Hi Ravi,
It probably won't be this, but...when I was having the same issue you
were, I installed EchoVNC 1.4 to see it would solve it. However, I found
if I didn't shut down the RealVNC server first (if it already had problems
with EchoVNC), the fix didn't "take."
So, to make it work I had to (for all intense purposes):
1) Shut down EchoVNC
2) Shut down RealVNC (or UltraVNC in your case)
3) Install EchoVNC 1.4
4) Start RealVNC
5) Start EchoVNC
Since then I haven't run into the problem you are having...
Take care,
Alan
On Thu, 20 Oct 2005 17:19:59 -0400, Ravi Teja <[EMAIL PROTECTED]>
wrote:
Yes i did already. In the Admin properties "Allow loopback conenctions"
has been checked. Any other tries ?.
I am running out of ideas.
- RT
----- Original Message ----- From: "Scott C. Best" <[EMAIL PROTECTED]>
To: "Ravi Teja" <[EMAIL PROTECTED]>
Sent: Thursday, October 20, 2005 5:08 PM
Subject: Re: [Echovnc-users] Unknown 3.3 security type
Hmmm. Did you configure your UltraVNC server to accept connections
from the loopback interface? I think UltraVNC used to have that turned
off
by default (RealVNC has it turned on by default now).
-Scott
On Thu, 20 Oct 2005, Ravi Teja wrote:
But, I am using UltraVNC in this context, not RealVNC. Will it still
solve my problem ?
----- Original Message ----- From: "Scott Best" <[EMAIL PROTECTED]>
To: "Ravi Teja" <[EMAIL PROTECTED]>
Cc: <[email protected]>
Sent: Thursday, October 20, 2005 3:44 PM
Subject: Re: [Echovnc-users] Unknown 3.3 security type
Ravi:
There's a minor incompatibility with prior versions of EchoVNC and
RealVNC servers which causes periodic "connection closed unexpectedly"
errors. We've fixed that in the 1.40 release which you can get here:
ftp://ftp.echogent.com/EchoVNC/EchoVNC_1.40a_Setup.exe
Please let me know if that helps fix your troubles!
-Scott
On Oct 20, 2005, at 12:20 PM, Ravi Teja wrote:
I have setup a Echoserver in Columbus and added one client from the
same location(but from different network) and two clients are from
India. I am able to see three clients connected to EchoServer, but
when i try to start a EchoVNC Connection from Indian Client to
Columbus Client. It says
These are the messages i receive:
1. Looking for partner. Please wait..
2. Partner found.
3. Creating connection
4. Connecting...
5. "The connection closed unexpectedly. Do you wish to attempt to
reconnect to 127.0.0.1::3363?"
If i click yes this is what i get
Unknown 3.3 security type
Do you wish to attempt to reconnect to 127.0.0.1:3401?
Do i need anything to be changed. I am using trial vesion of
Echoserver for windows version 1.40 from Kagi, because i am unable to
connect to demo server.
Please help. Thanks in advance.
- RT
-------------------------------------------------------
This SF.Net email is sponsored by:
Power Architecture Resource Center: Free content, downloads, discussions,
and more. http://solutions.newsforge.com/ibmarch.tmpl
_______________________________________________
Echovnc-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/echovnc-users
--
Using Opera's revolutionary e-mail client: http://www.opera.com/mail/
-------------------------------------------------------
This SF.Net email is sponsored by:
Power Architecture Resource Center: Free content, downloads, discussions,
and more. http://solutions.newsforge.com/ibmarch.tmpl
_______________________________________________
Echovnc-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/echovnc-users
