Nick, John, Rich, + Proofreading closely makes all things possible. As soon as it was suggested that I might have a coding error, it popped right out at me. I had the macro label in the macro code line. Of course the poor K3 did not know what to do with "10W" etc. Once again, thanks all for the feedback. W0BBI - Bill
Rich - K1HTV I followed your instructions for the "K3 Triple Macro" setup but for some reason I cannot get it to work. The macro cycles through the power setting when PF2 is pressed but the actual output power level remains the same, that is it it only affected by adjusting the power level manually. I must be missing something for sure so any additional direction would be helpful. Thanks Bill - W0BBI ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html