hi Wayne I have all the latest firmware/router microHam stuff ok but I
noticed in the router software that the com port 5 (radio freq/mode)
shows (open 4800 8n1) same in both dx4win and microHam but I see
nowhere in dx4win or microham, or radio (FTdx5000) to set it to 8n2....
I have to hit F9 when first opening the log ( I think that should be
user selectable) and it goes directly to the rig freq/mode as it should.
In dx4win.. preferences.. radio .... max tries was set to 2 but I
bumped that up to 10... hope that was the right way to move! so far so
good but Zoran WA7AA also suggested running a brouser video might be
also affecting it. I am running WIN 10 , 2 monitors with Email program
and Chrome also running along side DX4WIN. All this workee fine until 2
days ago. thanks I sure do appreciate all the thoughts! 73's Cort K4WI
Wayne M <mailto:wa1...@gmail.com>
Thursday, November 12, 2020 2:50 PM
Hi Cort,
Which radio are you using? You may want to check the virtual port
drivers from the microham to make sure windows has not done one of
it's updates on them. If it's a Yaesu radio check the stop bits
(should be 2) and RTS setting in the radio as well as the software.
With 6 tries DX4W may not be connecting right from the git go. Once
DX4W is up if you push F9 in DX4W does the computer read the frequency
from the radio right away?
I no longer use a microham but have in the past. I am using the FT991a
and FTdx5000 with DX4Win with no issues. I know microsoft has updated
some prolific drivers and I have had trouble with them and had to
revert to the original driver.
73
Wayne WA1PMA
______________________________________________________________
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
