----- Original Message ----- >Date: Sun, 5 Oct 2008 20:27:22 +0900 (JST) >From: Masa Murayama <[EMAIL PROTECTED]> >To: "Alex Lam S.L." <[EMAIL PROTECTED]> >Subject: Re: Re: [driver-discuss] Atheros L1 GbE on P5E-VM HDMI >Cc: Masa Murayama <[EMAIL PROTECTED]>, [email protected] > > >----- Original Message ----- >>Date: Sun, 5 Oct 2008 00:38:48 +0100 >>From: "Alex Lam S.L." <[EMAIL PROTECTED]> >>To: "Masa Murayama" <[EMAIL PROTECTED]> >>Subject: Re: [driver-discuss] Atheros L1 GbE on P5E-VM HDMI >> >> >>Just to say that I have not disappeared - but have been waiting for a >>part of my server to return from RMA. I am now expecting it to be up >>and running on Monday (6th Oct), so I will start testing again with >>your new driver. >> >>Sorry for the wait. >> > >Alex, > >Thank you for updating me. >Today I posted the latest atge driver, atge-2.6.1 into my page. >atge-2.6.1 passed all tests in nicdrv, which was provided by >solaris nic-team in Sun. >First, please try it without any workarounds. > >-masa
Alax, I think I found the root cause of corrupted received packets. The atge driver 2.6.1 has a bug that it cannot deal with higher address than 32bit. As your box has 8 giga byte of main memory, received packets will not be stored into the correct buffers. Please try new atge below if you have time. http://homepage2.nifty.com/mrym3/taiyodo/atge-2.6.2t3.tar.gz -masa >> >> >>On Wed, Sep 24, 2008 at 11:01 PM, Masa Murayama <[EMAIL PROTECTED]> wrote : >>> ----- Original Message ----- >>>>Date: Wed, 24 Sep 2008 05:56:23 +0900 (JST) >>>>From: Masa Murayama <[EMAIL PROTECTED]> >>>>To: "Alex Lam S.L." <[EMAIL PROTECTED]> >>>>Subject: Re: [driver-discuss] Atheros L1 GbE on P5E-VM HDMI >>>>Cc: Masa Murayama <[EMAIL PROTECTED]>, [email protected] >>>> >>>> >>>>----- Original Message ----- >>>>>Date: Tue, 23 Sep 2008 19:00:12 +0100 >>>>>From: "Alex Lam S.L." <[EMAIL PROTECTED]> >>>>>To: "Masa Murayama" <[EMAIL PROTECTED]> >>>>>Subject: Re: Re: [driver-discuss] Atheros L1 GbE on P5E-VM HDMI >>>>>Cc: [email protected] >>>>> >>>>> >>>>>Seems like atge manages to read the MAC from config, but only after >>>>>reading it from ROM: >>>>> >>>>>atge: [ID 688919 kern.info] atge0: atge_read_mac_addr: reading flash >>>>>rom: not supported >>>>>atge: [ID 451511 kern.info] atge0: MII PHY (0x004dd015) found at 0 >>>>>atge: [ID 426109 kern.info] atge0: PHY >>>>>control:1140<ANE,FDUPLEX,1000M>, >>>>>status:7949<100_BASEX_FD,100_BASEX,10_BASE_FD,10_BASE,XSTATUS,MFPRMBLSUPR , >CA >>> N >>>>AUTONEG,EXTENDED>, >>>>>advert:de1<ASM_DIR,PAUSE,100BASE_TX_FD,100BASE_TX,10BASE_T_FD,10BASE_T>, >>>>>lpar:0 >>>>>atge: [ID 119377 kern.info] atge0: xstatus:2000<1000BASET_FD> >>>>>genunix: [ID 678236 kern.info] Ethernet address = 2:0:0:0:0:1 >>>>>gld: [ID 944156 kern.info] atge0: atheros L1 nic driver v2.6.0: type >>>>>"ether" mac address 02:00:00:00:00:01 >>>>> >>>>>Any other things that could have gone wrong? >>>> >>>>Sorry for delay. >>>>Now mac address is no problem, because it isn't 00:00:00:00:00:00 nor >>>>ff:ff:ff:ff:ff:ff. >>>> >>>>I found all received packets were recognized as *unknown* in kstat log. >>>>They should be corrupted, I think. Although I don't know the >>>>reason, I'll send the latest atge under testing later. Try it. >>> >>> Alex, >>> >>> I posted the latest snapshot of atge. Please try it. >>> >>> http://homepage2.nifty.com/mrym3/taiyodo/atge-2.6.1t6.tar.gz >>> >>> -masa >>> >>>>If you have time, please test following on current atge. I'd like see >>>> >>>> In one window, kick snoop. >>>> # snoop -d atge0 -V (if you send the log to me, please capture the >>>> raw packets in binary format by snoop -d atge0 -o log-file) >>>> >>>> In another window. try ping or telnet >>>> # ping OTHER-HOST >>>> >>>>-masa >>>> >>>>>Regards, >>>>>Alex. >>>>> >>>>>On Sat, Sep 20, 2008 at 7:39 PM, Alex Lam S.L. <[EMAIL PROTECTED]> wrot e >: >>>>>> Hi there, >>>>>> >>>>>> Just to clarify - I've forgotten to plug in the ethernet cable at one >>>>>> point and was panicking why there's a big red cross on atge0. So don't >>>>>> get too worked up about that part of the logs. >>>>>> >>>>>> But otherwise it seems to have identical behaviour as before. I'm >>>>>> testing on snv_98. >>>>>> >>>>>> Regards, >>>>>> Alex. >>>>>> >>>>>> >>>>>> On Sat, Sep 20, 2008 at 7:35 PM, Alex Lam S.L. <[EMAIL PROTECTED]> wr o >te >>> : >>>>>>> Hi there, >>>>>>> >>>>>>> No luck still - logs attached. Should I try a more "real" MAC address >>>>>>> to see if it makes a difference? >>>>>>> >>>>>>> Regards, >>>>>>> Alex. >>>>>>> >>>>>>> >>>>>>> >>>>>>> On Wed, Sep 17, 2008 at 7:05 PM, Masa Murayama <[EMAIL PROTECTED]> w >ro >>> t >>>>e: >>>>>>>> ----- Original Message ----- >>>>>>>>>Date: Wed, 17 Sep 2008 01:47:25 +0100 >>>>>>>>>From: "Alex Lam S.L." <[EMAIL PROTECTED]> >>>>>>>>>To: "Masa Murayama" <[EMAIL PROTECTED]> >>>>>>>>>Subject: Re: [driver-discuss] Atheros L1 GbE on P5E-VM HDMI >>>>>>>>>Cc: [email protected] >>>>>>>>> >>>>>>>>> >>>>>>>>>Hi there, >>>>>>>>> >>>>>>>>>Attached is the requested information, plus "scanpci" which I have >>>>>>>>>done for a defect report on OS tracker as well. >>>>>>>>> >>>>>>>>>Hope this helps, >>>>>>>>>Alex. >>>>>>>> >>>>>>>> Alex, >>>>>>>> >>>>>>>> Thank you very much for sending the logs. >>>>>>>> I think I found a problem. Current atge doesn't support to reading >>>>>>>> factory mac address from flash roms. But the L1 chipset in your board >>>>>>>> uses a flash rom for storing mac address. >>>>>>>> >>>>>>>>> Sep 16 18:33:50 opensolaris atge: [ID 198270 kern.info] atge0: atge _ >at >>> t >>>>ach_ >>>>>>>> chip: called at time:43557 >>>>>>>>> Sep 16 18:33:50 opensolaris atge: [ID 688919 kern.info] atge0: atge_ r >ea >>> d >>>>_mac >>>>>>>> _addr: reading flash rom: not supported >>>>>>>>>Sep 16 18:33:50 opensolaris atge: [ID 451511 kern.info] atge0: MII PH Y > ( >>> 0 >>>>x004 >>>>>>>> dd015) found at 0 >>>>>>>> >>>>>>>> For a workaround, would you add following line into /kernel/drv/atge. c >on >>> f >>>>>>>> then reboot your system. >>>>>>>> >>>>>>>> mac-addr="02:00:00:00:00:01"; >>>>>>>> >>>>>>>> -masa >>>>>>>>> >>>>>>>>> >>>>>>>>>On Tue, Sep 16, 2008 at 10:38 PM, Masa Murayama <[EMAIL PROTECTED] > > w >>> r >>>>ote: >>>>>>>>>> ----- Original Message ----- >>>>>>>>>>>Date: Tue, 16 Sep 2008 00:15:23 +0100 >>>>>>>>>>>From: "Alex Lam S.L." <[EMAIL PROTECTED]> >>>>>>>>>>>To: [email protected] >>>>>>>>>>>Subject: [driver-discuss] Atheros L1 GbE on P5E-VM HDMI >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>>Hi there, >>>>>>>>>>> >>>>>>>>>>>I have been browsing the web for this. I have tried the driver prov i >de >>> d >>>> on: >>>>>>>>>>> >>>>>>>>>>>http://homepage2.nifty.com/mrym3/taiyodo/eng/ >>>>>>>>>>> >>>>>>>>>>>But even though the device seems to set up properly and I can see i t >>>>>>>>>>>properly in Device Utility and even some packets sent / received, i t >>>>>>>>>>>does not work under any DHCP / static IP setup, whether using NWAM o >r >>>>>>>>>>>not. >>>>>>>>>>> >>>>>>>>>>>(Nonetheless, very kind of you. Thank you!) >>>>>>>>>>> >>>>>>>>>>>Any pointers as to what I can do next? >>>>>>>>>> >>>>>>>>>> Thank you very much for testing atge drver. Would you show followin g > t >>> o >>>> me? >>>>>>>>>> >>>>>>>>>> (1) message lines from atge driver in /var/adm/messages >>>>>>>>>> >>>>>>>>>> (2) output of ifconfig -a. I prefer statis IP rather than DHCP. >>>>>>>>>> >>>>>>>>>> (3)output of "kstat atge" and "netstat -s" after you tested ping >>>>>>>>>> or telnet to other network node in the same ethernet segment. >>>>>>>>>> >>>>>>>>>> -masa >>>>>>>>>> >>>>>>>>>> >>>>>>>>>>>Regards, >>>>>>>>>>>Alex. >>>>>>>>>>>_______________________________________________ >>>>>>>>>>>driver-discuss mailing list >>>>>>>>>>>[email protected] >>>>>>>>>>>http://mail.opensolaris.org/mailman/listinfo/driver-discuss >>>>>>>>>> >>>>>>>>>> >>>>>>>> >>>>>>>> >>>>>>> >>>>>> >>>> >>> >>> _______________________________________________ driver-discuss mailing list [email protected] http://mail.opensolaris.org/mailman/listinfo/driver-discuss
