Hi, I have been using Solaris Express nb95 on external USB disk on myEeePC 4G. Today I downloaded the atge driver and installed it on my EeePC followed by README.txt.
But my L2 NIC doesn't work correctly. The command "ifconfig atge0 plumb" is OK. But The command "ifconfig atge0 dhcp start" is NG. The messages is below Dec 14 00:20:11 eeepcb95 atge: [ID 392281 kern.info] atge0: atge_init_chip_2: called at time:27063 Dec 14 00:20:11 eeepcb95 atge: [ID 453531 kern.info] atge0: atge_init_chip_2: GAPC:0x60405060 Dec 14 00:20:11 eeepcb95 atge: [ID 648229 kern.info] atge0: atge_init_chip_2: HDCTL:0x7a1f037 Dec 14 00:20:11 eeepcb95 atge: [ID 346521 kern.info] atge0: atge_init_chip_2: INTRDELAY_INIT:0x1 Dec 14 00:20:11 eeepcb95 atge: [ID 477463 kern.info] atge0: atge_init_chip_2: INTRCLR_TIMER:0xc350 Dec 14 00:20:11 eeepcb95 atge: [ID 500093 kern.info] atge0: atge_init_chip_2: MTU: 0x5f2 Dec 14 00:20:11 eeepcb95 atge: [ID 765148 kern.info] atge0: atge_set_rx_filter: called at time:27063, active:0, rxmode:8<ENABLE>, MACCTL: 28005c20<DEBUG,RXVTAG,FD> Dec 14 00:23:10 eeepcb95 atge: [ID 765148 kern.info] atge0: atge_set_rx_filter: called at time:45040, active:0, rxmode:9<ENABLE,PROMISC>, MACCTL: 04101cec<AB,AUTOPAD,CRCEN,FD,RXFC,TXFC> Dec 14 00:28:00 eeepcb95 atge: [ID 765148 kern.info] atge0: atge_set_rx_filter: called at time:74022, active:0, rxmode:8<ENABLE>, MACCTL: 04109cec<AB,PROMISC,AUTOPAD,CRCEN,FD,RXFC,TXFC> I think this driver work correctly for all EeePC with Atheros L2 NIC. So could you tell me how to resolve this problem. Best Regards. Ryo Murakawa
