Jim, That portion of the table is part of the on-line help; see "address of radio" or "ICOM radio"
--Paul, KK4HD Jim Reisert AD1C wrote: > Please see this post: > > http://lists.contesting.com/_writelog/2009-06/msg00081.html > > It says: > > "But for the IC-706 there are three models, each with its own hex code > as follows: > > IC-706 48h > IC-706MKII 4Eh > IC-706MKIIG 58h > " > > The radio address (programmed into your ICOM) should have been 58h, it > sounds like the radio was re-programmed. DX4WIN has only *ONE* hex > address code for the entire IC-706 line (48h), which sounds like it > could be improved. > > 73 - Jim AD1C > > p.s. you can copy pskcore.dll from the 8.04 directory to the 7.06 directory > > On Wed, Jul 21, 2010 at 11:59 AM, Andy Hewitt > <andyphew...@btopenworld.com> wrote: > > >> Thank you for your reply. Unfortunately for some reason I can't open >> ver7.06, it says it can't find the psk.dll, it's there OK in the DX4W >> directory but after I set up 8.04 it won't work. >> >> No problem anyhow. >> >> I opened the .INI file with notepad and there under radio are the settings, >> they may not get transferred but they are recorded. In the case of the >> IC706mk2g the baud rate should be 4800 (not 1200 as DX4W wants) and the >> address 4E (not 48 as the default in DX4 is, nor 50 as the notes for the >> radio in Preferences says). DTR and RTS are low and it's all working now. >> > > ______________________________________________________________ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
