Remove the Pigknob and LP-Bridge from the equation and see if the
problem continues. It is entirely likely that two additional
processing stages cause enough delay that DX4Win is timing out.
73,
... Joe, W4TV
On 2014-06-06 12:07 PM, Howard K2HK wrote:
From: Howard K2HK <ho...@hotmail.com>
Date: June 6, 2014 at 1:30:27 PM
Subject:( K3)Can't interface Dx4win to K3
No response from Dx4win reflector so trying once more.K3 does not change
frequency when using Dx4win 8.05. Simply times out when a spot is selected. It
had been working w/o problem.
My setup: Win7 computer, native serial port (com1) , P3, Pigknob, Winkeyer. I
am using LP bridge for virtual serial ports. All programs respond as normal,
i.e.,keying, kkey macro program, K3 utility. However, when selecting a spot on
DX spots screen I receive the radio time out, interface disabled. So far as I
can tell the DX spot screen updates and all other features function normally. I
have tried the cable directly to K3 and with another K3 with similar results. I
have also changed serial ports.
73,
Howard ..K2HK
______________________________________________________________
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
______________________________________________________________
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
