My message looked OK when I hit send. Somehow the wrap and spacing got screwed up on it's arrival to the reflector and so did not show what I wanted to present.
Let me try again and hope the wrapping and spacing come thru OK this time. ----- Original Message ----- From: "Alan Zack" <[EMAIL PROTECTED]> To: "Karl Oyster, K1KO" <[EMAIL PROTECTED]>; "DX4WIN" <Dx4win@mailman.qth.net> Sent: Tuesday, February 12, 2008 6:25 PM Subject: Re: [Dx4win] Print Labels > Before I actually print my labels I select DESTINATION: PREVIEW to > look at my labels print page and make sure all elements of an address > fits inside the label window. I note the calls of any whose address > extends out of the label's space. For those that don't fit I close > the PRINT LABEL window and go to those QSL's that need fixing. In the > main QSO window I click on the QSL Mgr box and hit CTL+E. This opens > the QSL Mgr address window. I then edit this window to make the > persons address fit better. > In your example of G3TXF if you cut and paste his address from QRZ.COM you get: Nigel CAWTHORNE, G3TXF FALCONS, ST GEORGE'S AVENUE, WEYBRIDGE SURREY KT13 0BS, England - U.K. The word WEYBRIDGE causes the label to be printed out of bounds. I then edit it to read: Nigel CAWTHORNE, G3TXF FALCONS, ST GEORGE'S AVE, WEYBRIDGE SURREY KT13 0BS, U.K. I shorten AVENUE to AVE and move WEYBRIDGE to a new line. Now Nigel's address will fit inside the label box just fine. If you are dealing with a really big address and this method doesn't work then try going to a smaller font. GL & 73 ______________________________________________________ Alan Zack Amateur Radio Station K7ACZ Official USCG Auxiliary Comm Station Las Vegas, Nevada, USA Delta Rocket Quality Engineer, The Boeing Company, Retired Aviation Chief Warrant Officer, U.S. Coast Guard, Retired > ----- Original Message ----- > From: "Karl Oyster, K1KO" <[EMAIL PROTECTED]> > To: "DX4WIN" <Dx4win@mailman.qth.net> > Sent: Monday, February 11, 2008 5:55 PM > Subject: [Dx4win] Print Labels > > >> Hi Guys... >> >> Anybody know how to avoid having addresses on "Manager Address" >> labels avoid printing onto the next label to the right side when the >> address is quite involved. Good example: Nigel Cawthorne, G3TXF, has >> about four or five bits and pieces of address and they cause the >> printing to move off the right side of the label. The fact that all >> the words aren't on the right label is only minimally problematic; >> the real problem is that those words wind up on the label to the >> right, rendering it illegible. >> >> I'd appreciate any info you might have about this. >> >> Thanks, in advance, >> >> Karl, K1KO >> Virginia Beach
