To: Elecraft Mailing List <elecraft@mailman.qth.net> Message-ID: <2012321125747.065893@home-5700c25bca> Content-Type: text/plain; charset="iso-8859-1"
"UPS showed up 20 minutes ago with my new P3SVGA board. Took about 15 minutes to install it. The power supply I use for the station has some AUX terminals on the back that are good for 5 amps so it was really easy to hook the new power cord supplied with the SVGA unit to those terminals. Now, when I switch the power supply on, the P3 comes up and waits for the K3 to be powered up. A little clunky, but once the mod is available to make the K3 supply a bit more current, I'll do that and then everything will be back to normal again." If you are like a few of us that run the K3 at ~15v, you will find no mod is necessary, and the P3SVGA runs happy all day Long from the K3 with no mod. That is my experience. My k3 runs at a custom HD cable/PS setup, K3 display shows 15.2v unkeyed and 14.8v keyed @ 110w. IM3 -36dB Adrian ... vk4tux ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html