Hi,
On 09.12.2015 17:32, Tantilov, Emil S wrote:
>
> There is no problem with carrier detection - if the Link LED is on that
> means that the ports have link. Bringing down the interface does not
> always result in losing link. For example the driver will not shut down
> the PHY or disable the lasers if the interface supports and is configured
> for WOL.
>
> Thanks,
> Emil
>
ok, then the problem is that the driver cannot properly shut down the PHY
if a DA copper cable is used. WOL is not enabled on both boxes:
> ethtool eth0 | grep Wake
Supports Wake-on: d
Wake-on: d
Is this a bug in the driver or a hardware problem? Do you think this can
be fixed somehow? If so, can (or should) I file a bug report somewhere?
This effects the link selection process in Active-Backup bonds between
two boxes, for example.
Thank you again for your answer.
Best regards,
Peter
------------------------------------------------------------------------------
_______________________________________________
E1000-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/e1000-devel
To learn more about Intel® Ethernet, visit
http://communities.intel.com/community/wired
