Open the mixer program and see if the line-in port is muted. Or, perhaps you just have to increase the volume level for the line-in port on the mixer. Of course, there are a lot of other possibilities as well!
K8AC Floyd Sense in Angier, NC ----- Original Message ----- From: "Rick Stoneking" <[EMAIL PROTECTED]> To: <dx4win@mailman.qth.net> Sent: Monday, November 18, 2002 12:32 PM Subject: [Dx4win] Soundcard questions > Sorry if this is a bit off topic. > > I have been trying to get my radio (TS-950SD) setup to use RTTY/PSK31 and I > have made the cable to go from the connector on the back of the radio to > the soundcard. I plugged the cable into the line in jack on the sound card > and could not get anything to work. I found that if I plugged the cable > into the mic input everything is fine - with the exception of the fact that > I now no longer have a microphone plugged into the computer - which I do > use for other things. The computer is a several year old Micron 230MHz > Pentium machine with the soundcard integrated on the motherboard. > > Thanks, > Rick > W2RDS > > _______________________________________________ > Dx4win mailing list > Dx4win@mailman.qth.net > http://mailman.qth.net/mailman/listinfo/dx4win >
