Okay I'm getting ready to install the PLL upgrade board and it looks to me like this has the potential of being a problem. I have test fit the Thermistor PC board and I can see why the instructions call for the board to lean slightly towards U6. The problem I see is the position of RFC14 and the PC board. Any tips in getting it installed correctly. One thing I have done is to make sure the leads coming out of the board make a tight 90 degree bend out of the board as to give me better spacing on RFC14.
73, Ed KE7HGA -- View this message in context: http://elecraft.365791.n2.nabble.com/PLL-upgrade-board-on-K2-7109-tp6163532p6167096.html Sent from the Elecraft mailing list archive at Nabble.com. ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html