> -----Original Message-----
> From: Christian Ruppert [mailto:id...@qasl.de]
> Sent: Friday, August 21, 2015 7:06 AM
> To: Rose, Gregory V
> Cc: e1000-de...@lists.sf.net
> Subject: RE: [E1000-devel] X710 / i40e interface resets
> 
> On 2015-07-28 18:51, Rose, Gregory V wrote:
> >> -----Original Message-----
> >> From: Christian Ruppert [mailto:id...@qasl.de]
> >> Sent: Tuesday, July 28, 2015 5:43 AM
> >> To: Rose, Gregory V
> >> Cc: e1000-de...@lists.sf.net
> >> Subject: RE: [E1000-devel] X710 / i40e interface resets
> >>

[snip]

> > I've been told that the Tx driver issue detected message is due to a
> > MDD (Malicious Driver Detection) event.  We need to find out what is
> > causing that so if you could please send me your system log and the
> > output of ethtool <intf> and ethtool -i <intf> perhaps I can see what
> > might be occurring.  If not then we'll have to debug further.
> 
> See the initial Mail for ethtool -k and so on. Also:
> # ethtool eth0
> Settings for eth0:
>       Supported ports: [ FIBRE ]
>       Supported link modes:   1000baseT/Full
>                               10000baseT/Full
>       Supported pause frame use: Symmetric
>       Supports auto-negotiation: No
>       Advertised link modes:  1000baseT/Full
>                               10000baseT/Full
>       Advertised pause frame use: No
>       Advertised auto-negotiation: No
>       Speed: 10000Mb/s
>       Duplex: Full
>       Port: FIBRE
>       PHYAD: 0
>       Transceiver: external
>       Auto-negotiation: off
>       Supports Wake-on: d
>       Wake-on: d
>       Current message level: 0x0000000f (15)
>                              drv probe link timer
>       Link detected: yes
> # ethtool -i eth0
> driver: i40e
> version: 1.2.48
> firmware-version: f4.33.31377 a1.2 n4.42 e191b
> bus-info: 0000:02:00.0
> supports-statistics: yes
> supports-test: yes
> supports-eeprom-access: yes
> supports-register-dump: yes
> supports-priv-flags: yes

I also need the output of 'dmesg' - and I need to figure out how to determine 
what specific MDD event is occurring.  I'll get back to you with instructions 
on how to do that when I get the system log from you.

Thanks,

- Greg


------------------------------------------------------------------------------
_______________________________________________
E1000-devel mailing list
E1000-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/e1000-devel
To learn more about Intel&#174; Ethernet, visit 
http://communities.intel.com/community/wired

Reply via email to