Have you checked the 5.0 volt reference value In the CONFIG Menu at ADC
REF? See page 57 in the manual under CONFIG Menu for instructions.
This will/can affect things like rigs supply voltage.
73
Bob, K4TAX
On 9/4/2024 3:49 PM, elecraft-requ...@mailman.qth.net wrote:
Message: 22
Date: Wed, 4 Sep 2024 16:49:17 -0400
From:<ken.k...@gmail.com>
To: "'Corky'"<af...@searlsnet.com>, "'W3FPR'"<w3fpr...@gmail.com>,
"'RIchard Williams via Elecraft'"<elecraft@mailman.qth.net>
Subject: Re: [Elecraft] K3 Power Issues
Message-ID:<564301daff0b$e8d9c540$ba8d4fc0$@gmail.com>
Content-Type: text/plain; charset="us-ascii"
I'm not sure where the voltage displayed on the K3 is sampled, but I have
found it to be consistently about a volt lower than the voltage present at
the Power Pole connector on the back of the radio, especially when in
transmit mode. I have found this to be the case on both the K3 I use for
portable ops and my K3S in my home "shack".
Just FYI.
73,
Ken, KJ9B
--
Daddy said there would be days like this!
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com
