Greg, A couple thoughts:
1. You cannot use "autobaud" to interface with DXbase. DXbase expects your radio baudrate to be set to the same baudrate that you select in DXbase user options. If you have DXbase user options set to 4800, then you must also assign your radio baudrate to be 4800. 2. The address that is set in the radio must agree with the address that is assigned in the DXbase radios.ini file. We recommend setting the radio to agree with the DXbase radios.ini file because if you change the radios.ini file, you would have to continue to "remember" to change any future versions of radios.ini since the address we use would not know about your change. Hope this helps, Jack ----- Original Message ----- From: "Greg - N4CC" <[EMAIL PROTECTED]> To: <[email protected]> Sent: Sunday, March 07, 2004 8:45 AM Subject: [DXBase] IC-756 Pro II > Hi All -- anyone have any thoughts...I'm at my wits end trying to get my > 756 Pro II to interface with DXBase 2004. > Facts: > 1. I have two different Yaesu radios that both interface fine with DXBase 2004 > 2. The Icom Radio interfaces with Writelog when I use 5Ch as the address > > I use 64h for the radio address with DXBase, and have the baud rate set to > "auto" as I do with Writelog... I am trying to use it as "radio 2" and > have the "radio 2" parameters set as 4800, 8, None, 1. DTR and RTS are > both checked and "enable radio 2" is checked. > > I tried going into DXBase Radios.ini file and changing the address to 5C > but no change. Changed it back to its initial 64h setting... > > So, I know the interface works and the radio work, because it works with > Writelog. What do I need to change to get it to work with DXBase? I know > some people have said that they are having success with their PRO > II's...Can you tell me how you have it set up and have you made any changes > with your port settings or with the radios.ini file? > > Thanks and 73 de Greg-N4CC > _______________________________________________ > DXBase Reflector - Please visit us on the web at www.dxbase.com > - - - - - - - - - - - - - - - - - - - - - - - > To UNSUBSCRIBE please visit: > http://mailman.qth.net/mailman/listinfo/dxbase >
