Please don't be so quick to judge the Alpha testers! We did plenty of testing on this software before it was released for Beta test by the public. The SSB problem wansn't introduced until the Noise gate issue was changed IN 4.17 (not the alpha test). I'm sure that Lyle will have everything back in order as soon as he gets back. > Date: Sat, 6 Nov 2010 18:58:57 -0400 > From: olin...@bellsouth.net > To: turnb...@net1.ie > CC: hb9...@bluewin.ch; elecraft@mailman.qth.net > Subject: Re: [Elecraft] Firmware 4.18 APF adjustment using shift control > > Wayne has officially yanked 4.18. If SSB problems with 4.17, reload > 4.14. Nothing until Lyle gets back. > > 4.17 alpha testers were going nuts on the APF and likely did little > checking of the TX function change, which apparently had the SSB bug > found in 4.17. Any problems, reload 4.14. > > 73, Guy. > > On Sat, Nov 6, 2010 at 2:53 PM, Doug Turnbull <turnb...@net1.ie> wrote: > > Richard and fellows, > > I too have not experienced the drop in SSB output. I am still using > > version 4.17. There is probably more to this problem than is immediately > > obvious and for that matter I wonder if the original Alpha testers ever > > experience the difficulty in the original testing. > > > > 73 Doug EI2CN > > > > -----Original Message----- > > From: elecraft-boun...@mailman.qth.net > > [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Richard Squire - > > HB9ANM > > Sent: 06 November 2010 18:02 > > To: elecraft@mailman.qth.net > > Subject: Re: [Elecraft] Firmware 4.18 APF adjustment using shift control > > > > > > A fellow Swiss ham and I apparently were among the lucky few not to > > experience any SSB power issue with Release 4.17/2.65. I wonder whether this > > has anything to do with some interaction with filters or other settings. > > > > But now after installing 4.18/2.67, I noticed that turning the shift to > > exactly 1 kHz will mute both receivers and only impulses from the encoder > > are heard (fairly loud!) until shift is returned CCW to below 300 Hz. > > > > Not a big issue since only slight moves around my 700 Hz sidetone are > > normally required. > > Just wanted to point out that the loss of SSB power does not seem to occur > > on every K3. > > > > > > ----- > > Richard - HB9ANM > > -- > > View this message in context: > > http://elecraft.365791.n2.nabble.com/Firmware-4-18-APF-adjustment-using-shif > > t-control-tp5711904p5712716.html > > Sent from the [K3] mailing list archive at Nabble.com. > > ______________________________________________________________ > > Elecraft mailing list > > Home: http://mailman.qth.net/mailman/listinfo/elecraft > > Help: http://mailman.qth.net/mmfaq.htm > > Post: mailto:Elecraft@mailman.qth.net > > > > This list hosted by: http://www.qsl.net > > Please help support this email list: http://www.qsl.net/donate.html > > > > > > ______________________________________________________________ > > Elecraft mailing list > > Home: http://mailman.qth.net/mailman/listinfo/elecraft > > Help: http://mailman.qth.net/mmfaq.htm > > Post: mailto:Elecraft@mailman.qth.net > > > > This list hosted by: http://www.qsl.net > > Please help support this email list: http://www.qsl.net/donate.html > > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html