Thanks for a new clue, Kostas - around the same time the trouble started I switched from an AT&T Uverse modem/router to one from Time-Warner. I will also check out VE7CC's client . . .
73, Duane Duane Calvin, AC5AA Austin, Texas ac...@ac5aa.com -----Original Message----- From: DX4WIN [mailto:dx4win-boun...@mailman.qth.net] On Behalf Of Kostas SV1DPI Sent: Sunday, November 15, 2015 4:43 AM To: dx4win@mailman.qth.net Subject: Re: [Dx4win] Cluster connects but no updates after I had also problems with clusters in the past. Clusters' connection braked after some time. I used VE7CC's client program which has a function to keep the connection alive. Dx4win was connected on this program and I could watch the spots. After a lot of time I found that it was a problem in my adsl router/modem as when I changed this, I can connect to the clusters directly without a problem. I don' t know if this is your problem but just in case. By the way it would be very good for all of us to use the ve7cc program. If I made a logging program right now from scratch, I wouldn't include a cluster interface but just a connection to ve7cc (beside this I wouldn't make a rig control routine also but just a connection to omnirig). My problem with ve7cc, is that many times I get bored to run another program and make the connection routine also. A nice solution would be if a future version of dx4win has an option to run ve7cc and connect to it automatically. Maybe there is an external program do this. Any info? 73 Kostas SV1DPI On 14/11/2015 11:20 μμ, Duane Calvin wrote: > Hi all - I have a peculiar problem that has cropped up. I can't tell > if it's due to an MS update, or from my installing the latest Norton > Security software. All has been working fine for some time, but as of > the last couple of weeks (roughly since I did the Norton install) I > can connect to a cluster, do a SH/DX to list the last series of spots, > but then nothing after that and I lose connection. Now, I've got my > spots limited to 5-land, and there are not a lot of people actively > spotting in 5-land, but somehow the connection gets lost. I don't see > any disconnect messages unless I try to send a spot, or do another > SH/DX in which case there is no response, and eventually I get a > message that the connection is closed. I've looked through the Norton > settings but probably don't know what to look for. If anyone can give me > some hints, I'd sure appreciate it. > > > > 73, Duane > > > > Duane Calvin, AC5AA > > Austin, Texas > > ac...@ac5aa.com > > > > ______________________________________________________________ > DX4WIN mailing list > Home: http://mailman.qth.net/mailman/listinfo/dx4win > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:DX4WIN@mailman.qth.net > > This list hosted by: http://www.qsl.net Please help support this email > list: http://www.qsl.net/donate.html > ______________________________________________________________ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html