I know that I am getting power because I can hear the speaker click and give faint white noise when I hit the external KB power button. Couldn't make note of that till partial dissassembly so that I could put the little speaker right up to my ear.
Right now I cannot get the logic board out. I thought I got all of the middle and perimeter screws out (even the one under the little white ribbon cable up top. Do I have to loosen or remove that large metal bar at the case top? Every time I pry at the logic board the whole inside assembly with HD and frame comes up too. Plus, I am not sure if the PRAM battery is disconnected yet. Is that the red and black lead that is attached to the left side of the LB? I am not a technically minded sort. Solder is out of the question for me as I am too shaky with the iron. Just doing this partial dismantle has frazzled me good. Scott ---------- Duo/2400 List, The friendliest place on the Net! A listserv for users and fans of Mac subportables. FAQ at <http://www.themacintoshguy.com/lists/DuoListFAQ.shtml> Be sure to visit Mac2400! <http://www.sineware.com/mac2400> To unsubscribe, E-mail to: <[EMAIL PROTECTED]> To switch to the DIGEST mode, E-mail to <[EMAIL PROTECTED]> Need help from a real person? Try. <[EMAIL PROTECTED]> ---------- Dr. Bott | 10/100 Ethernet for your 2400 is finally here! MPC-100 | <http://www.drbott.com/prod/mpc100.html> RoadTools $30 PodiumPad available at Apple retail stores, $20 Traveler CoolPad at Staples. Both in white for iBooks at <http://roadtools.com> Midwest Mac Parts ][ <http://www.midwestmac.com> After-market parts for Macs. ][ 888-356-1104 ][ MacResQ Specials: LaCie SCSI CDR From $99! PowerBook 3400/200 Only $879! Norton AntiVirus 6 Only $19! We Stock PARTS! <http://www.macresq.com>
