Gary and others, Yes, I momentarily saw it working okay on 6 meters when I did a brief transmission on that band.
Unfortunately, as I don't have an antenna for 6 meters, the K3 encountered a high SWR there. And now it outputs only about 5 watts on each band (also in CW mode) when I've dialed an output power less than 12W. If I select a power level over 12W, so the KPA100 should kick in, I get no output whatsoever. So maybe I broke something now. :-( Or the cryptic bug has manifested itself in the CW mode too. Any ideas whether I could do a software reset of the radio? Fingers crossed here now... Frank PA4N At 21:36 31/01/2012, you wrote: >Hi Frank. > >I have the same problem: CW in SSB no longer works on K3#2887 running >firmware 4.39. I raised this on the reflector some months back and went >around the loop changing config settings, PTT, QRQ etc. I did manage to fix >it temporarily by restoring the K3 firmware configs, but annoyingly it has >packed up again since then. > >I *think* CW-in-SSB it might still work on some bands, not others. At >least, that's what I found last time I checked - I haven't checked lately. > >I suspect there might be a cryptic bug in the firmware (the best kind!). > >73 >Gary ZL2iFB > > > > -----Original Message----- > > From: elecraft-boun...@mailman.qth.net [mailto:elecraft- > > boun...@mailman.qth.net] On Behalf Of Frank R. Oppedijk > > Sent: Wednesday, 1 February 2012 7:48 a.m. > > To: Elecraft@mailman.qth.net > > Subject: Re: [Elecraft] K3: CW in SSB mode broken? > > > > Hi Ken, > > > > No, I think not. If I assert PTT and speak, I see plenty output power. If >I > > switch to CW mode and make CW, I see plenty output power. > > So it cannot be that... > > > > > > At 19:44 31/01/2012, Rose wrote: > > >Is the PWR set to "0"? > > > > > >73! > > > > > >Ken - K0PP > > ><mailto:elecraftcov...@gmail.com>elecraftcov...@gmail.com > > >On Tue, Jan 31, 2012 at 6:24 PM, Frank R. Oppedijk > > ><<mailto:fr...@qrd.nl>fr...@qrd.nl> wrote: > > >Hi, > > > > > >I'm not asserting PTT. If I did, I'd indeed be transmitting SSB, as > > >can be clearly heard on the monitor. So it must be yet something else... > > > > > > > > > > > >At 19:13 31/01/2012, you wrote: > > > >Even with VOX on, if you assert PTT along with CW keying, you will be > > > >transmitting in SSB mode, not CW. Try disconnecting PTT and see if it > > > >works... > > > > > > > > ~iain / N6ML > > > > > > > > > > > >On Tue, Jan 31, 2012 at 10:01 AM, Frank R. Oppedijk > > > <<mailto:fr...@qrd.nl>fr...@qrd.nl> wrote: > > > > > Hi Greg, > > > > > > > > > > Yes, I have tried with VOX on. I see the red TX led on the K3 come > > > > > on, I see the leftmost bar in the RF output lcd bar come on. But no > > > > > RF output on my external SWR meter. That SWR *does* show RF > > output > > > > > when I speak into the mike, or when I switch to CW mode and make > > CW. > > > > > > > > > > > > > > > At 18:35 31/01/2012, Greg wrote: > > > > >>Frank. Do you have VOX turned on or are you asserting PTT when > > > > >>sending the CW? > > > > >> > > > > >>73 > > > > >>Greg > > > > >>AB7R > > > > >> > > > > >> > > > > >>On 1/31/12, Frank R. Oppedijk <<mailto:fr...@qrd.nl>fr...@qrd.nl> > > wrote: > > > > >> > Hi group, > > > > >> > > > > > >> > Some time ago, I used to be able to send CW while in SSB mode, >but > > it > > > > >> > no longer works. I do have the SSB +CW option on (press 1 in > > > > >> > CONFIG:CW WGHT), and do have the CW sidetone when I key my > > paddle > > > > >> > while in SSB mode. But the K3 does not produce RF output. I'm >using > > > > >> > firmware version 04.39. > > > > >> > > > > > >> > Did anyone else notice this? Have I missed something? > > > > > > > > > > > > __________________________________________________________ > > ____ > > > > > Elecraft mailing list > > > > > Home: > > > > > <http://mailman.qth.net/mailman/listinfo/elecraft>http://mailman.qth.net/ > > mailman/listinfo/elecraft > > > > > Help: > > <http://mailman.qth.net/mmfaq.htm>http://mailman.qth.net/mmfaq.htm > > > > > Post: mailto:Elecraft@mailman.qth.net > > > > > > > > > > This list hosted by: <http://www.qsl.net/>http://www.qsl.net > > > > > Please help support this email list: > > > <http://www.qsl.net/donate.html>http://www.qsl.net/donate.html > > > > > >_________________________________________________________ > > _____ > > >Elecraft mailing list > > >Home: > > ><http://mailman.qth.net/mailman/listinfo/elecraft>http://mailman.qth.net > > /mailman/listinfo/elecraft > > >Help: > > <http://mailman.qth.net/mmfaq.htm>http://mailman.qth.net/mmfaq.htm > > >Post: mailto:Elecraft@mailman.qth.net > > > > > >This list hosted by: <http://www.qsl.net/>http://www.qsl.net > > >Please help support this email list: > > ><http://www.qsl.net/donate.html>http://www.qsl.net/donate.html > > > > > > > __________________________________________________________ > > ____ > > Elecraft mailing list > > Home: http://mailman.qth.net/mailman/listinfo/elecraft > > Help: http://mailman.qth.net/mmfaq.htm > > Post: mailto:Elecraft@mailman.qth.net > > > > This list hosted by: http://www.qsl.net > > Please help support this email list: http://www.qsl.net/donate.html > >______________________________________________________________ >Elecraft mailing list >Home: http://mailman.qth.net/mailman/listinfo/elecraft >Help: http://mailman.qth.net/mmfaq.htm >Post: mailto:Elecraft@mailman.qth.net > >This list hosted by: http://www.qsl.net >Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html