Kirk, Have you ever made any changes to the rig control files? I changed the baud rate in the rig control file (in 8.04) and when I updated to 8.05, I didn't copy the new rig control file, so the radio didn't work. Good luck.
73, Bud N7CW -----Original Message----- From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net] On Behalf Of N0KK,Kirk Sent: Friday, February 04, 2011 5:29 PM To: dx4win@mailman.qth.net Subject: [Dx4win] Radio Control issues I upgrade to 8.04 I also switched PC's. Pulled all ini files etc to new PC all is working well...rotor controls, internet etc. Where I'm running into conflict is in the radio control. Let me preface this by saying the rig control is working as it should in all other programs I use. Writelog, MMTTY..etc What is happening is this...WHILE I tune the radios frequency knob...The cursor blinks and freq reads as it should. If I STOP tuning..cursor stops blinking and radio times out. I made NO changes to the rig settings and as a stated I used the ini file from my other pc. Anyone with some thoughts? Kirk ______________________________________________________________ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html