Murakawa-san sorry too late to respond I have had a cold for a long time:-( let me check with Murayama-san.
sorry for your impatience. -masafumi On 2008/12/14, at 0:49, Ryo Murakawa wrote: > Hi, > > I have been using Solaris Express nb95 on external USB disk on > myEeePC 4G. > Today I downloaded the atge driver and installed it on my EeePC > followed by README.txt. > > But my L2 NIC doesn't work correctly. The command "ifconfig atge0 > plumb" is OK. But > The command "ifconfig atge0 dhcp start" is NG. > > The messages is below > Dec 14 00:20:11 eeepcb95 atge: [ID 392281 kern.info] atge0: > atge_init_chip_2: called at time:27063 > Dec 14 00:20:11 eeepcb95 atge: [ID 453531 kern.info] atge0: > atge_init_chip_2: GAPC:0x60405060 > Dec 14 00:20:11 eeepcb95 atge: [ID 648229 kern.info] atge0: > atge_init_chip_2: HDCTL:0x7a1f037 > Dec 14 00:20:11 eeepcb95 atge: [ID 346521 kern.info] atge0: > atge_init_chip_2: INTRDELAY_INIT:0x1 > Dec 14 00:20:11 eeepcb95 atge: [ID 477463 kern.info] atge0: > atge_init_chip_2: INTRCLR_TIMER:0xc350 > Dec 14 00:20:11 eeepcb95 atge: [ID 500093 kern.info] atge0: > atge_init_chip_2: MTU: 0x5f2 > Dec 14 00:20:11 eeepcb95 atge: [ID 765148 kern.info] atge0: > atge_set_rx_filter: > called at time:27063, active:0, rxmode:8<ENABLE>, MACCTL: > 28005c20<DEBUG,RXVTAG,FD> > Dec 14 00:23:10 eeepcb95 atge: [ID 765148 kern.info] atge0: > atge_set_rx_filter: > called at time:45040, active:0, rxmode:9<ENABLE,PROMISC>, MACCTL: > 04101cec<AB,AUTOPAD,CRCEN,FD,RXFC,TXFC> > Dec 14 00:28:00 eeepcb95 atge: [ID 765148 kern.info] atge0: > atge_set_rx_filter: > called at time:74022, active:0, rxmode:8<ENABLE>, MACCTL: > 04109cec<AB,PROMISC,AUTOPAD,CRCEN,FD,RXFC,TXFC> > > I think this driver work correctly for all EeePC with Atheros L2 NIC. > So could you tell me > how to resolve this problem. > > Best Regards. > > Ryo Murakawa > > > > > > _______________________________________________ > eeepc-discuss mailing list > eeepc-discuss at opensolaris.org > http://mail.opensolaris.org/mailman/listinfo/eeepc-discuss
