Since you "buggered a couple screws", I suggest you buy yourself a new #1 phillip0s screwdriver. Get a good one and throw those worn ones away.
I replace the one I use at the workbench every 5 to 6 months. It is used every day, but I do not want to strip the heads on the screws in my customer's radios either. If you want to test your screwdriver, put a phillips screw on the tip and turn it so the screwdriver shaft is horizontal - if the screw falls off, the tip is worn and should be replaced. 73, Don W3FPR On 3/26/2012 9:08 PM, David F. Reed wrote: > Just wanted to chime in with the rest of you; I received my P3SVGA today. > installation was a snap (other than my buggering up a couple of the > screws on the top cover - replacements are on the way). > It works great! Thank you elecraft for making a great product even better! > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html