We changed the autodetect timing in later W2 firmware releases to dela with SO2R use. Check to make sure you have the latest f/w loaded in the W2. See: http://www.elecraft.com/software/W2/elecraft_w2_software.htm
73, Eric On 8/25/2010 9:21 AM, Bill K9YEQ wrote: > I was experiencing some erratic behavior, could have been a power > interruption issue. I reloaded the firmwar; fixed! ( I have 2 sensors as > well, one high power HF and the VHF.) > > Bill > K9YEQ > > -----Original Message----- > From: elecraft-boun...@mailman.qth.net > [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of K5WA > > > My W2 has a pair of 2 KW sensors which I run in the automatic sensor > switching mode. This way, I don't have to flip any switches as I alternate > between each rig of my SO2R setup. I am seeing erratic readings in the > automatic sensor switching mode that I am not seeing if I manually throw the > sensor switch to S1 or S2. From this result, I am concluding that my sensor > hook up is RF sound and the fault must be in the automatic switching > algorithm of the W2. I get the same erratic readings on the W2 as well as > the W2 software interface application. > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
