Seventh of the patches that fixes the lines over 80 characters in reg.c
Signed-off-by: Iker Pedrosa <ikerpedro...@gmail.com>
---
drivers/staging/winbond/reg.c | 24 ++++++++++++++++--------
1 file changed, 16 insertions(+), 8 deletions(-)
diff --git a/drivers/staging/winbond/reg.c b/drivers/staging/winbond/reg.c
index e51530e..3b19da8 100644
--- a/drivers/staging/winbond/reg.c
+++ b/drivers/staging/winbond/reg.c
@@ -2060,7 +2060,8 @@ u8 RFSynthesizer_SetWinbond242Power(struct hw_data
*pHwData, u8 index)
i--;
/* Set TxVga into RF */
- PowerData = (1 << 31) | (0 << 30) | (24 << 24) |
BitReverse(w89rf242_txvga_data[i][0], 24);
+ PowerData = (1 << 31) | (0 << 30) | (24 << 24)
+ | BitReverse(w89rf242_txvga_data[i][0], 24);
Wb35Reg_Write(pHwData, 0x0864, PowerData);
/* Update BB48 BB4C BB58 for high precision txvga */
@@ -2136,11 +2137,15 @@ void Mxx_initial(struct hw_data *pHwData)
pltmp[4] = tmp;
/* M38 */
- reg->M38_MacControl = (DEFAULT_RATE_RETRY_LIMIT << 8) |
(DEFAULT_LONG_RETRY_LIMIT << 4) | DEFAULT_SHORT_RETRY_LIMIT;
+ reg->M38_MacControl = (DEFAULT_RATE_RETRY_LIMIT << 8) |
+ (DEFAULT_LONG_RETRY_LIMIT << 4) |
+ DEFAULT_SHORT_RETRY_LIMIT;
pltmp[5] = reg->M38_MacControl;
/* M3C */
- tmp = (DEFAULT_PIFST << 26) | (DEFAULT_EIFST << 16) | (DEFAULT_DIFST <<
8) | (DEFAULT_SIFST << 4) | DEFAULT_OSIFST;
+ tmp = (DEFAULT_PIFST << 26) | (DEFAULT_EIFST << 16) |
+ (DEFAULT_DIFST << 8) | (DEFAULT_SIFST << 4) |
+ DEFAULT_OSIFST;
reg->M3C_MacControl = tmp;
pltmp[6] = tmp;
@@ -2163,7 +2168,9 @@ void Mxx_initial(struct hw_data *pHwData)
pltmp[9] = tmp;
/* M4C */
- reg->M4C_MacStatus = (DEFAULT_PROTOCOL_VERSION << 30) |
(DEFAULT_MAC_POWER_STATE << 28) | (DEFAULT_DTIM_ALERT_TIME << 24);
+ reg->M4C_MacStatus = (DEFAULT_PROTOCOL_VERSION << 30) |
+ (DEFAULT_MAC_POWER_STATE << 28) |
+ (DEFAULT_DTIM_ALERT_TIME << 24);
pltmp[10] = reg->M4C_MacStatus;
for (i = 0; i < 11; i++)
@@ -2235,10 +2242,11 @@ void GetTxVgaFromEEPROM(struct hw_data *pHwData)
}
/*
- * This function will affect the TxVga parameter in HAL. If
hal_set_current_channel
- * or RFSynthesizer_SetPowerIndex be called, new TxVga will take effect.
- * TxVgaSettingInEEPROM of sHwData is an u8 array point to EEPROM contain for
IS89C35
- * This function will use default TxVgaSettingInEEPROM data to calculate new
TxVga.
+ * This function will affect the TxVga parameter in HAL. If
+ * hal_set_current_channel or RFSynthesizer_SetPowerIndex be called, new TxVga
+ * will take effect. TxVgaSettingInEEPROM of sHwData is an u8 array point to
+ * EEPROM contain for IS89C35. This function will use default
+ * TxVgaSettingInEEPROM data to calculate new TxVga.
*/
void EEPROMTxVgaAdjust(struct hw_data *pHwData)
{
--
1.8.1.2
_______________________________________________
devel mailing list
de...@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
