On 7/24/05, Torbjörn Söderstedt <[EMAIL PROTECTED]> wrote: > Hello, > > I tried the driver on my X300SE PCI-E card, but when I start the X > server all I get is a black screen. To make the driver recognise my card > at all, I added it to the pciids as a rv350 card (although it really > should be rv370). > > Kernel and Xorg logs are attached. Because I don't have much kernel > hacking experience, I don't really know where to start. I'm prepared to > devote some time for this, so please tell me what I can do to help. >
PCIE is not currently working. So for the moment, PCIE cards will not work. What you can try is setting up the card with the fglrx driver and getting that working then use the radeon register dump scripts in r300 cvs to dump the PCIE config and then compare that to how the regs get set up in the open drm. Alex > > 0000:02:00.0 VGA compatible controller: ATI Technologies Inc: Unknown > device 5b60 (prog-if 00 [VGA]) > Subsystem: C.P. Technology Co. Ltd: Unknown device 2089 > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- > ParErr- Stepping- SERR- FastB2B- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- > <TAbort- <MAbort- >SERR- <PERR- > Latency: 0, Cache Line Size: 0x08 (32 bytes) > Interrupt: pin A routed to IRQ 11 > Region 0: Memory at d0000000 (32-bit, prefetchable) [size=128M] > Region 1: I/O ports at be00 [size=256] > Region 2: Memory at df8f0000 (32-bit, non-prefetchable) [size=64K] > Capabilities: [50] Power Management version 2 > Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA > PME(D0-,D1-,D2-,D3hot-,D3cold-) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > Capabilities: [58] #10 [0001] > Capabilities: [80] Message Signalled Interrupts: 64bit+ > Queue=0/0 Enable- > Address: 0000000000000000 Data: 0000 > > 0000:02:00.1 Display controller: ATI Technologies Inc: Unknown device 5b70 > Subsystem: C.P. Technology Co. Ltd: Unknown device 2088 > Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- > ParErr- Stepping- SERR- FastB2B- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- > <TAbort- <MAbort- >SERR- <PERR- > Region 0: Memory at df8e0000 (32-bit, non-prefetchable) > [disabled] [size=64K] > Capabilities: [50] Power Management version 2 > Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA > PME(D0-,D1-,D2-,D3hot-,D3cold-) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > Capabilities: [58] #10 [0001] > > AMD64 Ubuntu Hoary > Linux 2.6.10 > > Regards, > Torbjörn Söderstedt > > > > ------------------------------------------------------- SF.Net email is sponsored by: Discover Easy Linux Migration Strategies from IBM. Find simple to follow Roadmaps, straightforward articles, informative Webcasts and more! Get everything you need to get up to speed, fast. http://ads.osdn.com/?ad_idt77&alloc_id492&op=click -- _______________________________________________ Dri-devel mailing list Dri-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/dri-devel