Al I don't want to appear picky..but you meant 5 bit code..just 5 data bits. But I guess its 7.5 if you include 1 start bit and 1.5 stop bits.
But you are correct about the problem...in fact some serial multiport cards also fail with respect to 45 baud baudot. Ron N5IN ----- Original Message ----- From: "FireBrick" <[EMAIL PROTECTED]> To: <[email protected]> Sent: Sunday, December 01, 2002 12:46 PM Subject: Re: [DXBase] USB to Serial > The one problem that many have found with USB to serial ports is the > inability to transmit 7 bit code. > Consequently they do not work sending FSK. > I and others on the Writelog Reflector have tested many USB to Serial > adapters and found they will control the rig, control ptt but do not send > FSK. > Most will use the same IRQ for the various functions. > > I presently run MMTTY from the Programs Menu Option so I need that FSK > capability. > > > ----- Original Message ----- > From: "Al Bailey" <[EMAIL PROTECTED]> > To: <[email protected]> > Sent: Saturday, November 30, 2002 12:34 PM > Subject: [DXBase] USB to Serial > > > > I have tested the Comtrol USB to Serial port on the following and they all > > work with no problems. > > > > Yaesu FT1000MP > > Kenwood TS-2000X > > Alpha 87 > > Hy-Gain DCU-1 > > Kantronics KAM > > > > The installation was painless and they seem to work on any port I select. > > The one I used belongs > > to a friend of mine, N8SNM, and I just purchased one of my own for $128.69 > > to the door. I ordered > > mine from Matter of Fax and hope to have it soon as it sure will take care > > of all my serial problems. > > > > Hope this helps others. Best 73 & Happy Holidays > > > > _______________________________________________ > > DXBase Reflector - Please visit us on the web at www.dxbase.com > > - - - - - - - - - - - - - - - - - - - - - - - > > To UNSUBSCRIBE please visit: > > http://mailman.qth.net/mailman/listinfo/dxbase > > > > > > > _______________________________________________ > DXBase Reflector - Please visit us on the web at www.dxbase.com > - - - - - - - - - - - - - - - - - - - - - - - > To UNSUBSCRIBE please visit: > http://mailman.qth.net/mailman/listinfo/dxbase >
