; + } + mdelay(1); + val = rk3288_edp_wait_hw_lt_done(edp); + } + + val = rk3288_edp_get_hw_lt_status(edp); + if (val) + dev_err(edp->dev, "hw lt err:%d\n", val); + + return val; +} + +static int rk3288_edp_set_link_train(struct rk3288_edp *edp) +{ + int retval; + + rk3288_edp_init_training(edp); + + retval = rk3288_edp_hw_link_training(edp); + if (retval < 0) + dev_err(edp->dev, "DP hw LT failed!\n"); + + return retval; +} + +static int rk3288_edp_config_video(struct rk3288_edp *edp, + struct video_info *video_info) +{ + int retval = 0; + int timeout_loop = 0; + int done_count = 0; + + rk3288_edp_config_video_slave_mode(edp, video_info); + + rk3288_edp_set_video_color_format(edp, video_info->color_depth, + video_info->color_space, + video_info->dynamic_range, + video_info->ycbcr_coeff); + + if (rk3288_edp_get_pll_lock_status(edp) == DP_PLL_UNLOCKED) { + dev_err(edp->dev, "PLL is not locked yet.\n"); + return -EINVAL; + } + + for (;;) { + timeout_loop++; + if (rk3288_edp_is_slave_video_stream_clock_on(edp) == 0) + break; + + if (DP_TIMEOUT_LOOP_CNT < timeout_loop) { + dev_err(edp->dev, "Timeout of video streamclk ok\n"); + return -ETIMEDOUT; + } + + udelay(1); + } + + /* Set to use the register calculated M/N video */ + rk3288_edp_set_video_cr_mn(edp, CALCULATED_M, 0, 0); + + /* Disable video mute */ + rk3288_edp_enable_video_mute(edp, 0); + + /* Configure video slave mode */ + rk3288_edp_enable_video_master(edp, 0); + + /* Enable video */ + rk3288_edp_start_video(edp); + + timeout_loop = 0; + + for (;;) { + timeout_loop++; + if (rk3288_edp_is_video_stream_on(edp) == 0) { + done_count++; + if (done_count > 10) + break; + } else if (done_count) { + done_count = 0; + } + if (DP_TIMEOUT_LOOP_CNT < timeout_loop) { + dev_err(edp->dev, "Timeout of video streamclk ok\n"); + return -ETIMEDOUT; + } + + mdelay(1); + } + + if (retval != 0) + dev_err(edp->dev, "Video stream is not detected!\n"); + + return retval; +} + +static irqreturn_t rk3288_edp_isr(int irq, void *arg) +{ + struct rk3288_edp *edp = arg; + enum dp_irq_type irq_type; + + irq_type = rk3288_edp_get_irq_type(edp); + switch (irq_type) { + case DP_IRQ_TYPE_HP_CABLE_IN: + dev_dbg(edp->dev, "Received irq - cable in\n"); + rk3288_edp_clear_hotplug_interrupts(edp); + break; + case DP_IRQ_TYPE_HP_CABLE_OUT: + dev_dbg(edp->dev, "Received irq - cable out\n"); + rk3288_edp_clear_hotplug_interrupts(edp); + break; + case DP_IRQ_TYPE_HP_CHANGE: + /* + * We get these change notifications once in a while, but there + * is nothing we can do with them. Just ignore it for now and + * only handle cable changes. + */ + dev_dbg(edp->dev, "Received irq - hotplug change; ignoring.\n"); + rk3288_edp_clear_hotplug_interrupts(edp); + break; + default: + dev_err(edp->dev, "Received irq - unknown type[%x]!\n", + irq_type); + rk3288_edp_clear_hotplug_interrupts(edp); + break; + } + + return IRQ_HANDLED; +} + +static void rk3288_edp_enable(struct rockchip_connector *conn) +{ + struct rk3288_edp *edp = conn->priv; + int ret = 0; + + ret = rk3288_edp_clk_enable(edp); + if (ret < 0) { + dev_err(edp->dev, "cannot enable edp clk %d\n", ret); + return; + } + + ret = rk3288_edp_pre_init(edp); + if (ret < 0) { + dev_err(edp->dev, "edp pre init fail %d\n", ret); + return; + } + + ret = rk3288_edp_init_edp(edp); + if (ret < 0) { + dev_err(edp->dev, "edp init fail %d\n", ret); + return; + } + + enable_irq(edp->irq); + + ret = rk3288_edp_set_link_train(edp); + if (ret) + dev_err(edp->dev, "link train failed!\n"); + else + dev_dbg(edp->dev, "link training success.\n"); + + rk3288_edp_set_lane_count(edp, edp->link_train.lane_count); + rk3288_edp_set_link_bandwidth(edp, edp->link_train.link_rate); + rk3288_edp_init_video(edp); + + ret = rk3288_edp_config_video(edp, &edp->video_info); + if (ret) + dev_err(edp->dev, "unable to config video\n"); +} + +static void rk3288_edp_disable(struct rockchip_connector *conn) +{ + struct rk3288_edp *edp = conn->priv; + + disable_irq(edp->irq); + rk3288_edp_reset(edp); + rk3288_edp_analog_power_ctr(edp, 0); + rk3288_edp_clk_disable(edp); +} + +static int rk3288_edp_setmode(struct rockchip_connector *conn, + struct drm_display_mode *mode) +{ + struct rk3288_edp *edp = conn->priv; + + memcpy(&edp->mode, mode, sizeof(*mode)); + + return 0; +} + +static struct rockchip_connector edp_conn = { + .enable = rk3288_edp_enable, + .disable = rk3288_edp_disable, + .setmode = rk3288_edp_setmode, +}; + +static struct rk3288_edp_soc_data soc_data[2] = { + {.grf_soc_con6 = 0x025c, + .grf_soc_con12 = 0x0274}, + {.grf_soc_con6 = -1, + .grf_soc_con12 = -1}, +}; + +static const struct of_device_id rk3288_edp_dt_ids[] = { + {.compatible = "rockchip,rk3288-edp", + .data = (void *)&soc_data[0]}, + {} +}; +MODULE_DEVICE_TABLE(of, rk3288_edp_dt_ids); + +static int rk3288_edp_probe(struct platform_device *pdev) +{ + struct rk3288_edp *edp; + struct resource *res; + struct device_node *np = pdev->dev.of_node; + const struct of_device_id *match; + int ret = 0; + + if (!np) { + dev_err(&pdev->dev, "Missing device tree node.\n"); + return -EINVAL; + } + + edp = devm_kzalloc(&pdev->dev, sizeof(struct rk3288_edp), GFP_KERNEL); + if (!edp) { + dev_err(&pdev->dev, "no memory for state\n"); + return -ENOMEM; + } + + match = of_match_node(rk3288_edp_dt_ids, np); + edp->soc_data = (struct rk3288_edp_soc_data *)match->data; + /* + * The control bit is located in the GRF register space. + */ + if (edp->soc_data->grf_soc_con6 >= 0) { + edp->grf = syscon_regmap_lookup_by_phandle(np, "rockchip,grf"); + if (IS_ERR(edp->grf)) { + dev_err(&pdev->dev, + "rk3288-edp needs rockchip,grf property\n"); + return PTR_ERR(edp->grf); + } + } + + edp->dev = &pdev->dev; + edp->video_info.h_sync_polarity = 0; + edp->video_info.v_sync_polarity = 0; + edp->video_info.interlaced = 0; + edp->video_info.color_space = CS_RGB; + edp->video_info.dynamic_range = VESA; + edp->video_info.ycbcr_coeff = COLOR_YCBCR601; + edp->video_info.color_depth = COLOR_8; + + edp->video_info.link_rate = LINK_RATE_1_62GBPS; + edp->video_info.lane_count = LANE_CNT4; + edp_conn.type = ROCKCHIP_DISPLAY_TYPE_EDP; + edp_conn.priv = edp; + edp_conn.dev = &pdev->dev; + + edp->base = rockchip_connector_register(&edp_conn); + if (!edp->base) { + dev_err(&pdev->dev, "connector register fail\n"); + return -EINVAL; + } + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + edp->regs = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(edp->regs)) { + dev_err(&pdev->dev, "ioremap reg failed\n"); + return PTR_ERR(edp->regs); + } + + edp->clk_edp = devm_clk_get(&pdev->dev, "clk_edp"); + if (IS_ERR(edp->clk_edp)) { + dev_err(&pdev->dev, "cannot get clk_edp\n"); + return PTR_ERR(edp->clk_edp); + } + + edp->clk_24m_parent = devm_clk_get(&pdev->dev, "clk_edp_24m_parent"); + if (IS_ERR(edp->clk_24m_parent)) { + dev_err(&pdev->dev, "cannot get clk_edp_24m_parent\n"); + return PTR_ERR(edp->clk_24m_parent); + } + + edp->clk_24m = devm_clk_get(&pdev->dev, "clk_edp_24m"); + if (IS_ERR(edp->clk_24m)) { + dev_err(&pdev->dev, "cannot get clk_edp_24m\n"); + return PTR_ERR(edp->clk_24m); + } + + edp->pclk = devm_clk_get(&pdev->dev, "pclk_edp"); + if (IS_ERR(edp->pclk)) { + dev_err(&pdev->dev, "cannot get pclk\n"); + return PTR_ERR(edp->pclk); + } + + edp->rst = devm_reset_control_get(&pdev->dev, "edp"); + if (IS_ERR(edp->rst)) { + dev_err(&pdev->dev, "failed to get reset\n"); + return PTR_ERR(edp->rst); + } + + ret = rk3288_edp_clk_enable(edp); + if (ret < 0) { + dev_err(edp->dev, "cannot enable edp clk %d\n", ret); + return ret; + } + + ret = rk3288_edp_pre_init(edp); + if (ret < 0) { + dev_err(edp->dev, "failed to pre init %d\n", ret); + return ret; + } + + edp->irq = platform_get_irq(pdev, 0); + if (edp->irq < 0) { + dev_err(&pdev->dev, "cannot find IRQ\n"); + return edp->irq; + } + + ret = devm_request_irq(&pdev->dev, edp->irq, rk3288_edp_isr, 0, + dev_name(&pdev->dev), edp); + if (ret) { + dev_err(&pdev->dev, "cannot claim IRQ %d\n", edp->irq); + return ret; + } + + disable_irq_nosync(edp->irq); + + edp->standby = true; + + platform_set_drvdata(pdev, edp); + dev_set_name(edp->dev, "rk3288-edp"); + + dev_info(&pdev->dev, "rk3288 edp driver probe success\n"); + + return 0; +} + +static int rk3288_edp_remove(struct platform_device *pdev) +{ + rk3288_edp_disable(&edp_conn); + + return 0; +} + +struct platform_driver rk3288_edp_driver = { + .probe = rk3288_edp_probe, + .remove = rk3288_edp_remove, + .driver = { + .name = "rk3288-edp", + .owner = THIS_MODULE, + .of_match_table = of_match_ptr(rk3288_edp_dt_ids), + }, +}; diff --git a/drivers/gpu/drm/rockchip/connector/rk3288_dp_core.h b/drivers/gpu/drm/rockchip/connector/rk3288_dp_core.h new file mode 100644 index 0000000..d71df70 --- /dev/null +++ b/drivers/gpu/drm/rockchip/connector/rk3288_dp_core.h @@ -0,0 +1,355 @@ +/* +* Copyright (C) Fuzhou Rockchip Electronics Co.Ltd +* Author: +* yxj <yxj at rock-chips.com> +* cym <cym at rock-chips.com> +* +* based on exynos_dp_core.h +* +* This program is free software; you can redistribute it and/or modify it +* under the terms of the GNU General Public License as published by the +* Free Software Foundation; either version 2 of the License, or (at your +* option) any later version. +*/ + +#ifndef __RK3288_DP_H +#define __RK3288_DP_H +#include "../rockchip_drm_connector.h" + +#define DP_TIMEOUT_LOOP_CNT 100 +#define MAX_CR_LOOP 5 +#define MAX_EQ_LOOP 5 + +#define GRF_EDP_REF_CLK_SEL_INTER (1 << 4) +#define GRF_EDP_HDCP_EN (1 << 15) +#define GRF_EDP_BIST_EN (1 << 14) +#define GRF_EDP_MEM_CTL_BY_EDP (1 << 13) +#define GRF_EDP_SECURE_EN (1 << 3) +#define EDP_SEL_VOP_LIT (1 << 5) + +enum dp_irq_type { + DP_IRQ_TYPE_HP_CABLE_IN, + DP_IRQ_TYPE_HP_CABLE_OUT, + DP_IRQ_TYPE_HP_CHANGE, + DP_IRQ_TYPE_UNKNOWN, +}; + +enum color_coefficient { + COLOR_YCBCR601, + COLOR_YCBCR709 +}; + +enum dynamic_range { + VESA, + CEA +}; + +enum pll_status { + DP_PLL_UNLOCKED, + DP_PLL_LOCKED +}; + +enum clock_recovery_m_value_type { + CALCULATED_M, + REGISTER_M +}; + +enum video_timing_recognition_type { + VIDEO_TIMING_FROM_CAPTURE, + VIDEO_TIMING_FROM_REGISTER +}; + +enum pattern_set { + PRBS7, + D10_2, + TRAINING_PTN1, + TRAINING_PTN2, + DP_NONE +}; + +enum color_space { + CS_RGB, + CS_YCBCR422, + CS_YCBCR444 +}; + +enum color_depth { + COLOR_6, + COLOR_8, + COLOR_10, + COLOR_12 +}; + +enum link_rate_type { + LINK_RATE_1_62GBPS = 0x06, + LINK_RATE_2_70GBPS = 0x0a +}; + +enum link_lane_count_type { + LANE_CNT1 = 1, + LANE_CNT2 = 2, + LANE_CNT4 = 4 +}; + +enum link_training_state { + LT_START, + LT_CLK_RECOVERY, + LT_EQ_TRAINING, + FINISHED, + FAILED +}; + +enum voltage_swing_level { + VOLTAGE_LEVEL_0, + VOLTAGE_LEVEL_1, + VOLTAGE_LEVEL_2, + VOLTAGE_LEVEL_3, +}; + +enum pre_emphasis_level { + PRE_EMPHASIS_LEVEL_0, + PRE_EMPHASIS_LEVEL_1, + PRE_EMPHASIS_LEVEL_2, + PRE_EMPHASIS_LEVEL_3, +}; + +enum analog_power_block { + AUX_BLOCK, + CH0_BLOCK, + CH1_BLOCK, + CH2_BLOCK, + CH3_BLOCK, + ANALOG_TOTAL, + POWER_ALL +}; + +struct video_info { + char *name; + + bool h_sync_polarity; + bool v_sync_polarity; + bool interlaced; + + enum color_space color_space; + enum dynamic_range dynamic_range; + enum color_coefficient ycbcr_coeff; + enum color_depth color_depth; + + enum link_rate_type link_rate; + enum link_lane_count_type lane_count; +}; + +struct link_train { + int eq_loop; + int cr_loop[4]; + + u8 link_rate; + u8 lane_count; + u8 training_lane[4]; + + enum link_training_state lt_state; +}; + +/* + * @grf_offset: offset inside the grf regmap for setting the rk3288 lvds + */ +struct rk3288_edp_soc_data { + int grf_soc_con6; + int grf_soc_con12; +}; + +struct rk3288_edp { + void *base; + struct drm_display_mode mode; + struct device *dev; + void __iomem *regs; + struct regmap *grf; + struct rk3288_edp_soc_data *soc_data; + unsigned int irq; + /* clk for edp controller */ + struct clk *clk_edp; + /* clk for edp phy parent */ + struct clk *clk_24m_parent; + /* clk for edp phy */ + struct clk *clk_24m; + /* clk for phb bus */ + struct clk *pclk; + struct reset_control *rst; + struct link_train link_train; + struct video_info video_info; + bool clk_on; + bool standby; +}; + +void rk3288_edp_enable_video_mute(struct rk3288_edp *edp, bool enable); +void rk3288_edp_stop_video(struct rk3288_edp *edp); +void rk3288_edp_lane_swap(struct rk3288_edp *edp, bool enable); +void rk3288_edp_init_refclk(struct rk3288_edp *edp); +void rk3288_edp_init_interrupt(struct rk3288_edp *edp); +void rk3288_edp_reset(struct rk3288_edp *edp); +void rk3288_edp_config_interrupt(struct rk3288_edp *edp); +u32 rk3288_edp_get_pll_lock_status(struct rk3288_edp *edp); +void rk3288_edp_analog_power_ctr(struct rk3288_edp *edp, bool enable); +void rk3288_edp_init_analog_func(struct rk3288_edp *edp); +void rk3288_edp_init_hpd(struct rk3288_edp *edp); +void rk3288_edp_reset_aux(struct rk3288_edp *edp); +void rk3288_edp_init_aux(struct rk3288_edp *edp); +int rk3288_edp_get_plug_in_status(struct rk3288_edp *edp); +void rk3288_edp_enable_sw_function(struct rk3288_edp *edp); +int rk3288_edp_start_aux_transaction(struct rk3288_edp *edp); +int rk3288_edp_write_byte_to_dpcd(struct rk3288_edp *edp, + unsigned int reg_addr, + unsigned char data); +int rk3288_edp_read_byte_from_dpcd(struct rk3288_edp *edp, + unsigned int reg_addr, + unsigned char *data); +int rk3288_edp_write_bytes_to_dpcd(struct rk3288_edp *edp, + unsigned int reg_addr, + unsigned int count, + unsigned char data[]); +int rk3288_edp_read_bytes_from_dpcd(struct rk3288_edp *edp, + unsigned int reg_addr, + unsigned int count, + unsigned char data[]); +int rk3288_edp_select_i2c_device(struct rk3288_edp *edp, + unsigned int device_addr, + unsigned int reg_addr); +int rk3288_edp_read_byte_from_i2c(struct rk3288_edp *edp, + unsigned int device_addr, + unsigned int reg_addr, + unsigned int *data); +int rk3288_edp_read_bytes_from_i2c(struct rk3288_edp *edp, + unsigned int device_addr, + unsigned int reg_addr, + unsigned int count, + unsigned char edid[]); +void rk3288_edp_set_link_bandwidth(struct rk3288_edp *edp, u32 bwtype); +void rk3288_edp_get_link_bandwidth(struct rk3288_edp *edp, u32 *bwtype); +void rk3288_edp_set_lane_count(struct rk3288_edp *edp, u32 count); +void rk3288_edp_get_lane_count(struct rk3288_edp *edp, u32 *count); +void rk3288_edp_enable_enhanced_mode(struct rk3288_edp *edp, bool enable); +void rk3288_edp_set_training_pattern(struct rk3288_edp *edp, + enum pattern_set pattern); +void rk3288_edp_set_lane0_pre_emphasis(struct rk3288_edp *edp, u32 level); +void rk3288_edp_set_lane1_pre_emphasis(struct rk3288_edp *edp, u32 level); +void rk3288_edp_set_lane2_pre_emphasis(struct rk3288_edp *edp, u32 level); +void rk3288_edp_set_lane3_pre_emphasis(struct rk3288_edp *edp, u32 level); +void rk3288_edp_set_lane0_link_training(struct rk3288_edp *edp, + u32 training_lane); +void rk3288_edp_set_lane1_link_training(struct rk3288_edp *edp, + u32 training_lane); +void rk3288_edp_set_lane2_link_training(struct rk3288_edp *edp, + u32 training_lane); +void rk3288_edp_set_lane3_link_training(struct rk3288_edp *edp, + u32 training_lane); +u32 rk3288_edp_get_lane0_link_training(struct rk3288_edp *edp); +u32 rk3288_edp_get_lane1_link_training(struct rk3288_edp *edp); +u32 rk3288_edp_get_lane2_link_training(struct rk3288_edp *edp); +u32 rk3288_edp_get_lane3_link_training(struct rk3288_edp *edp); +void rk3288_edp_reset_macro(struct rk3288_edp *edp); +int rk3288_edp_init_video(struct rk3288_edp *edp); + +void rk3288_edp_set_video_color_format(struct rk3288_edp *edp, + u32 color_depth, + u32 color_space, + u32 dynamic_range, + u32 coeff); +int rk3288_edp_is_slave_video_stream_clock_on(struct rk3288_edp *edp); +void rk3288_edp_set_video_cr_mn( + struct rk3288_edp *edp, + enum clock_recovery_m_value_type type, + u32 m_value, + u32 n_value); +void rk3288_edp_set_video_timing_mode(struct rk3288_edp *edp, u32 type); +void rk3288_edp_enable_video_master(struct rk3288_edp *edp, bool enable); +void rk3288_edp_start_video(struct rk3288_edp *edp); +int rk3288_edp_is_video_stream_on(struct rk3288_edp *edp); +void rk3288_edp_config_video_slave_mode(struct rk3288_edp *edp, + struct video_info *video_info); +void rk3288_edp_enable_scrambling(struct rk3288_edp *edp); +void rk3288_edp_disable_scrambling(struct rk3288_edp *edp); +void rk3288_edp_rx_control(struct rk3288_edp *edp, bool enable); +int rk3288_edp_bist_cfg(struct rk3288_edp *edp); +void rk3288_edp_hw_link_training_en(struct rk3288_edp *edp); +int rk3288_edp_get_hw_lt_status(struct rk3288_edp *edp); +int rk3288_edp_wait_hw_lt_done(struct rk3288_edp *edp); +enum dp_irq_type rk3288_edp_get_irq_type(struct rk3288_edp *edp); +void rk3288_edp_clear_hotplug_interrupts(struct rk3288_edp *edp); + +/* I2C EDID Chip ID, Slave Address */ +#define I2C_EDID_DEVICE_ADDR 0x50 +#define I2C_E_EDID_DEVICE_ADDR 0x30 + +#define EDID_BLOCK_LENGTH 0x80 +#define EDID_HEADER_PATTERN 0x00 +#define EDID_EXTENSION_FLAG 0x7e +#define EDID_CHECKSUM 0x7f + +/* Definition for DPCD Register */ +#define DPCD_ADDR_DPCD_REV 0x0000 +#define DPCD_ADDR_MAX_LINK_RATE 0x0001 +#define DPCD_ADDR_MAX_LANE_COUNT 0x0002 +#define DPCD_ADDR_LINK_BW_SET 0x0100 +#define DPCD_ADDR_LANE_COUNT_SET 0x0101 +#define DPCD_ADDR_TRAINING_PATTERN_SET 0x0102 +#define DPCD_ADDR_TRAINING_LANE0_SET 0x0103 +#define DPCD_ADDR_LANE0_1_STATUS 0x0202 +#define DPCD_ADDR_LANE_ALIGN_STATUS_UPDATED 0x0204 +#define DPCD_ADDR_ADJUST_REQUEST_LANE0_1 0x0206 +#define DPCD_ADDR_ADJUST_REQUEST_LANE2_3 0x0207 +#define DPCD_ADDR_TEST_REQUEST 0x0218 +#define DPCD_ADDR_TEST_RESPONSE 0x0260 +#define DPCD_ADDR_TEST_EDID_CHECKSUM 0x0261 +#define DPCD_ADDR_SINK_POWER_STATE 0x0600 + +/* DPCD_ADDR_MAX_LANE_COUNT */ +#define DPCD_ENHANCED_FRAME_CAP(x) (((x) >> 7) & 0x1) +#define DPCD_MAX_LANE_COUNT(x) ((x) & 0x1f) + +/* DPCD_ADDR_LANE_COUNT_SET */ +#define DPCD_ENHANCED_FRAME_EN (0x1 << 7) +#define DPCD_LANE_COUNT_SET(x) ((x) & 0x1f) + +/* DPCD_ADDR_TRAINING_PATTERN_SET */ +#define DPCD_SCRAMBLING_DISABLED (0x1 << 5) +#define DPCD_SCRAMBLING_ENABLED (0x0 << 5) +#define DPCD_TRAINING_PATTERN_2 (0x2 << 0) +#define DPCD_TRAINING_PATTERN_1 (0x1 << 0) +#define DPCD_TRAINING_PATTERN_DISABLED (0x0 << 0) + +/* DPCD_ADDR_TRAINING_LANE0_SET */ +#define DPCD_MAX_PRE_EMPHASIS_REACHED (0x1 << 5) +#define DPCD_PRE_EMPHASIS_SET(x) (((x) & 0x3) << 3) +#define DPCD_PRE_EMPHASIS_GET(x) (((x) >> 3) & 0x3) +#define DPCD_PRE_EMPHASIS_PATTERN2_LEVEL0 (0x0 << 3) +#define DPCD_MAX_SWING_REACHED (0x1 << 2) +#define DPCD_VOLTAGE_SWING_SET(x) (((x) & 0x3) << 0) +#define DPCD_VOLTAGE_SWING_GET(x) (((x) >> 0) & 0x3) +#define DPCD_VOLTAGE_SWING_PATTERN1_LEVEL0 (0x0 << 0) + +/* DPCD_ADDR_LANE0_1_STATUS */ +#define DPCD_LANE_SYMBOL_LOCKED (0x1 << 2) +#define DPCD_LANE_CHANNEL_EQ_DONE (0x1 << 1) +#define DPCD_LANE_CR_DONE (0x1 << 0) +#define DPCD_CHANNEL_EQ_BITS (DPCD_LANE_CR_DONE| \ + DPCD_LANE_CHANNEL_EQ_DONE|\ + DPCD_LANE_SYMBOL_LOCKED) + +/* DPCD_ADDR_LANE_ALIGN__STATUS_UPDATED */ +#define DPCD_LINK_STATUS_UPDATED (0x1 << 7) +#define DPCD_DOWNSTREAM_PORT_STATUS_CHANGED (0x1 << 6) +#define DPCD_INTERLANE_ALIGN_DONE (0x1 << 0) + +/* DPCD_ADDR_TEST_REQUEST */ +#define DPCD_TEST_EDID_READ (0x1 << 2) + +/* DPCD_ADDR_TEST_RESPONSE */ +#define DPCD_TEST_EDID_CHECKSUM_WRITE (0x1 << 2) + +/* DPCD_ADDR_SINK_POWER_STATE */ +#define DPCD_SET_POWER_STATE_D0 (0x1 << 0) +#define DPCD_SET_POWER_STATE_D4 (0x2 << 0) + +#define DPCD_SYMBOL_ERR_CONUT_LANE0 0x210 + +#endif diff --git a/drivers/gpu/drm/rockchip/connector/rk3288_dp_reg.c b/drivers/gpu/drm/rockchip/connector/rk3288_dp_reg.c new file mode 100644 index 0000000..f558cea --- /dev/null +++ b/drivers/gpu/drm/rockchip/connector/rk3288_dp_reg.c @@ -0,0 +1,1192 @@ +/* +* Copyright (C) Fuzhou Rockchip Electronics Co.Ltd +* Author: +* yxj <yxj at rock-chips.com> +* cym <cym at rock-chips.com> +* +* based on exynos_dp_reg.c +* +* This program is free software; you can redistribute it and/or modify it +* under the terms of the GNU General Public License as published by the +* Free Software Foundation; either version 2 of the License, or (at your +* option) any later version. +*/ + +#include <linux/device.h> +#include <linux/delay.h> +#include <linux/io.h> + +#include "rk3288_dp_core.h" +#include "rk3288_dp_reg.h" + +void rk3288_edp_enable_video_mute(struct rk3288_edp *edp, bool enable) +{ + u32 val; + + if (enable) { + val = readl(edp->regs + VIDEO_CTL_1); + val |= VIDEO_MUTE; + writel(val, edp->regs + VIDEO_CTL_1); + } else { + val = readl(edp->regs + VIDEO_CTL_1); + val &= ~VIDEO_MUTE; + writel(val, edp->regs + VIDEO_CTL_1); + } +} + +void rk3288_edp_stop_video(struct rk3288_edp *edp) +{ + u32 val; + + val = readl(edp->regs + VIDEO_CTL_1); + val &= ~VIDEO_EN; + writel(val, edp->regs + VIDEO_CTL_1); +} + +void rk3288_edp_lane_swap(struct rk3288_edp *edp, bool enable) +{ + u32 val; + + if (enable) + val = LANE3_MAP_LOGIC_LANE_0 | LANE2_MAP_LOGIC_LANE_1 | + LANE1_MAP_LOGIC_LANE_2 | LANE0_MAP_LOGIC_LANE_3; + else + val = LANE3_MAP_LOGIC_LANE_3 | LANE2_MAP_LOGIC_LANE_2 | + LANE1_MAP_LOGIC_LANE_1 | LANE0_MAP_LOGIC_LANE_0; + + writel(val, edp->regs + LANE_MAP); +} + +void rk3288_edp_init_refclk(struct rk3288_edp *edp) +{ + writel(SEL_24M, edp->regs + ANALOG_CTL_2); + writel(REF_CLK_24M, edp->regs + PLL_REG_1); + + writel(0x95, edp->regs + PLL_REG_2); + writel(0x40, edp->regs + PLL_REG_3); + writel(0x58, edp->regs + PLL_REG_4); + writel(0x22, edp->regs + PLL_REG_5); + writel(0x19, edp->regs + SSC_REG); + writel(0x87, edp->regs + TX_REG_COMMON); + writel(0x03, edp->regs + DP_AUX); + writel(0x46, edp->regs + DP_BIAS); + writel(0x55, edp->regs + DP_RESERVE2); +} + +void rk3288_edp_init_interrupt(struct rk3288_edp *edp) +{ + /* Set interrupt pin assertion polarity as high */ + writel(INT_POL, edp->regs + INT_CTL); + + /* Clear pending valisers */ + writel(0xff, edp->regs + COMMON_INT_STA_1); + writel(0x4f, edp->regs + COMMON_INT_STA_2); + writel(0xff, edp->regs + COMMON_INT_STA_3); + writel(0x27, edp->regs + COMMON_INT_STA_4); + + writel(0x7f, edp->regs + DP_INT_STA); + + /* 0:mask,1: unmask */ + writel(0x00, edp->regs + COMMON_INT_MASK_1); + writel(0x00, edp->regs + COMMON_INT_MASK_2); + writel(0x00, edp->regs + COMMON_INT_MASK_3); + writel(0x00, edp->regs + COMMON_INT_MASK_4); + writel(0x00, edp->regs + DP_INT_STA_MASK); +} + +void rk3288_edp_reset(struct rk3288_edp *edp) +{ + u32 val; + + rk3288_edp_stop_video(edp); + rk3288_edp_enable_video_mute(edp, 0); + + val = VID_CAP_FUNC_EN_N | AUD_FIFO_FUNC_EN_N | + AUD_FUNC_EN_N | HDCP_FUNC_EN_N | SW_FUNC_EN_N; + writel(val, edp->regs + FUNC_EN_1); + + val = SSC_FUNC_EN_N | AUX_FUNC_EN_N | + SERDES_FIFO_FUNC_EN_N | + LS_CLK_DOMAIN_FUNC_EN_N; + writel(val, edp->regs + FUNC_EN_2); + + usleep_range(20, 30); + + rk3288_edp_lane_swap(edp, 0); + + writel(0x0, edp->regs + SYS_CTL_1); + writel(0x40, edp->regs + SYS_CTL_2); + writel(0x0, edp->regs + SYS_CTL_3); + writel(0x0, edp->regs + SYS_CTL_4); + + writel(0x0, edp->regs + PKT_SEND_CTL); + writel(0x0, edp->regs + HDCP_CTL); + + writel(0x5e, edp->regs + HPD_DEGLITCH_L); + writel(0x1a, edp->regs + HPD_DEGLITCH_H); + + writel(0x10, edp->regs + LINK_DEBUG_CTL); + + writel(0x0, edp->regs + VIDEO_FIFO_THRD); + writel(0x20, edp->regs + AUDIO_MARGIN); + + writel(0x4, edp->regs + M_VID_GEN_FILTER_TH); + writel(0x2, edp->regs + M_AUD_GEN_FILTER_TH); + + writel(0x0, edp->regs + SOC_GENERAL_CTL); +} + +void rk3288_edp_config_interrupt(struct rk3288_edp *edp) +{ + u32 val; + + /* 0: mask, 1: unmask */ + val = 0; + writel(val, edp->regs + COMMON_INT_MASK_1); + + writel(val, edp->regs + COMMON_INT_MASK_2); + + writel(val, edp->regs + COMMON_INT_MASK_3); + + writel(val, edp->regs + COMMON_INT_MASK_4); + + writel(val, edp->regs + DP_INT_STA_MASK); +} + +u32 rk3288_edp_get_pll_lock_status(struct rk3288_edp *edp) +{ + u32 val; + + val = readl(edp->regs + DEBUG_CTL); + if (val & PLL_LOCK) + return DP_PLL_LOCKED; + else + return DP_PLL_UNLOCKED; +} + +void rk3288_edp_analog_power_ctr(struct rk3288_edp *edp, bool enable) +{ + u32 val; + + if (enable) { + val = PD_EXP_BG | PD_AUX | PD_PLL | + PD_CH3 | PD_CH2 | PD_CH1 | PD_CH0; + writel(val, edp->regs + DP_PWRDN); + usleep_range(10, 20); + writel(0x0, edp->regs + DP_PWRDN); + } else { + val = PD_EXP_BG | PD_AUX | PD_PLL | + PD_CH3 | PD_CH2 | PD_CH1 | PD_CH0; + writel(val, edp->regs + DP_PWRDN); + } +} + +void rk3288_edp_init_analog_func(struct rk3288_edp *edp) +{ + u32 val; + int wt = 0; + + rk3288_edp_analog_power_ctr(edp, 1); + + val = PLL_LOCK_CHG; + writel(val, edp->regs + COMMON_INT_STA_1); + + val = readl(edp->regs + DEBUG_CTL); + val &= ~(F_PLL_LOCK | PLL_LOCK_CTRL); + writel(val, edp->regs + DEBUG_CTL); + + /* Power up PLL */ + while (wt < 100) { + if (rk3288_edp_get_pll_lock_status(edp) == DP_PLL_LOCKED) { + dev_dbg(edp->dev, "edp pll locked\n"); + break; + } else { + wt++; + udelay(5); + } + } + + /* Enable Serdes FIFO function and Link symbol clock domain module */ + val = readl(edp->regs + FUNC_EN_2); + val &= ~(SERDES_FIFO_FUNC_EN_N | LS_CLK_DOMAIN_FUNC_EN_N + | AUX_FUNC_EN_N | SSC_FUNC_EN_N); + writel(val, edp->regs + FUNC_EN_2); +} + +void rk3288_edp_init_hpd(struct rk3288_edp *edp) +{ + u32 val; + + val = HOTPLUG_CHG | HPD_LOST | PLUG; + writel(val, edp->regs + COMMON_INT_STA_4); + + val = INT_HPD; + writel(val, edp->regs + DP_INT_STA); + + val = readl(edp->regs + SYS_CTL_3); + val |= (F_HPD | HPD_CTRL); + writel(val, edp->regs + SYS_CTL_3); +} + +void rk3288_edp_reset_aux(struct rk3288_edp *edp) +{ + u32 val; + + /* Disable AUX channel module */ + val = readl(edp->regs + FUNC_EN_2); + val |= AUX_FUNC_EN_N; + writel(val, edp->regs + FUNC_EN_2); +} + +void rk3288_edp_init_aux(struct rk3288_edp *edp) +{ + u32 val; + + /* Clear inerrupts related to AUX channel */ + val = RPLY_RECEIV | AUX_ERR; + writel(val, edp->regs + DP_INT_STA); + + rk3288_edp_reset_aux(edp); + + /* Receive AUX Channel DEFER commands equal to DEFFER_COUNT*64 */ + val = DEFER_CTRL_EN | DEFER_COUNT(1); + writel(val, edp->regs + AUX_CH_DEFER_CTL); + + /* Enable AUX channel module */ + val = readl(edp->regs + FUNC_EN_2); + val &= ~AUX_FUNC_EN_N; + writel(val, edp->regs + FUNC_EN_2); +} + +int rk3288_edp_get_plug_in_status(struct rk3288_edp *edp) +{ + u32 val; + + val = readl(edp->regs + SYS_CTL_3); + if (val & HPD_STATUS) + return 0; + + return -EINVAL; +} + +void rk3288_edp_enable_sw_function(struct rk3288_edp *edp) +{ + u32 val; + + val = readl(edp->regs + FUNC_EN_1); + val &= ~SW_FUNC_EN_N; + writel(val, edp->regs + FUNC_EN_1); +} + +int rk3288_edp_start_aux_transaction(struct rk3288_edp *edp) +{ + int val; + int retval = 0; + int timeout_loop = 0; + int aux_timeout = 0; + + /* Enable AUX CH operation */ + val = readl(edp->regs + AUX_CH_CTL_2); + val |= AUX_EN; + writel(val, edp->regs + AUX_CH_CTL_2); + + /* Is AUX CH operation enabled? */ + val = readl(edp->regs + AUX_CH_CTL_2); + while (val & AUX_EN) { + aux_timeout++; + if ((DP_TIMEOUT_LOOP_CNT * 10) < aux_timeout) { + dev_err(edp->dev, "AUX CH enable timeout!\n"); + return -ETIMEDOUT; + } + val = readl(edp->regs + AUX_CH_CTL_2); + usleep_range(100, 110); + } + + /* Is AUX CH command redply received? */ + val = readl(edp->regs + DP_INT_STA); + while (!(val & RPLY_RECEIV)) { + timeout_loop++; + if (DP_TIMEOUT_LOOP_CNT < timeout_loop) { + dev_err(edp->dev, "AUX CH command redply failed!\n"); + return -ETIMEDOUT; + } + val = readl(edp->regs + DP_INT_STA); + usleep_range(10, 20); + } + + /* Clear interrupt source for AUX CH command redply */ + writel(RPLY_RECEIV, edp->regs + DP_INT_STA); + + /* Clear interrupt source for AUX CH access error */ + val = readl(edp->regs + DP_INT_STA); + if (val & AUX_ERR) { + writel(AUX_ERR, edp->regs + DP_INT_STA); + return -EREMOTEIO; + } + + /* Check AUX CH error access status */ + val = readl(edp->regs + AUX_CH_STA); + if ((val & AUX_STATUS_MASK) != 0) { + dev_err(edp->dev, "AUX CH error happens: %d\n\n", + val & AUX_STATUS_MASK); + return -EREMOTEIO; + } + + return retval; +} + +int rk3288_edp_write_byte_to_dpcd(struct rk3288_edp *edp, + unsigned int val_addr, + unsigned char data) +{ + u32 val; + int i; + int retval; + + for (i = 0; i < 3; i++) { + /* Clear AUX CH data buffer */ + val = BUF_CLR; + writel(val, edp->regs + BUFFER_DATA_CTL); + + /* Select DPCD device address */ + val = AUX_ADDR_7_0(val_addr); + writel(val, edp->regs + DP_AUX_ADDR_7_0); + val = AUX_ADDR_15_8(val_addr); + writel(val, edp->regs + DP_AUX_ADDR_15_8); + val = AUX_ADDR_19_16(val_addr); + writel(val, edp->regs + DP_AUX_ADDR_19_16); + + /* Write data buffer */ + val = (unsigned int)data; + writel(val, edp->regs + BUF_DATA_0); + + /* + * Set DisplayPort transaction and write 1 byte + * If bit 3 is 1, DisplayPort transaction. + * If Bit 3 is 0, I2C transaction. + */ + val = AUX_TX_COMM_DP_TRANSACTION | AUX_TX_COMM_WRITE; + writel(val, edp->regs + AUX_CH_CTL_1); + + /* Start AUX transaction */ + retval = rk3288_edp_start_aux_transaction(edp); + if (retval == 0) + break; + else + dev_dbg(edp->dev, "Aux Transaction fail!\n"); + } + + return retval; +} + +int rk3288_edp_read_byte_from_dpcd(struct rk3288_edp *edp, + unsigned int val_addr, + unsigned char *data) +{ + u32 val; + int i; + int retval; + + for (i = 0; i < 10; i++) { + /* Clear AUX CH data buffer */ + val = BUF_CLR; + writel(val, edp->regs + BUFFER_DATA_CTL); + + /* Select DPCD device address */ + val = AUX_ADDR_7_0(val_addr); + writel(val, edp->regs + DP_AUX_ADDR_7_0); + val = AUX_ADDR_15_8(val_addr); + writel(val, edp->regs + DP_AUX_ADDR_15_8); + val = AUX_ADDR_19_16(val_addr); + writel(val, edp->regs + DP_AUX_ADDR_19_16); + + /* + * Set DisplayPort transaction and read 1 byte + * If bit 3 is 1, DisplayPort transaction. + * If Bit 3 is 0, I2C transaction. + */ + val = AUX_TX_COMM_DP_TRANSACTION | AUX_TX_COMM_READ; + writel(val, edp->regs + AUX_CH_CTL_1); + + /* Start AUX transaction */ + retval = rk3288_edp_start_aux_transaction(edp); + if (retval == 0) + break; + else + dev_dbg(edp->dev, "Aux Transaction fail!\n"); + } + + /* Read data buffer */ + val = readl(edp->regs + BUF_DATA_0); + *data = (unsigned char)(val & 0xff); + + return retval; +} + +int rk3288_edp_write_bytes_to_dpcd(struct rk3288_edp *edp, + unsigned int val_addr, + unsigned int count, + unsigned char data[]) +{ + u32 val; + unsigned int start_offset; + unsigned int cur_data_count; + unsigned int cur_data_idx; + int i; + int retval = 0; + + /* Clear AUX CH data buffer */ + val = BUF_CLR; + writel(val, edp->regs + BUFFER_DATA_CTL); + + start_offset = 0; + while (start_offset < count) { + /* Buffer size of AUX CH is 16 * 4bytes */ + if ((count - start_offset) > 16) + cur_data_count = 16; + else + cur_data_count = count - start_offset; + + for (i = 0; i < 10; i++) { + /* Select DPCD device address */ + val = AUX_ADDR_7_0(val_addr + start_offset); + writel(val, edp->regs + DP_AUX_ADDR_7_0); + val = AUX_ADDR_15_8(val_addr + start_offset); + writel(val, edp->regs + DP_AUX_ADDR_15_8); + val = AUX_ADDR_19_16(val_addr + start_offset); + writel(val, edp->regs + DP_AUX_ADDR_19_16); + + for (cur_data_idx = 0; cur_data_idx < cur_data_count; + cur_data_idx++) { + val = data[start_offset + cur_data_idx]; + writel(val, edp->regs + BUF_DATA_0 + + 4 * cur_data_idx); + } + + /* + * Set DisplayPort transaction and write + * If bit 3 is 1, DisplayPort transaction. + * If Bit 3 is 0, I2C transaction. + */ + val = AUX_LENGTH(cur_data_count) | + AUX_TX_COMM_DP_TRANSACTION | AUX_TX_COMM_WRITE; + writel(val, edp->regs + AUX_CH_CTL_1); + + /* Start AUX transaction */ + retval = rk3288_edp_start_aux_transaction(edp); + if (retval == 0) + break; + else + dev_dbg(edp->dev, "Aux Transaction fail!\n"); + } + + start_offset += cur_data_count; + } + + return retval; +} + +int rk3288_edp_read_bytes_from_dpcd(struct rk3288_edp *edp, + unsigned int val_addr, + unsigned int count, + unsigned char data[]) +{ + u32 val; + unsigned int start_offset; + unsigned int cur_data_count; + unsigned int cur_data_idx; + int i; + int retval = 0; + + /* Clear AUX CH data buffer */ + val = BUF_CLR; + writel(val, edp->regs + BUFFER_DATA_CTL); + + start_offset = 0; + while (start_offset < count) { + /* Buffer size of AUX CH is 16 * 4bytes */ + if ((count - start_offset) > 16) + cur_data_count = 16; + else + cur_data_count = count - start_offset; + + /* AUX CH Request Transaction process */ + for (i = 0; i < 10; i++) { + /* Select DPCD device address */ + val = AUX_ADDR_7_0(val_addr + start_offset); + writel(val, edp->regs + DP_AUX_ADDR_7_0); + val = AUX_ADDR_15_8(val_addr + start_offset); + writel(val, edp->regs + DP_AUX_ADDR_15_8); + val = AUX_ADDR_19_16(val_addr + start_offset); + writel(val, edp->regs + DP_AUX_ADDR_19_16); + + /* + * Set DisplayPort transaction and read + * If bit 3 is 1, DisplayPort transaction. + * If Bit 3 is 0, I2C transaction. + */ + val = AUX_LENGTH(cur_data_count) | + AUX_TX_COMM_DP_TRANSACTION | AUX_TX_COMM_READ; + writel(val, edp->regs + AUX_CH_CTL_1); + + /* Start AUX transaction */ + retval = rk3288_edp_start_aux_transaction(edp); + if (retval == 0) + break; + else + dev_dbg(edp->dev, "Aux Transaction fail!\n"); + } + + for (cur_data_idx = 0; cur_data_idx < cur_data_count; + cur_data_idx++) { + val = readl(edp->regs + BUF_DATA_0 + + 4 * cur_data_idx); + data[start_offset + cur_data_idx] = + (unsigned char)val; + } + + start_offset += cur_data_count; + } + + return retval; +} + +int rk3288_edp_select_i2c_device(struct rk3288_edp *edp, + unsigned int device_addr, + unsigned int val_addr) +{ + u32 val; + int retval; + + /* Set EDID device address */ + val = device_addr; + writel(val, edp->regs + DP_AUX_ADDR_7_0); + writel(0x0, edp->regs + DP_AUX_ADDR_15_8); + writel(0x0, edp->regs + DP_AUX_ADDR_19_16); + + /* Set offset from base address of EDID device */ + writel(val_addr, edp->regs + BUF_DATA_0); + + /* + * Set I2C transaction and write address + * If bit 3 is 1, DisplayPort transaction. + * If Bit 3 is 0, I2C transaction. + */ + val = AUX_TX_COMM_I2C_TRANSACTION | AUX_TX_COMM_MOT | + AUX_TX_COMM_WRITE; + writel(val, edp->regs + AUX_CH_CTL_1); + + /* Start AUX transaction */ + retval = rk3288_edp_start_aux_transaction(edp); + if (retval != 0) + dev_dbg(edp->dev, "Aux Transaction fail!\n"); + + return retval; +} + +int rk3288_edp_read_byte_from_i2c(struct rk3288_edp *edp, + unsigned int device_addr, + unsigned int val_addr, + unsigned int *data) +{ + u32 val; + int i; + int retval; + + for (i = 0; i < 10; i++) { + /* Clear AUX CH data buffer */ + val = BUF_CLR; + writel(val, edp->regs + BUFFER_DATA_CTL); + + /* Select EDID device */ + retval = rk3288_edp_select_i2c_device(edp, + device_addr, + val_addr); + if (retval != 0) { + dev_err(edp->dev, "Select EDID device fail!\n"); + continue; + } + + /* + * Set I2C transaction and read data + * If bit 3 is 1, DisplayPort transaction. + * If Bit 3 is 0, I2C transaction. + */ + val = AUX_TX_COMM_I2C_TRANSACTION | AUX_TX_COMM_READ; + writel(val, edp->regs + AUX_CH_CTL_1); + + /* Start AUX transaction */ + retval = rk3288_edp_start_aux_transaction(edp); + if (retval == 0) + break; + else + dev_dbg(edp->dev, "Aux Transaction fail!\n"); + } + + /* Read data */ + if (retval == 0) + *data = readl(edp->regs + BUF_DATA_0); + + return retval; +} + +int rk3288_edp_read_bytes_from_i2c(struct rk3288_edp *edp, + unsigned int device_addr, + unsigned int val_addr, + unsigned int count, + unsigned char edid[]) +{ + u32 val; + unsigned int i, j; + unsigned int cur_data_idx; + unsigned int defer = 0; + int retval = 0; + + for (i = 0; i < count; i += 16) { + for (j = 0; j < 100; j++) { + /* Clear AUX CH data buffer */ + val = BUF_CLR; + writel(val, edp->regs + BUFFER_DATA_CTL); + + /* Set normal AUX CH command */ + val = readl(edp->regs + AUX_CH_CTL_2); + val &= ~ADDR_ONLY; + writel(val, edp->regs + AUX_CH_CTL_2); + + /* + * If Rx sends defer, Tx sends only reads + * request without sending addres + */ + if (!defer) + retval = rk3288_edp_select_i2c_device( + edp, device_addr, val_addr + i); + else + defer = 0; + + /* + * Set I2C transaction and write data + * If bit 3 is 1, DisplayPort transaction. + * If Bit 3 is 0, I2C transaction. + */ + val = AUX_LENGTH(16) | AUX_TX_COMM_I2C_TRANSACTION | + AUX_TX_COMM_READ; + writel(val, edp->regs + AUX_CH_CTL_1); + + /* Start AUX transaction */ + retval = rk3288_edp_start_aux_transaction(edp); + if (retval == 0) + break; + else + dev_dbg(edp->dev, "Aux Transaction fail!\n"); + + /* Check if Rx sends defer */ + val = readl(edp->regs + AUX_RX_COMM); + if (val == AUX_RX_COMM_AUX_DEFER || + val == AUX_RX_COMM_I2C_DEFER) { + dev_err(edp->dev, "Defer: %d\n\n", val); + defer = 1; + } + } + + for (cur_data_idx = 0; cur_data_idx < 16; cur_data_idx++) { + val = readl(edp->regs + BUF_DATA_0 + 4 * cur_data_idx); + edid[i + cur_data_idx] = (unsigned char)val; + } + } + + return retval; +} + +void rk3288_edp_set_link_bandwidth(struct rk3288_edp *edp, u32 bwtype) +{ + u32 val; + + val = bwtype; + if ((bwtype == LINK_RATE_2_70GBPS) || (bwtype == LINK_RATE_1_62GBPS)) + writel(val, edp->regs + LINK_BW_SET); +} + +void rk3288_edp_get_link_bandwidth(struct rk3288_edp *edp, u32 *bwtype) +{ + u32 val; + + val = readl(edp->regs + LINK_BW_SET); + *bwtype = val; +} + +void rk3288_edp_hw_link_training_en(struct rk3288_edp *edp) +{ + u32 val; + + val = HW_LT_EN; + writel(val, edp->regs + HW_LT_CTL); +} + +int rk3288_edp_wait_hw_lt_done(struct rk3288_edp *edp) +{ + u32 val; + + val = readl(edp->regs + DP_INT_STA); + if (val&HW_LT_DONE) { + writel(val, edp->regs + DP_INT_STA); + return 0; + } else { + return 1; + } +} + +int rk3288_edp_get_hw_lt_status(struct rk3288_edp *edp) +{ + u32 val; + + val = readl(edp->regs + HW_LT_CTL); + return (val & HW_LT_ERR_CODE_MASK) >> 4; +} +void rk3288_edp_set_lane_count(struct rk3288_edp *edp, u32 count) +{ + u32 val; + + val = count; + writel(val, edp->regs + LANE_CNT_SET); +} + +void rk3288_edp_get_lane_count(struct rk3288_edp *edp, u32 *count) +{ + u32 val; + + val = readl(edp->regs + LANE_CNT_SET); + *count = val; +} + +void rk3288_edp_enable_enhanced_mode(struct rk3288_edp *edp, bool enable) +{ + u32 val; + + if (enable) { + val = readl(edp->regs + SYS_CTL_4); + val |= ENHANCED; + writel(val, edp->regs + SYS_CTL_4); + } else { + val = readl(edp->regs + SYS_CTL_4); + val &= ~ENHANCED; + writel(val, edp->regs + SYS_CTL_4); + } +} + +void rk3288_edp_set_training_pattern(struct rk3288_edp *edp, + enum pattern_set pattern) +{ + u32 val; + + switch (pattern) { + case PRBS7: + val = SCRAMBLING_ENABLE | LINK_QUAL_PATTERN_SET_PRBS7; + writel(val, edp->regs + TRAINING_PTN_SET); + break; + case D10_2: + val = SCRAMBLING_ENABLE | LINK_QUAL_PATTERN_SET_D10_2; + writel(val, edp->regs + TRAINING_PTN_SET); + break; + case TRAINING_PTN1: + val = SCRAMBLING_DISABLE | SW_TRAINING_PATTERN_SET_PTN1; + writel(val, edp->regs + TRAINING_PTN_SET); + break; + case TRAINING_PTN2: + val = SCRAMBLING_DISABLE | SW_TRAINING_PATTERN_SET_PTN2; + writel(val, edp->regs + TRAINING_PTN_SET); + break; + case DP_NONE: + val = SCRAMBLING_ENABLE | + LINK_QUAL_PATTERN_SET_DISABLE | + SW_TRAINING_PATTERN_SET_DISABLE; + writel(val, edp->regs + TRAINING_PTN_SET); + break; + default: + break; + } +} + +void rk3288_edp_set_lane0_pre_emphasis(struct rk3288_edp *edp, u32 level) +{ + u32 val; + + val = level << PRE_EMPHASIS_SET_SHIFT; + writel(val, edp->regs + LN0_LINK_TRAINING_CTL); +} + +void rk3288_edp_set_lane1_pre_emphasis(struct rk3288_edp *edp, u32 level) +{ + u32 val; + + val = level << PRE_EMPHASIS_SET_SHIFT; + writel(val, edp->regs + LN1_LINK_TRAINING_CTL); +} + +void rk3288_edp_set_lane2_pre_emphasis(struct rk3288_edp *edp, u32 level) +{ + u32 val; + + val = level << PRE_EMPHASIS_SET_SHIFT; + writel(val, edp->regs + LN2_LINK_TRAINING_CTL); +} + +void rk3288_edp_set_lane3_pre_emphasis(struct rk3288_edp *edp, u32 level) +{ + u32 val; + + val = level << PRE_EMPHASIS_SET_SHIFT; + writel(val, edp->regs + LN3_LINK_TRAINING_CTL); +} + +void rk3288_edp_set_lane0_link_training(struct rk3288_edp *edp, + u32 training_lane) +{ + u32 val; + + val = training_lane; + writel(val, edp->regs + LN0_LINK_TRAINING_CTL); +} + +void rk3288_edp_set_lane1_link_training(struct rk3288_edp *edp, + u32 training_lane) +{ + u32 val; + + val = training_lane; + writel(val, edp->regs + LN1_LINK_TRAINING_CTL); +} + +void rk3288_edp_set_lane2_link_training(struct rk3288_edp *edp, + u32 training_lane) +{ + u32 val; + + val = training_lane; + writel(val, edp->regs + LN2_LINK_TRAINING_CTL); +} + +void rk3288_edp_set_lane3_link_training(struct rk3288_edp *edp, + u32 training_lane) +{ + u32 val; + + val = training_lane; + writel(val, edp->regs + LN3_LINK_TRAINING_CTL); +} + +u32 rk3288_edp_get_lane0_link_training(struct rk3288_edp *edp) +{ + u32 val; + + val = readl(edp->regs + LN0_LINK_TRAINING_CTL); + return val; +} + +u32 rk3288_edp_get_lane1_link_training(struct rk3288_edp *edp) +{ + u32 val; + + val = readl(edp->regs + LN1_LINK_TRAINING_CTL); + return val; +} + +u32 rk3288_edp_get_lane2_link_training(struct rk3288_edp *edp) +{ + u32 val; + + val = readl(edp->regs + LN2_LINK_TRAINING_CTL); + return val; +} + +u32 rk3288_edp_get_lane3_link_training(struct rk3288_edp *edp) +{ + u32 val; + + val = readl(edp->regs + LN3_LINK_TRAINING_CTL); + return val; +} + +void rk3288_edp_reset_macro(struct rk3288_edp *edp) +{ +} + +int rk3288_edp_init_video(struct rk3288_edp *edp) +{ + u32 val; + + val = VSYNC_DET | VID_FORMAT_CHG | VID_CLK_CHG; + writel(val, edp->regs + COMMON_INT_STA_1); + + val = 0x0; + writel(val, edp->regs + SYS_CTL_1); + + val = CHA_CRI(4) | CHA_CTRL; + writel(val, edp->regs + SYS_CTL_2); + + val = VID_HRES_TH(2) | VID_VRES_TH(0); + writel(val, edp->regs + VIDEO_CTL_8); + + return 0; +} + +void rk3288_edp_set_video_color_format(struct rk3288_edp *edp, + u32 color_dedpth, + u32 color_space, + u32 dynamic_range, + u32 coeff) +{ + u32 val; + + /* Configure the input color dedpth, color space, dynamic range */ + val = (dynamic_range << IN_D_RANGE_SHIFT) | + (color_dedpth << IN_BPC_SHIFT) | + (color_space << IN_COLOR_F_SHIFT); + writel(val, edp->regs + VIDEO_CTL_2); + + /* Set Input Color YCbCr Coefficients to ITU601 or ITU709 */ + val = readl(edp->regs + VIDEO_CTL_3); + val &= ~IN_YC_COEFFI_MASK; + if (coeff) + val |= IN_YC_COEFFI_ITU709; + else + val |= IN_YC_COEFFI_ITU601; + writel(val, edp->regs + VIDEO_CTL_3); +} + +int rk3288_edp_is_slave_video_stream_clock_on(struct rk3288_edp *edp) +{ + u32 val; + + val = readl(edp->regs + SYS_CTL_1); + writel(val, edp->regs + SYS_CTL_1); + + val = readl(edp->regs + SYS_CTL_1); + + if (!(val & DET_STA)) { + dev_dbg(edp->dev, "Input stream clock not detected.\n"); + return -EINVAL; + } + + val = readl(edp->regs + SYS_CTL_2); + writel(val, edp->regs + SYS_CTL_2); + + val = readl(edp->regs + SYS_CTL_2); + if (val & CHA_STA) { + dev_dbg(edp->dev, "Input stream clk is changing\n"); + return -EINVAL; + } + + return 0; +} + +void rk3288_edp_set_video_cr_mn(struct rk3288_edp *edp, + enum clock_recovery_m_value_type type, + u32 m_value, + u32 n_value) +{ + u32 val; + + if (type == REGISTER_M) { + val = readl(edp->regs + SYS_CTL_4); + val |= FIX_M_VID; + writel(val, edp->regs + SYS_CTL_4); + val = m_value & 0xff; + writel(val, edp->regs + M_VID_0); + val = (m_value >> 8) & 0xff; + writel(val, edp->regs + M_VID_1); + val = (m_value >> 16) & 0xff; + writel(val, edp->regs + M_VID_2); + + val = n_value & 0xff; + writel(val, edp->regs + N_VID_0); + val = (n_value >> 8) & 0xff; + writel(val, edp->regs + N_VID_1); + val = (n_value >> 16) & 0xff; + writel(val, edp->regs + N_VID_2); + } else { + val = readl(edp->regs + SYS_CTL_4); + val &= ~FIX_M_VID; + writel(val, edp->regs + SYS_CTL_4); + + writel(0x00, edp->regs + N_VID_0); + writel(0x80, edp->regs + N_VID_1); + writel(0x00, edp->regs + N_VID_2); + } +} + +void rk3288_edp_set_video_timing_mode(struct rk3288_edp *edp, u32 type) +{ + u32 val; + + if (type == VIDEO_TIMING_FROM_CAPTURE) { + val = readl(edp->regs + VIDEO_CTL_10); + val &= ~F_SEL; + writel(val, edp->regs + VIDEO_CTL_10); + } else { + val = readl(edp->regs + VIDEO_CTL_10); + val |= F_SEL; + writel(val, edp->regs + VIDEO_CTL_10); + } +} + +int rk3288_edp_bist_cfg(struct rk3288_edp *edp) +{ + struct video_info *video_info = &edp->video_info; + struct drm_display_mode *mode = &edp->mode; + u16 x_total, y_total, x_act; + u32 val; + + x_total = mode->htotal; + y_total = mode->vtotal; + x_act = mode->hdisplay; + + rk3288_edp_set_video_cr_mn(edp, CALCULATED_M, 0, 0); + rk3288_edp_set_video_color_format(edp, video_info->color_depth, + video_info->color_space, + video_info->dynamic_range, + video_info->ycbcr_coeff); + + val = y_total & 0xff; + writel(val, edp->regs + TOTAL_LINE_CFG_L); + val = (y_total >> 8); + writel(val, edp->regs + TOTAL_LINE_CFG_H); + val = (mode->vdisplay & 0xff); + writel(val, edp->regs + ATV_LINE_CFG_L); + val = (mode->vdisplay >> 8); + writel(val, edp->regs + ATV_LINE_CFG_H); + val = (mode->vsync_start - mode->vdisplay); + writel(val, edp->regs + VF_PORCH_REG); + val = (mode->vsync_end - mode->vsync_start); + writel(val, edp->regs + VSYNC_CFG_REG); + val = (mode->vtotal - mode->vsync_end); + writel(val, edp->regs + VB_PORCH_REG); + val = x_total & 0xff; + writel(val, edp->regs + TOTAL_PIXELL_REG); + val = x_total >> 8; + writel(val, edp->regs + TOTAL_PIXELH_REG); + val = (x_act & 0xff); + writel(val, edp->regs + ATV_PIXELL_REG); + val = (x_act >> 8); + writel(val, edp->regs + ATV_PIXELH_REG); + val = (mode->hsync_start - mode->hdisplay) & 0xff; + writel(val, edp->regs + HF_PORCHL_REG); + val = (mode->hsync_start - mode->hdisplay) >> 8; + writel(val, edp->regs + HF_PORCHH_REG); + val = (mode->hsync_end - mode->hsync_start) & 0xff; + writel(val, edp->regs + HSYNC_CFGL_REG); + val = (mode->hsync_end - mode->hsync_start) >> 8; + writel(val, edp->regs + HSYNC_CFGH_REG); + val = (mode->htotal - mode->hsync_end) & 0xff; + writel(val, edp->regs + HB_PORCHL_REG); + val = (mode->htotal - mode->hsync_end) >> 8; + writel(val, edp->regs + HB_PORCHH_REG); + + val = BIST_EN | BIST_WH_64 | BIST_TYPE_COLR_BAR; + writel(val, edp->regs + VIDEO_CTL_4); + + val = readl(edp->regs + VIDEO_CTL_10); + val &= ~F_SEL; + writel(val, edp->regs + VIDEO_CTL_10); + return 0; +} + +void rk3288_edp_enable_video_master(struct rk3288_edp *edp, bool enable) +{ +} + +void rk3288_edp_start_video(struct rk3288_edp *edp) +{ + u32 val; + + val = readl(edp->regs + VIDEO_CTL_1); + val |= VIDEO_EN; + writel(val, edp->regs + VIDEO_CTL_1); +} + +int rk3288_edp_is_video_stream_on(struct rk3288_edp *edp) +{ + u32 val; + + val = readl(edp->regs + SYS_CTL_3); + writel(val, edp->regs + SYS_CTL_3); + + val = readl(edp->regs + SYS_CTL_3); + if (!(val & STRM_VALID)) { + dev_dbg(edp->dev, "Input video stream is not detected.\n"); + return -EINVAL; + } + + return 0; +} + +void rk3288_edp_config_video_slave_mode(struct rk3288_edp *edp, + struct video_info *video_info) +{ + u32 val; + + val = readl(edp->regs + FUNC_EN_1); + val &= ~(VID_FIFO_FUNC_EN_N | VID_CAP_FUNC_EN_N); + writel(val, edp->regs + FUNC_EN_1); + + val = readl(edp->regs + VIDEO_CTL_10); + val &= ~INTERACE_SCAN_CFG; + val |= (video_info->interlaced << 2); + writel(val, edp->regs + VIDEO_CTL_10); + + val = readl(edp->regs + VIDEO_CTL_10); + val &= ~VSYNC_POLARITY_CFG; + val |= (video_info->v_sync_polarity << 1); + writel(val, edp->regs + VIDEO_CTL_10); + + val = readl(edp->regs + VIDEO_CTL_10); + val &= ~HSYNC_POLARITY_CFG; + val |= (video_info->h_sync_polarity << 0); + writel(val, edp->regs + VIDEO_CTL_10); +} + +void rk3288_edp_enable_scrambling(struct rk3288_edp *edp) +{ + u32 val; + + val = readl(edp->regs + TRAINING_PTN_SET); + val &= ~SCRAMBLING_DISABLE; + writel(val, edp->regs + TRAINING_PTN_SET); +} + +void rk3288_edp_disable_scrambling(struct rk3288_edp *edp) +{ + u32 val; + + val = readl(edp->regs + TRAINING_PTN_SET); + val |= SCRAMBLING_DISABLE; + writel(val, edp->regs + TRAINING_PTN_SET); +} + +enum dp_irq_type rk3288_edp_get_irq_type(struct rk3288_edp *edp) +{ + u32 val; + + /* Parse hotplug interrupt status register */ + val = readl(edp->regs + COMMON_INT_STA_4); + if (val & PLUG) + return DP_IRQ_TYPE_HP_CABLE_IN; + + if (val & HPD_LOST) + return DP_IRQ_TYPE_HP_CABLE_OUT; + + if (val & HOTPLUG_CHG) + return DP_IRQ_TYPE_HP_CHANGE; + + return DP_IRQ_TYPE_UNKNOWN; +} + +void rk3288_edp_clear_hotplug_interrupts(struct rk3288_edp *edp) +{ + u32 val; + + val = HOTPLUG_CHG | HPD_LOST | PLUG; + writel(val, edp->regs + COMMON_INT_STA_4); + + val = INT_HPD; + writel(val, edp->regs + DP_INT_STA); +} diff --git a/drivers/gpu/drm/rockchip/connector/rk3288_dp_reg.h b/drivers/gpu/drm/rockchip/connector/rk3288_dp_reg.h new file mode 100644 index 0000000..baf8d90 --- /dev/null +++ b/drivers/gpu/drm/rockchip/connector/rk3288_dp_reg.h @@ -0,0 +1,378 @@ +/* +* Copyright (C) Fuzhou Rockchip Electronics Co.Ltd +* Author: +* yxj <yxj at rock-chips.com> +* cym <cym at rock-chips.com> +* +* based on exynos_dp_reg.h +* +* This program is free software; you can redistribute it and/or modify it +* under the terms of the GNU General Public License as published by the +* Free Software Foundation; either version 2 of the License, or (at your +* option) any later version. +*/ + +#ifndef _RK32XX_DP_REG_H +#define _RK32XX_DP_REG_H + +#define DP_VERSION 0x10 + +#define TX_SW_RST 0x14 + +#define FUNC_EN_1 0x18 +#define VID_CAP_FUNC_EN_N BIT(6) +#define VID_FIFO_FUNC_EN_N BIT(5) +#define AUD_FIFO_FUNC_EN_N BIT(4) +#define AUD_FUNC_EN_N BIT(3) +#define HDCP_FUNC_EN_N BIT(2) +#define SW_FUNC_EN_N BIT(0) + +#define FUNC_EN_2 0x1C +#define SSC_FUNC_EN_N BIT(7) +#define AUX_FUNC_EN_N BIT(2) +#define SERDES_FIFO_FUNC_EN_N BIT(1) +#define LS_CLK_DOMAIN_FUNC_EN_N BIT(0) + +#define VIDEO_CTL_1 0x20 +#define VIDEO_EN BIT(7) +#define VIDEO_MUTE BIT(6) + +#define VIDEO_CTL_2 0x24 +#define IN_D_RANGE_MASK (0x1 << 7) +#define IN_D_RANGE_SHIFT (7) +#define IN_D_RANGE_CEA (0x1 << 7) +#define IN_D_RANGE_VESA (0x0 << 7) +#define IN_BPC_MASK (0x7 << 4) +#define IN_BPC_SHIFT (4) +#define IN_BPC_12_BITS (0x3 << 4) +#define IN_BPC_10_BITS (0x2 << 4) +#define IN_BPC_8_BITS (0x1 << 4) +#define IN_BPC_6_BITS (0x0 << 4) +#define IN_COLOR_F_MASK (0x3 << 0) +#define IN_COLOR_F_SHIFT (0) +#define IN_COLOR_F_YCBCR444 (0x2 << 0) +#define IN_COLOR_F_YCBCR422 (0x1 << 0) +#define IN_COLOR_F_RGB (0x0 << 0) + +#define VIDEO_CTL_3 0x28 +#define IN_YC_COEFFI_MASK (0x1 << 7) +#define IN_YC_COEFFI_SHIFT (7) +#define IN_YC_COEFFI_ITU709 (0x1 << 7) +#define IN_YC_COEFFI_ITU601 (0x0 << 7) +#define VID_CHK_UPDATE_TYPE_MASK (0x1 << 4) +#define VID_CHK_UPDATE_TYPE_SHIFT (4) +#define VID_CHK_UPDATE_TYPE_1 (0x1 << 4) +#define VID_CHK_UPDATE_TYPE_0 (0x0 << 4) + +#define VIDEO_CTL_4 0x2c +#define BIST_EN (0x1 << 3) +#define BIST_WH_64 (0x1 << 2) +#define BIST_WH_32 (0x0 << 2) +#define BIST_TYPE_COLR_BAR (0x0 << 0) +#define BIST_TYPE_GRAY_BAR (0x1 << 0) +#define BIST_TYPE_MOBILE_BAR (0x2 << 0) + +#define VIDEO_CTL_8 0x3C +#define VID_HRES_TH(x) (((x) & 0xf) << 4) +#define VID_VRES_TH(x) (((x) & 0xf) << 0) + +#define VIDEO_CTL_10 0x44 +#define F_SEL (0x1 << 4) +#define INTERACE_SCAN_CFG (0x1 << 2) +#define VSYNC_POLARITY_CFG (0x1 << 1) +#define HSYNC_POLARITY_CFG (0x1 << 0) + +#define TOTAL_LINE_CFG_L 0x48 +#define TOTAL_LINE_CFG_H 0x4c +#define ATV_LINE_CFG_L 0x50 +#define ATV_LINE_CFG_H 0x54 +#define VF_PORCH_REG 0x58 +#define VSYNC_CFG_REG 0x5c +#define VB_PORCH_REG 0x60 +#define TOTAL_PIXELL_REG 0x64 +#define TOTAL_PIXELH_REG 0x68 +#define ATV_PIXELL_REG 0x6c +#define ATV_PIXELH_REG 0x70 +#define HF_PORCHL_REG 0x74 +#define HF_PORCHH_REG 0x78 +#define HSYNC_CFGL_REG 0x7c +#define HSYNC_CFGH_REG 0x80 +#define HB_PORCHL_REG 0x84 +#define HB_PORCHH_REG 0x88 + + +#define SSC_REG 0x104 +#define TX_REG_COMMON 0x114 +#define DP_AUX 0x120 +#define DP_BIAS 0x124 + +#define PLL_REG_1 0xfc +#define REF_CLK_24M (0x1 << 1) +#define REF_CLK_27M (0x0 << 1) + +#define PLL_REG_2 0x9e4 +#define PLL_REG_3 0x9e8 +#define PLL_REG_4 0x9ec +#define PLL_REG_5 0xa00 +#define DP_PWRDN 0x12c +#define PD_INC_BG BIT(7) +#define PD_EXP_BG BIT(6) +#define PD_AUX BIT(5) +#define PD_PLL BIT(4) +#define PD_CH3 BIT(3) +#define PD_CH2 BIT(2) +#define PD_CH1 BIT(1) +#define PD_CH0 BIT(0) + +#define DP_RESERVE2 0x134 + +#define LANE_MAP 0x35C +#define LANE3_MAP_LOGIC_LANE_0 (0x0 << 6) +#define LANE3_MAP_LOGIC_LANE_1 (0x1 << 6) +#define LANE3_MAP_LOGIC_LANE_2 (0x2 << 6) +#define LANE3_MAP_LOGIC_LANE_3 (0x3 << 6) +#define LANE2_MAP_LOGIC_LANE_0 (0x0 << 4) +#define LANE2_MAP_LOGIC_LANE_1 (0x1 << 4) +#define LANE2_MAP_LOGIC_LANE_2 (0x2 << 4) +#define LANE2_MAP_LOGIC_LANE_3 (0x3 << 4) +#define LANE1_MAP_LOGIC_LANE_0 (0x0 << 2) +#define LANE1_MAP_LOGIC_LANE_1 (0x1 << 2) +#define LANE1_MAP_LOGIC_LANE_2 (0x2 << 2) +#define LANE1_MAP_LOGIC_LANE_3 (0x3 << 2) +#define LANE0_MAP_LOGIC_LANE_0 (0x0 << 0) +#define LANE0_MAP_LOGIC_LANE_1 (0x1 << 0) +#define LANE0_MAP_LOGIC_LANE_2 (0x2 << 0) +#define LANE0_MAP_LOGIC_LANE_3 (0x3 << 0) + +#define ANALOG_CTL_2 0x374 +#define SEL_24M (0x1 << 3) + +#define AUX_HW_RETRY_CTL 0x390 + +#define INT_STA 0x3c0 + +#define COMMON_INT_STA_1 0x3C4 +#define VSYNC_DET BIT(7) +#define PLL_LOCK_CHG BIT(6) +#define SPDIF_ERR BIT(5) +#define SPDIF_UNSTBL BIT(4) +#define VID_FORMAT_CHG BIT(3) +#define AUD_CLK_CHG BIT(2) +#define VID_CLK_CHG BIT(1) +#define SW_INT BIT(0) + +#define COMMON_INT_STA_2 0x3C8 +#define ENC_EN_CHG BIT(6) +#define HW_BKSV_RDY BIT(3) +#define HW_SHA_DONE BIT(2) +#define HW_AUTH_STATE_CHG BIT(1) +#define HW_AUTH_DONE BIT(0) + +#define COMMON_INT_STA_3 0x3CC +#define AFIFO_UNDER BIT(7) +#define AFIFO_OVER BIT(6) +#define R0_CHK_FLAG BIT(5) + +#define COMMON_INT_STA_4 0x3D0 +#define PSR_ACTIVE BIT(7) +#define PSR_INACTIVE BIT(6) +#define SPDIF_BI_PHASE_ERR BIT(5) +#define HOTPLUG_CHG BIT(2) +#define HPD_LOST BIT(1) +#define PLUG BIT(0) + +#define DP_INT_STA 0x3DC +#define INT_HPD BIT(6) +#define HW_LT_DONE BIT(5) +#define SINK_LOST BIT(3) +#define LINK_LOST BIT(2) +#define RPLY_RECEIV BIT(1) +#define AUX_ERR BIT(0) + +#define COMMON_INT_MASK_1 0x3E0 +#define COMMON_INT_MASK_2 0x3E4 +#define COMMON_INT_MASK_3 0x3E8 +#define COMMON_INT_MASK_4 0x3EC +#define DP_INT_STA_MASK 0x3F8 + +#define INT_CTL 0x3FC +#define SOFT_INT_CTRL BIT(2) +#define INT_POL BIT(0) + +#define SYS_CTL_1 0x600 +#define DET_STA BIT(2) +#define FORCE_DET BIT(1) +#define DET_CTRL BIT(0) + +#define SYS_CTL_2 0x604 +#define CHA_CRI(x) (((x) & 0xf) << 4) +#define CHA_STA BIT(2) +#define FORCE_CHA BIT(1) +#define CHA_CTRL BIT(0) + +#define SYS_CTL_3 0x608 +#define HPD_STATUS BIT(6) +#define F_HPD BIT(5) +#define HPD_CTRL BIT(4) +#define HDCP_RDY BIT(3) +#define STRM_VALID BIT(2) +#define F_VALID BIT(1) +#define VALID_CTRL BIT(0) + +#define SYS_CTL_4 0x60C +#define FIX_M_AUD BIT(4) +#define ENHANCED BIT(3) +#define FIX_M_VID BIT(2) +#define M_VID_UPDATE_CTRL BIT(0) + +#define PKT_SEND_CTL 0x640 +#define HDCP_CTL 0x648 + +#define LINK_BW_SET 0x680 +#define LANE_CNT_SET 0x684 + +#define TRAINING_PTN_SET 0x688 +#define SCRAMBLING_DISABLE (0x1 << 5) +#define SCRAMBLING_ENABLE (0x0 << 5) +#define LINK_QUAL_PATTERN_SET_MASK (0x7 << 2) +#define LINK_QUAL_PATTERN_SET_HBR2 (0x5 << 2) +#define LINK_QUAL_PATTERN_SET_80BIT (0x4 << 2) +#define LINK_QUAL_PATTERN_SET_PRBS7 (0x3 << 2) +#define LINK_QUAL_PATTERN_SET_D10_2 (0x1 << 2) +#define LINK_QUAL_PATTERN_SET_DISABLE (0x0 << 2) +#define SW_TRAINING_PATTERN_SET_MASK (0x3 << 0) +#define SW_TRAINING_PATTERN_SET_PTN2 (0x2 << 0) +#define SW_TRAINING_PATTERN_SET_PTN1 (0x1 << 0) +#define SW_TRAINING_PATTERN_SET_DISABLE (0x0 << 0) + +#define LN0_LINK_TRAINING_CTL 0x68C +#define LN1_LINK_TRAINING_CTL 0x690 +#define LN2_LINK_TRAINING_CTL 0x694 +#define LN3_LINK_TRAINING_CTL 0x698 + +#define HW_LT_CTL 0x6a0 +#define HW_LT_ERR_CODE_MASK 0x70 +#define HW_LT_EN BIT(0) + +#define DEBUG_CTL 0x6C0 +#define PLL_LOCK BIT(4) +#define F_PLL_LOCK BIT(3) +#define PLL_LOCK_CTRL BIT(2) +#define POLL_EN BIT(1) +#define PN_INV BIT(0) + +#define HPD_DEGLITCH_L 0x6C4 +#define HPD_DEGLITCH_H 0x6C8 +#define LINK_DEBUG_CTL 0x6E0 + +#define M_VID_0 0x700 +#define M_VID_1 0x704 +#define M_VID_2 0x708 +#define N_VID_0 0x70C +#define N_VID_1 0x710 +#define N_VID_2 0x714 + +#define VIDEO_FIFO_THRD 0x730 +#define AUDIO_MARGIN 0x73C + +#define M_VID_GEN_FILTER_TH 0x764 +#define M_AUD_GEN_FILTER_TH 0x778 + +#define AUX_CH_STA 0x780 +#define AUX_BUSY (0x1 << 4) +#define AUX_STATUS_MASK (0xf << 0) + +#define AUX_CH_DEFER_CTL 0x788 +#define DEFER_CTRL_EN (0x1 << 7) +#define DEFER_COUNT(x) (((x) & 0x7f) << 0) + +#define AUX_RX_COMM_I2C_DEFER (0x2 << 2) +#define AUX_RX_COMM_AUX_DEFER (0x2 << 0) + +#define AUX_RX_COMM 0x78C +#define BUFFER_DATA_CTL 0x790 +#define BUF_CLR (0x1 << 7) +#define BUF_HAVE_DATA (0x1 << 4) +#define BUF_DATA_COUNT(x) (((x) & 0xf) << 0) + +#define AUX_CH_CTL_1 0x794 +#define AUX_LENGTH(x) (((x - 1) & 0xf) << 4) +#define AUX_TX_COMM_MASK (0xf << 0) +#define AUX_TX_COMM_DP_TRANSACTION (0x1 << 3) +#define AUX_TX_COMM_I2C_TRANSACTION (0x0 << 3) +#define AUX_TX_COMM_MOT (0x1 << 2) +#define AUX_TX_COMM_WRITE (0x0 << 0) +#define AUX_TX_COMM_READ (0x1 << 0) + +#define DP_AUX_ADDR_7_0 0x798 +#define DP_AUX_ADDR_15_8 0x79C +#define DP_AUX_ADDR_19_16 0x7A0 + +#define AUX_CH_CTL_2 0x7A4 +#define PD_AUX_IDLE BIT(3) +#define ADDR_ONLY BIT(1) +#define AUX_EN BIT(0) + +#define BUF_DATA_0 0x7C0 + +#define SOC_GENERAL_CTL 0x800 + +/* TX_SW_RESET */ +#define RST_DP_TX BIT(0) + +/* ANALOG_CTL_1 */ +#define TX_TERMINAL_CTRL_50_OHM BIT(4) + +/* ANALOG_CTL_3 */ +#define DRIVE_DVDD_BIT_1_0625V (0x4 << 5) +#define VCO_BIT_600_MICRO (0x5 << 0) + +/* PLL_FILTER_CTL_1 */ +#define PD_RING_OSC (0x1 << 6) +#define AUX_TERMINAL_CTRL_37_5_OHM (0x0 << 4) +#define AUX_TERMINAL_CTRL_45_OHM (0x1 << 4) +#define AUX_TERMINAL_CTRL_50_OHM (0x2 << 4) +#define AUX_TERMINAL_CTRL_65_OHM (0x3 << 4) +#define TX_CUR1_2X (0x1 << 2) +#define TX_CUR_16_MA (0x3 << 0) + +/* TX_AMP_TUNING_CTL */ +#define CH3_AMP_SHIFT (24) +#define CH3_AMP_400_MV (0x0 << 24) +#define CH2_AMP_SHIFT (16) +#define CH2_AMP_400_MV (0x0 << 16) +#define CH1_AMP_SHIFT (8) +#define CH1_AMP_400_MV (0x0 << 8) +#define CH0_AMP_SHIFT (0) +#define CH0_AMP_400_MV (0x0 << 0) + +/* AUX_HW_RETRY_CTL */ +#define AUX_BIT_PERIOD_EXPECTED_DELAY(x) (((x) & 0x7) << 8) +#define AUX_HW_RETRY_INTERVAL_MASK (0x3 << 3) +#define AUX_HW_RETRY_INTERVAL_600_MICROSECONDS (0x0 << 3) +#define AUX_HW_RETRY_INTERVAL_800_MICROSECONDS (0x1 << 3) +#define AUX_HW_RETRY_INTERVAL_1000_MICROSECONDS (0x2 << 3) +#define AUX_HW_RETRY_INTERVAL_1800_MICROSECONDS (0x3 << 3) +#define AUX_HW_RETRY_COUNT_SEL(x) (((x) & 0x7) << 0) + +/* LN0_LINK_TRAINING_CTL */ +#define PRE_EMPHASIS_SET_MASK (0x3 << 3) +#define PRE_EMPHASIS_SET_SHIFT (3) + +/* PLL_CTL */ +#define DP_PLL_PD (0x1 << 7) +#define DP_PLL_RESET (0x1 << 6) +#define DP_PLL_LOOP_BIT_DEFAULT (0x1 << 4) +#define DP_PLL_REF_BIT_1_1250V (0x5 << 0) +#define DP_PLL_REF_BIT_1_2500V (0x7 << 0) + +/* PHY_TEST */ +#define MACRO_RST BIT(5) +#define CH1_TEST BIT(1) +#define CH0_TEST BIT(0) + +#define AUX_ADDR_7_0(x) (((x) >> 0) & 0xff) +#define AUX_ADDR_15_8(x) (((x) >> 8) & 0xff) +#define AUX_ADDR_19_16(x) (((x) >> 16) & 0x0f) + +#endif diff --git a/drivers/gpu/drm/rockchip/rockchip_drm_drv.c b/drivers/gpu/drm/rockchip/rockchip_drm_drv.c index 59187aa..4f1205f 100644 --- a/drivers/gpu/drm/rockchip/rockchip_drm_drv.c +++ b/drivers/gpu/drm/rockchip/rockchip_drm_drv.c @@ -564,6 +564,12 @@ static int rockchip_drm_init(void) goto out_lvds; #endif +#ifdef CONFIG_RK3288_DP + ret = platform_driver_register(&rk3288_edp_driver); + if (ret) + goto out_edp; +#endif + rockchip_drm_pdev = platform_device_register_simple("rockchip-drm", -1, NULL, 0); if (IS_ERR(rockchip_drm_pdev)) { @@ -580,6 +586,10 @@ static int rockchip_drm_init(void) out_drm_driver: platform_device_unregister(rockchip_drm_pdev); out_drm_pdev: +#ifdef CONFIG_RK3288_DP + platform_driver_unregister(&rk3288_edp_driver); +out_edp: +#endif #ifdef CONFIG_RK3288_LVDS platform_driver_unregister(&rk3288_lvds_driver); out_lvds: @@ -596,6 +606,9 @@ static void rockchip_drm_exit(void) { platform_device_unregister(rockchip_drm_pdev); platform_driver_unregister(&rockchip_drm_platform_driver); +#ifdef CONFIG_RK3288_DP + platform_driver_unregister(&rk3288_edp_driver); +#endif #ifdef CONFIG_RK3288_LVDS platform_driver_unregister(&rk3288_lvds_driver); #endif diff --git a/drivers/gpu/drm/rockchip/rockchip_drm_drv.h b/drivers/gpu/drm/rockchip/rockchip_drm_drv.h index d28f4dc..565276e 100644 --- a/drivers/gpu/drm/rockchip/rockchip_drm_drv.h +++ b/drivers/gpu/drm/rockchip/rockchip_drm_drv.h @@ -128,4 +128,7 @@ extern struct platform_driver rockchip_lcdc_platform_driver; #ifdef CONFIG_RK3288_LVDS extern struct platform_driver rk3288_lvds_driver; #endif +#ifdef CONFIG_RK3288_DP +extern struct platform_driver rk3288_edp_driver; +#endif #endif /* _ROCKCHIP_DRM_DRV_H_ */ -- 1.7.9.5