Hi Dave, When you have opened the keyboard window, try using Alt-F9 or F-10 to set the keyer speed. This may wake up the Winkey connection. That is the way mine works.
73, Bud N7CW On Thu, May 23, 2019 at 6:50 AM Artek Manuals <manu...@artekmanuals.com> wrote: > Keith & Mike > > Thanks ... When I do this ( And save changes and exit setup) then I hit > ALT-K which brings up the keyboard window, At the top of the Window it > says WINKEY NOT RESPONDING ( and of course no text is sent to the keyer > when typed and I cant get to the Keyer set up from the Keyboard window) > > If I immediately close DX4WIN and open N1MM+ ...winkey is immediately > recognized in N1MM and I am able to talk through the keyer with stored > messages or in keyboard mode and it sends CW to the radio no problem > > Restarting DX4WIN ( or the computer) does not change anything > > ?????????? > > Dave > > On 5/23/2019 7:24 AM, Keith Beebe W3KB wrote: > > Dave NR1DX: > > > > In the*File > Preferences > CW window I simply have Device Type: > > WinKey and External keyer Port: Com 10 (yours is Com 2) all the others > > have None.* > > > > _Now here is the other main part: _Alt-K brings up the keyer window in > > DX4WIN. Then right-click on that window and bring up the Settings for > > the WinKey itself. > > > > Here is what I have: > > > > Keyer Mode: Iambic A Pin 5 Config: 5=PTT Priority: Normal > > Hang Time: 1:00 > > > > There are other Mode Register settings below that but those are for > > the spacing and weight etc. > > > > Once everything is running you can either use the knob on the WinKey > > itself to change the speed or Alt-F9 and Alt-F10 on the keyboard. > > > > Mine works fine here. > > > > Keith W3KB > > > > > > ------------------------------------------------------------------------ > > *From:* dx4win-boun...@mailman.qth.net > > <dx4win-boun...@mailman.qth.net> on behalf of Artek Manuals > > <manu...@artekmanuals.com> > > *Sent:* Thursday, May 23, 2019 4:38 AM > > *To:* DX4WIN@mailman.qth.net > > *Subject:* [Dx4win] WINKEY USB and DX4WIN > > Maybe I am just dense but I cant seem to successfully configure DX4WIN > > to use WINKEY-USB keyer. > > > > Running a TS990 on the serial port (not USB port) on COM 1,� which talks > > to DX4WIN just fine, I have the WINKEY USB on COM2. Winkey works just > > fine in stand alone with the demo program and also with N1MM+ contest > > logger but I cant seem to find the secret phrase to get it to talk to > > DX4WIN. Have tried about just every combo I can thing of in the > > <preferences><CW> window > > > > �....Help! > > > > Dave > > NR1DX > > manu...@artekmanuals.com > > > > -- > > Dave > > manu...@artekmanuals.com > > www.ArtekManuals.com <http://www.ArtekManuals.com> > > > > > > --- > > This email has been checked for viruses by Avast antivirus software. > > https://www.avast.com/antivirus > > > > ______________________________________________________________ > > DX4WIN mailing list > > Home: http://mailman.qth.net/mailman/listinfo/dx4win > > Help: http://mailman.qth.net/mmfaq.htm > > Post: mailto:DX4WIN@mailman.qth.net > > > > This list hosted by: http://www.qsl.net > > Please help support this email list: http://www.qsl.net/donate.html > > -- > Dave > manu...@artekmanuals.com > www.ArtekManuals.com > > ______________________________________________________________ > DX4WIN mailing list > Home: http://mailman.qth.net/mailman/listinfo/dx4win > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:DX4WIN@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
