I can answer 2, Julian. It is yes. If there is no external 10 MHz signal, the K3 reference oscillator reverts to its normal operation. An asterisk (splat, whatever one wants to call it) appears on the LCD when there's an external signal detected, so you know at a glance whether the K3 is being controlled by the external signal.
Ron AC7AC -----Original Message----- 1. Will the K3EXREF work straight from the output of an Efratom LPRO-101 or does it need a TTL square wave output or something else requiring extra circuitry between the LPRO and the K3? 2. If the K3EXREF is installed, will the K3 still work as normal if the frequency standard is not turned on? To maximize life of the rubidium lamp in the frequency standard I wouldn't want to leave it on all the time and for a lot of amateur operation the frequency accuracy it provides isn't needed anyway. Julian, G4ILO ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html