Hi, now that I installed the full cygwin, the configtool.exe works fine. I downloaded the full snapshot of the ecos cvs (ecos-trunk-full.tar.bz2) and when invoking configtool.exe I have to give the repository tree directory, but there are many errors: The tree is C:\cygwin\ecos
The Error: "This version does not have any valid version subdirectories" What could be the problem? 2nd Question: I tried to follow the instructions on http://www.mlbassoc.com/examples building an simple "hello"-appl with commandline tool ecosconfig.exe, but I do not know what the name of my target could be in this line: % ecosconfig new viper net //viper=target I have a freescale mpc5516 target. Thank You -------- Original-Nachricht -------- Datum: Thu, 07 Feb 2008 09:23:16 -0700 Von: Gary Thomas <[EMAIL PROTECTED]> An: [EMAIL PROTECTED] CC: eCos Discussion <[email protected]> Betreff: Re: [ECOS] RE: eCos configtool doesn\'t work on cygwin Please keep your replies on the list so that all benefit. [EMAIL PROTECTED] wrote: > Hi, > > > first of all, sorry for this e-mail address, but my other e-mail address was > not accepted because of my signature. > > Thanks for the advice to download the recent cvs. > > I got one question: I can now build a eCos binary with a makefile that i got > from a freescale-worker with a specific application running, and it does! > > unfortunately, when trying to make the example of hello.c there are errors. > it only works when making his application. > > Now I'd like to get my own application to run on eCos. > Do you think it makes sense to do this in the ordinary way (with eCos > configurator) or do u think I should try to build my application with a > modified makefile? Try following the instructions at http://www.mlbassoc.com/examples > > -------- Original-Nachricht -------- >> Datum: Wed, 06 Feb 2008 07:36:23 -0700 >> Von: Gary Thomas <[EMAIL PROTECTED]> >> An: "Jérémy Alles" <[EMAIL PROTECTED]> >> CC: [EMAIL PROTECTED], [email protected] >> Betreff: Re: [ECOS] RE: eCos configtool doesn\'t work on cygwin > >> Jérémy Alles wrote: >>> Hi there, >>> >>> I'm a new user to eCos (I started to work with it yesterday !) and I had >> the >>> same problem (configtool under Cygwin not working). I solved this >> problem by >>> using an up-to-date version of configtool that I downloaded from this >> page: >>> http://www.ecoscentric.com/devzone/configtool.shtml >> I'd also *strongly* suggest using the anonymous CVS - eCos 2.0 is >> approaching >> 6 years old. >> >> Also, Mr "Gentleman.nbg" (real names are preferred here!), you'll need to >> port eCos to your platform. Starting from the most up to date sources >> would be a wise move. >> >>> -----Message d'origine----- >>> De : [EMAIL PROTECTED] >>> [mailto:[EMAIL PROTECTED] De la part de >>> [EMAIL PROTECTED] >>> Envoyé : mercredi 6 février 2008 14:56 >>> À : [email protected] >>> Objet : [ECOS] eCos configtool doesn't work on cygwin >>> >>> Hello eCos-Team, >>> >>> I am currenty trying to build a eCos System with an application that I >> wrote >>> for my studies. >>> Now I have a problem with the configtool under Cygwin. >>> >>> I downloaded a eCos 2.0 source, where there is a configtool.exe in >>> ecos-2.0/tools/bin when executing it under cygin nothing happens. not >> even a >>> message from shell. >>> >>> Then I read that there are some problems with recent cygwin versions, so >> I >>> tryied to execute the unsupported snapshot of the configtool that should >>> work with the recent cygwin version. This configtool doesnt execute >> eather. >>> I found an Windows version of configtool that I could install and even >> run >>> under Windows, but I don't know if I should use it. >>> My target is a Freescale MPC5516 microcontroller, that should be able to >> run >>> eCos 2.0. In the templates I don't know what to choose. >>> >>> What do u suggest? How can I make a build of eCos now? >>> >>> Thank you very much -- ------------------------------------------------------------ Gary Thomas | Consulting for the MLB Associates | Embedded world ------------------------------------------------------------ -- Psssst! Schon vom neuen GMX MultiMessenger gehört? Der kann`s mit allen: http://www.gmx.net/de/go/multimessenger -- Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss
