Masafumi-san Thank you for your reply.
And I want to make sure if my step is wrong or not. When I use this atge driver, do I have to stop nwam service? Today I installed Jaris on my hp mini 1000. And I installed myk driver to work the wired NIC and the ndis driver to work the wireless driver. When nwam service run, I never use this myk driver. But when I stop nwam, I can use the wired NIC. Best Regards. Ryo Murakawa On 2008/12/21, at 17:54, Masafumi Ohta wrote: > Murakawa-san > > sorry too late to respond I have had a cold for a long time:-( > let me check with Murayama-san. > > sorry for your impatience. > > -masafumi > > On 2008/12/14, at 0:49, Ryo Murakawa wrote: > >> Hi, >> >> I have been using Solaris Express nb95 on external USB disk on >> myEeePC 4G. >> Today I downloaded the atge driver and installed it on my EeePC >> followed by README.txt. >> >> But my L2 NIC doesn't work correctly. The command "ifconfig atge0 >> plumb" is OK. But >> The command "ifconfig atge0 dhcp start" is NG. >> >> The messages is below >> Dec 14 00:20:11 eeepcb95 atge: [ID 392281 kern.info] atge0: >> atge_init_chip_2: called at time:27063 >> Dec 14 00:20:11 eeepcb95 atge: [ID 453531 kern.info] atge0: >> atge_init_chip_2: GAPC:0x60405060 >> Dec 14 00:20:11 eeepcb95 atge: [ID 648229 kern.info] atge0: >> atge_init_chip_2: HDCTL:0x7a1f037 >> Dec 14 00:20:11 eeepcb95 atge: [ID 346521 kern.info] atge0: >> atge_init_chip_2: INTRDELAY_INIT:0x1 >> Dec 14 00:20:11 eeepcb95 atge: [ID 477463 kern.info] atge0: >> atge_init_chip_2: INTRCLR_TIMER:0xc350 >> Dec 14 00:20:11 eeepcb95 atge: [ID 500093 kern.info] atge0: >> atge_init_chip_2: MTU: 0x5f2 >> Dec 14 00:20:11 eeepcb95 atge: [ID 765148 kern.info] atge0: >> atge_set_rx_filter: >> called at time:27063, active:0, rxmode:8<ENABLE>, MACCTL: >> 28005c20<DEBUG,RXVTAG,FD> >> Dec 14 00:23:10 eeepcb95 atge: [ID 765148 kern.info] atge0: >> atge_set_rx_filter: >> called at time:45040, active:0, rxmode:9<ENABLE,PROMISC>, MACCTL: >> 04101cec<AB,AUTOPAD,CRCEN,FD,RXFC,TXFC> >> Dec 14 00:28:00 eeepcb95 atge: [ID 765148 kern.info] atge0: >> atge_set_rx_filter: >> called at time:74022, active:0, rxmode:8<ENABLE>, MACCTL: >> 04109cec<AB,PROMISC,AUTOPAD,CRCEN,FD,RXFC,TXFC> >> >> I think this driver work correctly for all EeePC with Atheros L2 NIC. >> So could you tell me >> how to resolve this problem. >> >> Best Regards. >> >> Ryo Murakawa >> >> >> >> >> >> _______________________________________________ >> eeepc-discuss mailing list >> eeepc-discuss at opensolaris.org >> http://mail.opensolaris.org/mailman/listinfo/eeepc-discuss >
