Are you looking for NICs that can boot via the NIC using iSCSI or are you looking for a flash utility that actually can flash the EEPROM? We have NICs today that boot via iSCSI. You can even install RHEL5 and SLES10 via those NICs.
Let us know. Cheers, John ----------------------------------------------------------- "Those who would give up essential Liberty, to purchase a little temporary Safety, deserve neither Liberty nor Safety.", Benjamin Franklin 1755 -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Brandon Schulz Sent: Wednesday, June 11, 2008 6:30 AM To: [email protected] Subject: [E1000-devel] flash firmware on PRO/1000 PT from Linux? Is there a way to flash the boot ROM and set up iSCSI remote boot on the Intel PRO/1000 PT (Dual/Quad) card from Linux? I have done quite a bit of searching and all of the tools I have found so far have been for Windows or DOS. Also, is there any other flashable firmware on these Intel ethernet cards? I am trying to support firware updates for a bunch of components in our servers directly from Linux since we don't want to have to boot Windows or DOS from these systems. Thanks, Brandon ------------------------------------------------------------------------- Check out the new SourceForge.net Marketplace. It's the best place to buy or sell services for just about anything Open Source. http://sourceforge.net/services/buy/index.php _______________________________________________ E1000-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/e1000-devel
