I am not pc savvy, but i thought comport 1 was dedicated for the pc. May
be you need to us another port??
Bob
Bob Papa November
On 6/6/2014 12:07, Howard K2HK wrote:
From: Howard K2HK <ho...@hotmail.com>
Date: June 6, 2014 at 1:30:27 PM
Subject:( K3)Can't interface Dx4win to K3
No response from Dx4win reflector so trying once more.K3 does not change
frequency when using Dx4win 8.05. Simply times out when a spot is selected. It
had been working w/o problem.
My setup: Win7 computer, native serial port (com1) , P3, Pigknob, Winkeyer. I
am using LP bridge for virtual serial ports. All programs respond as normal,
i.e.,keying, kkey macro program, K3 utility. However, when selecting a spot on
DX spots screen I receive the radio time out, interface disabled. So far as I
can tell the DX spot screen updates and all other features function normally. I
have tried the cable directly to K3 and with another K3 with similar results. I
have also changed serial ports.
73,
Howard ..K2HK
______________________________________________________________
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
______________________________________________________________
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
