OK, Jack -- I put the radio on 4800 baud (which I had tried anyway) but still no joy...I don't see a baud rate setting in the radios.ini file. The baud rate that is set in "User Options, Radio 2 is 4800. So both the radio and DXBase are set to 4800...Any other thoughts? Thanks/73 de Greg
At 08:54 AM 3/7/2004 -0500, Jack wrote: >Greg, > >A couple thoughts: > >1. You cannot use "autobaud" to interface with DXbase. DXbase expects your >radio baudrate to be set to the same baudrate that you select in DXbase user >options. If you have DXbase user options set to 4800, then you must also >assign your radio baudrate to be 4800. > >2. The address that is set in the radio must agree with the address that is >assigned in the DXbase radios.ini file. We recommend setting the radio to >agree with the DXbase radios.ini file because if you change the radios.ini >file, you would have to continue to "remember" to change any future versions >of radios.ini since the address we use would not know about your change. > >Hope this helps, >Jack > >----- Original Message ----- >From: "Greg - N4CC" <[EMAIL PROTECTED]> >To: <[email protected]> >Sent: Sunday, March 07, 2004 8:45 AM >Subject: [DXBase] IC-756 Pro II > > >> Hi All -- anyone have any thoughts...I'm at my wits end trying to get my >> 756 Pro II to interface with DXBase 2004. >> Facts: >> 1. I have two different Yaesu radios that both interface fine with DXBase >2004 >> 2. The Icom Radio interfaces with Writelog when I use 5Ch as the address >> >> I use 64h for the radio address with DXBase, and have the baud rate set to >> "auto" as I do with Writelog... I am trying to use it as "radio 2" and >> have the "radio 2" parameters set as 4800, 8, None, 1. DTR and RTS are >> both checked and "enable radio 2" is checked. >> >> I tried going into DXBase Radios.ini file and changing the address to 5C >> but no change. Changed it back to its initial 64h setting... >> >> So, I know the interface works and the radio work, because it works with >> Writelog. What do I need to change to get it to work with DXBase? I know >> some people have said that they are having success with their PRO >> II's...Can you tell me how you have it set up and have you made any >changes >> with your port settings or with the radios.ini file? >> >> Thanks and 73 de Greg-N4CC >> _______________________________________________ >> DXBase Reflector - Please visit us on the web at www.dxbase.com >> - - - - - - - - - - - - - - - - - - - - - - - >> To UNSUBSCRIBE please visit: >> http://mailman.qth.net/mailman/listinfo/dxbase >>
