Please reply to Paul or the reflector, *not* AD1C !

Date: Mon, 01 Aug 2005 20:00:47 +0200
From: F6EXV <[EMAIL PROTECTED]>
To: Jim Reisert AD1C <[EMAIL PROTECTED]>
Subject: Labels

I cannot seam to be able to properly design my label...
What are the exact definitions of vertical pitch, vertical spacing and 
vertical shift ?
My labels on paper are designed this way :
About 3mm before the first label starts. Label height is 37.3mm. The 
labels are next to each other (no space between labels). About 3mm after 
the end of last label and end of page.
I just cannot design it properly so that the printed text will start at 
the same height of each label...
Any help will be appreciated.
73
F6EXV


--
Jim Reisert AD1C, 7 Charlemont Court, North Chelmsford, MA 01863
USA +978-251-9933, <[EMAIL PROTECTED]>, http://www.ad1c.us
From [EMAIL PROTECTED]  Tue Aug  2 00:58:21 2005
From: [EMAIL PROTECTED] (Paul van der Eijk)
Date: Tue Aug  2 00:59:29 2005
Subject: [Dx4win] Labels
In-Reply-To: <[EMAIL PROTECTED]>
References: <[EMAIL PROTECTED]>
Message-ID: <[EMAIL PROTECTED]>

Paul,

Press the F1 key when the label editor is open; all the terms are
defined in the on-line help.

Keep in mind that when you specify the label layout, the actual printer
you use for printing plays a role too. Many printers cannot print all the way
to the left on a page and start printing lower on the page (the paper margins).
These margins are different for different printer models. When you use 
the preview for a layout you should get a good idea what the final print will
look like without wasting paper.

--Paul


At 02:35 PM 8/1/2005, Jim Reisert AD1C wrote:
>Please reply to Paul or the reflector, *not* AD1C !
>
>Date: Mon, 01 Aug 2005 20:00:47 +0200
>From: F6EXV <[EMAIL PROTECTED]>
>To: Jim Reisert AD1C <[EMAIL PROTECTED]>
>Subject: Labels
>
>I cannot seam to be able to properly design my label...
>What are the exact definitions of vertical pitch, vertical spacing and 
>vertical shift ?
>My labels on paper are designed this way :
>About 3mm before the first label starts. Label height is 37.3mm. The 
>labels are next to each other (no space between labels). About 3mm after 
>the end of last label and end of page.
>I just cannot design it properly so that the printed text will start at 
>the same height of each label...
>Any help will be appreciated.
>73
>F6EXV
>
>
>--
>Jim Reisert AD1C, 7 Charlemont Court, North Chelmsford, MA 01863
>USA +978-251-9933, <[EMAIL PROTECTED]>, http://www.ad1c.us
>_______________________________________________
>Dx4win mailing list
>Dx4win@mailman.qth.net
>http://mailman.qth.net/mailman/listinfo/dx4win 

~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Paul van der Eijk (KK4HD)
[EMAIL PROTECTED]
http://www.dx4win.com

Reply via email to