A few of us have experienced something similar. In my case, if the Internet Window is open and operating with a Internet node, the cpu use will be very minor, .01 with no other activity-->05 during a quick callsign lookup.
But... If the internet Cluster node loses connection, cable loss of signal, inadvertent power loss to cable modem, then Windows Task Manager show DXBase as hogging it all, 98% I've never been able to prevent it. A 'KeepAlive' setting makes no difference as the loss of connection is due to loss of the physical internet connection. This situation does not occur if I'm using the VHF packet cluster node. I'm using WINXP PRO AMD 2400 cpu 512 ram multimonitors. ----- Original Message ----- From: "Joe - WL7M" <[EMAIL PROTECTED]> To: <[email protected]> Sent: Sunday, February 09, 2003 7:51 PM Subject: [DXBase] CPU Use Nears 95 Percent > As a new guy, I'm experiencing a problem perhaps others have solved. The > CPU use rater goes to about 95 percent when DXBase 2003 has been running > for awhile - a few hours. I have an internet connection running, spotting > DX stations. When I close the internet connection, the CPU rates drops > back to about 4 percent. Anyone have an idea as to what is causing this > drain on the resources? Makes it tough to use after awhile..... > > WinXP > Dell Dimension 4100 933 MHz > 384 M RAM > > 73, > Joe > WL7M > > > _______________________________________________ > DXBase Reflector - Please visit us on the web at www.dxbase.com > - - - - - - - - - - - - - - - - - - - - - - - > To UNSUBSCRIBE please visit: > http://mailman.qth.net/mailman/listinfo/dxbase > >
