Tim:
Install a scrap resistor lead or piece of solid hookup wire from pin 1 to
pin 3 on J9 and J10 and install a 103 Cap from pin 7 to pin 12 of J 11 and
you will be back to what you had before... I would bet you have a problem on
the SSB board. I had this on one SSB generator and it was either RFC1 or
RFC2 that was shorting out to the crystal housing.
73
Jim Younce K4ZM
K2 SN: 18
_______________________________________________
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
